Mini-ITX Motherboards

You may also be interested in Pico-ITX motherboards

Mini-ITX Motherboard comparison chart

Socket Mini-ITX boards - require additional CPU
ModelChipsetSocketMax CPUPowerMax RAMLANIDESATA
GA-H61N-D2VH611155Quad Core35W-95W16GB104
JNF9F-H61H611155Quad Core35W-95W16GB104
H77N-WIFIH771155Quad Core35W-95W16GB204
JNF9E-Q77Q771155Quad Core35W-95W16GB206
H87I-PLUSH871155Quad Core35W-84W16GB106
H87-ITX-WIFIH871150Quad Core35W-84W16GB204+M
H87N-WIFIH871150Quad Core35W-84W16GB204
Z87N-WIFIZ871150Quad Core35W-84W16GB204
JNF9G-QM77QM87MobileQuad Core35W-84W16GB2-506+M
Socket Mini-ITX boards - with DC Input (Thin-ITX)
GA-B75TNB751155Quad Core35W-95W16GB104+M
GA-Q87TNQ871150Quad Core35W-84W16GB104+M
Mini-ITX with Integrated CPU
ModelChipsetPassiveFanCPUPowerMax RAMLANIDESATA
JNC9KSL-2500NM101.86GHzAtom~18W8GB202
JNC9KDL-2550NM101.86GHzAtom~20W8GB202
JNC9MGL-525NM101.8GHzAtom~20W4GB202
JNF94-270945GSE1.6GHzAtom~16W2GB112
JNF81-T56NE11.8GHzFusion~30W8GB205+M
JNC9E-525NM101.8GHzAtom~25W4GB2-514-8
JNF9D-2550NM101.86GHzAtom~25W4GB2-504
JNF99-525NM101.8GHzAtom~25W4GB2-506
D2500HNNM101.86GHzAtom~18W8GB102
D2550DC2NM101.86GHzAtom~25W8GB102
D2550ITXS-AGT6101.86GHzAtom~30W8GB102
E350NA451.6GHzFusion~30W16GB104
GA-C1037UNNM701.8GHzCeleron~30W16GB213+e
Mini-ITX with Integrated CPU and DC Input
ModelChipsetPassiveFanCPUPowerMax RAMLANIDESATA
JNF9C-2600NM101.6GHzAtom~16W2GB103+C
JNF9C-2800NM101.86GHzAtom~16W4GB103+C
JNC9NDL-2550NM101.8GHzAtom~20W4GB202
JNF92-270945GSE1.6GHzAtom~16W2GB1-412
JNC96-525NM101.8GHzAtom~30W4GB114
JNC9I-525NM101.8GHzAtom~30W4GB112
DN2800MTENM101.86GHzAtom~16W8GB102+M
D2550ITXS-BGT6101.86GHzAtom~30W8GB102
JNC9P-2550GT6101.86GHzAtom~30W8GB105

Notes: We include eSATA, mSATA and CFAST ports with SATA in this table: for example 4+e means 4x SATA ports and 1 eSATA ports, 2+M means 2x SATA ports and 1 mSATA socket. 3+C means 3x SATA and 1x CFAST. "1-4" means a board can be expanded to add additional SATA or LAN ports. Please see individual board description for full details. A 'Fanless' speed refers to a fanless board version. A 'Fan' figure is the heatsink/fan version. IDE is IDE slots - you can fit 2 IDE devices to one slot with appropriate cabling. Power consumption figures are approximate - actual power consumption will depend on power supply type and efficiency. Allow at least +10W for an AC Adapter/DC Converter PSU (e.g. PicoPSU and most of our case PSUs) and +30W for an ATX PSU.

Gigabyte GA-H77N-WiFi Socket 1155 Mini-ITX board with Dual LAN, 4x SATA and 802.11 WiFi

Gigabyte GA-H77N-WiFi Socket 1155 Mini-ITX board
£85.00 
  £102.00 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the GA-H77N-WiFi

You may also require:

2GB DDR3 1333 DIMM for GA-H77N-WiFi
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 DIMM for GA-H77N-WiFi
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1600 DIMM for GA-H77N-WiFi (3rd Gen CPUs only)
£35.00 
  £42.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1333 DIMM for GA-H77N-WiFi
£57.00 
  £68.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1600 DIMM for GA-H77N-WiFi (3rd Gen CPUs only)
£59.00 
  £70.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

GA-H77N-WiFi Backplate for C1/C2-RACK Chassis
£12.00 
  £14.40 inc. VAT
Lead time approx 6-10 days

Add a Processor:

Full CPU list here

Extended Power/LED and USB Cables for M350 Chassis
£4.00 
  £4.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

Akasa 7106HP Low Profile Heatsink
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

Dynatron K2 1U Heatsink
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

IBM PS/2 Keyboard/Mouse Y-Splitter Cable
£4.00 
  £4.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Gigabyte GA-H77N-WiFi Mini-ITX board with Intel H77 Express chipset supporting Intel 2nd and 3rd Gen Core LGA1155 processors with integrated Intel HD graphics and 8 channel Audio; PCI Express 3.0* x16; Up to 16GB of DDR3 RAM; 2x Gigabit LAN; 4x SATA with RAID 0, 1, 0+1, 5; 1x Half length Mini PCI Express slot; 1x DVI-I & 2x HDMI graphics outputs (supporting up to 1920x1200 resolution); S/PDIF; 4x USB 3.0 (inc 2 internal); 8x USB 2.0 (inc 2 internal); 802.11n/g/b (300 Mb/s) WiFi/Bluetooth 4.0 with Antennae. This motherboard supports Intel WiDi wireless display connectivity. * PCI Express 3.0 support is dependent on processor used and PCI-Express device capability.

Rear Panel Connectors: 4x USB 2.0; 2x 802.11n WiFi Antenna; PS2/Mouse Port; 2x USB 3.0 (coloured blue); 2x Gigabit LAN; 2x HDMI; 1x DVI-I; 5x switchable 3.5mm audio connectors; S/PDIF optical digital audio out.

Board connectors: 24pin ATX Main power connector (20pins can be connected, but the 12V P4 connector must be connected); Processor core power connector (12V 4pin P4); SATA connectors: 2x SATA 6Gb/s (coloured white), 2x SATA 3Gb/s (coloured black); 1x Front panel USB 2.0 header (for 2 ports); 1x Front Panel USB 3.0 header (19pin, for 2 ports); 1x Serial (COM) Port header; 2x 240-pin DDR3 DIMM Sockets; PCI Express 3.0 x16 bus add-in card connector (3.0 graphics cards supported only with 3rd Gen Core processor); Half-Height Mini-PCI Express card slot (populated with WiFi card); S/PDIF out header; Front panel audio header; Front Panel Connector (Power/Reset Button, power/HDD status LED); Clear CMOS Jumper; System and Processor fan headers.

Onboard RAID: The GA-H77N-WiFi supports Intel Rapid Storage Technology which provides the following RAID levels via the Intel H77 Express Chipset: RAID 0 - data striping; RAID 1 - data mirroring; RAID 0+1 (or RAID 10) - data striping and mirroring; RAID 5 - distributed parity.

Suitable Processors: he GA-H77N-WiFi board supports both 2nd and 3rd Gen Core processors. The GA-H77N-WiFi is *not* provided with a processor. Suitable 2nd and 3rd processors are available here or in the 'you may also require' section to the left.

Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the GA-H77N-WiFi with a standard Intel Socket 1155 heatsink: The CFI-A7879, ES32067, ES30068, ES34069, Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Heatsinks: The standard heatsink provided with 65W and 95W TDP CPUs will fit taller cases (including Compucase 8K01/8K07, Jou Jye 526/528/568). To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink and a 35W or 65W TDP CPU.

Typical M350 configuration: To use this board in the M350, we recommend the 150W AC Adapter and picoPSU-150-XT or picoPSU-160-XT together with a 65W TDP CPU and Akasa 7106HP or K25 heatsink or 35W TDP CPU and supplied heatsink, plus 1 or 2 sticks of DDR3 RAM and a 2.5in HDD/SSD (add an M350 HDD tray to use 2x HDD/SSDs).

M350 Cabling: The position of the FPANEL pins on this board is too far for the standard M350 power/LED cables to reach. Please purchase the extended M350 cables if this chassis is to be used.

Downloads: BIOS, Documentation and Drivers.

Package Contents: 2x SATA cables, 1x I/O back plate, 1x Driver and Software DVD, 1x Dual WiFi Antenna.

Suitable Memory: The GA-H77N-WiFi uses 1066/1333/1600MHz DDR3 memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here or in the 'you may also require' section to the left. DDR3 1600MHz is only supported with 3rd Gen (Ivy Bridge) processors.

Intel DQ67EP 2nd Gen Core Socket 1155 Mini-ITX Motherboard with vPro Remote Management

Intel DQ67EP 2nd Gen Core Socket 1155 Mini-ITX Motherboard
Long Lead Time

Larger image of the DQ67EP

You may also require:

2GB DDR3 1333 DIMM for DQ67EP
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 DIMM for DQ67EP
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1333 DIMM for DQ67EP
Long Lead Time

Add a Processor:

Full CPU list here

Akasa 7106HP Low Profile Heatsink
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

Dynatron K2 1U Heatsink
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 13:15 BST)
 

Intel DQ67EP Mini-ITX board with Q67 Express Chipset supporting Intel 2nd Gen Core FCLGA1155 processors and with integrated Intel HD graphics and 8 channel Realtek ALC 888 Audio; Up to 16GB of DDR3 1066/1333MHz RAM; Intel vPRO remote management technology; Intel 82579LM Gigabit LAN; 2x SATA 6Gb/s, 2x SATA 3Gb/s, 2x eSATA 3Gb/s; RAID 0, 1, 0+1, 5; DisplayPort, DVI-D & DVI-I graphics outputs; 2x USB 3.0; 8 USB 2.0 (inc 4 internal).

Rear Panel Connectors: Gigabit LAN; 2x USB 3.0; 4x USB 2.0; 2x eSATA; DVI-I; DVI-D; DisplayPort; 3x 3.5mm audio connectors.

Board connectors: Processor core power connector (12V 4pin P4); 3x Front panel USB 2.0 headers (for 6 ports); 2x 6Gb/s and 2x 3Gb/s SATA connectors; Serial Port Header; Main power connector (24pin ATX); Front panel header; 2x 240-pin DDR3 DIMM Sockets; Alternate front panel power LED header; Internal mono speaker header; Intel MEBX reset header; Intel FCFH header; LPC Debug connector; Processor fan header; System fan header; S/PDIF out header; PCI Express x16 bus add-in card connector; Mini-PCI Express connector; Chassis intrusion header; Front panel audio header; Battery.

Intel Technologies: Intel Advanced Management Technology (Intel AMT) 7.0; Intel Trusted Execution Technology (Intel TXT); Intel Fast Call for Help (Intel FCFH); Intel Virtualization Technology (Intel VT); Intel Virtualization for Directed I/O (Intel VT-d); KVM Remote Control. Note: vPro functionality requires a vPro compatible processor such as the i5-2400S.

Onboard RAID: The DQ67EP supports Intel Rapid Storage Technology which provides the following RAID levels via the Intel H67 Express Chipset: RAID 0 - data striping; RAID 1 - data mirroring; RAID 0+1 (or RAID 10) - data striping and mirroring; RAID 5 - distributed parity

Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the Intel DQ67EP with a standard Intel Socket 1155 heatsink: The ES32067, ES30068, ES34069, Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.

Suitable Processors: The DQ67EP is *not* provided with a processor. Full processor compatibility list
Suitable 2nd Gen processors are available here

Heatsinks: The standard heatsink provided with the CPU will fit taller cases (including Compucase 8K01/8K07, Jou Jye 526/528/568). To use this board in a low profile case (e.g. M300, M350) please use the Akasa 7106HP Low Profile heatsink. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink.

DQ67EP Download Center: BIOS, Documentation and Drivers

Suitable Memory: The DQ67EP uses DDR3 memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here.

Jetway JNF9F-H61 Long Life Socket 1155 Mini-ITX Board with up to 6x Serial Ports

Jetway JNF9F-H61 Long Life Socket 1155 Mini-ITX Board
£109.00 
  £130.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

More images of the Jetway JNF9F-H61

You may also require:

2GB DDR3 1333 SODIMM for JNF9F-H61
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 SODIMM for JNF9F-H61
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1333 SODIMM for JNF9F-H61
£57.00 
  £68.40 inc. VAT
Lead time approx 3-5 days

JNF9F-H61 Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

Add a Processor:

Full CPU list here

Akasa 7106HP Low Profile Heatsink
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

Dynatron K2 1U Heatsink
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 13:15 BST)
 

Jetway JNF9F-H61 Long Life Mini-ITX board supporting Intel 2nd* Gen Core FCLGA1155 processors with integrated Intel HD graphics and 6 channel Realtek ALC662 5.1 Audio; Up to 16GB of DDR3 1066/1333MHz RAM; Realtek RT8111EVL Gigabit LAN with Enhanced Surge Protection; 4x SATA 3Gb/s; DVI-D (up to 1920 x 1200) & VGA (up to 2048 x 1536) graphics outputs; 6x Serial Ports (inc 2 internal); 7x USB 2.0 (inc 4 internal); OC-CON High-Polymer Solid Capacitors; ECO-design for EuP/ErP; 8-bit Watchdog.

Long Life: The JNF9F-H61 is marked for long life production and is guaranteed to have a life cycle of 5 years or more.

Rear Panel Connectors: 3x USB 2.0; Gigabit LAN; 4x Serial Ports; DVI-D; VGA; 3x 3.5mm audio connectors.

Board connectors: PCI Express 2.0 x16 slot; Mini-PCI Express Slot (full size); 24-pin ATX Power Connector & 4-pin 12V ATX Power Connector (both must be connected); 2x Serial headers (COM6 supports RS232/422/485); 2x USB 2.0 headers (for 4 ports); 4x SATA 3Gb/s connectors; 2x DDR3 SODIMM Sockets; TPM header for optional TPM 1.2 module; GPIO header; CIR header; Parallel header; Front panel header; 3x Fan headers; 9-pin Front panel audio header; Battery.

Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the Jetway JNF9F-H61 with a standard Intel Socket 1155 heatsink: The ES32067, ES30068, ES34069, Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

*Suitable Processors: The JNF9F-H61 is *not* provided with a processor. This board supports most 2nd Gen Core processors including: i3-2100, i3-2100T, i3-2120, i5-2400S, i5-2405S, i5-2500, i7-2600S. The JNF9F-H61 can be BIOS-upgraded to support 3rd Gen Core processors (e.g. i3-3220T, i7-3770S) but this will require a 2nd Gen Core processor to perform the upgrade. Please contact us before purchasing if you would like us to do this for you (there may be a small charge). Suitable processors are available here

Heatsinks: The standard heatsink provided with the CPU will fit taller cases (including Compucase 8K01/8K07, Jou Jye 526/528/568). To use this board in a low profile case (e.g. M300, M350) please use the Akasa 7106HP Low Profile heatsink. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink.

Suitable Memory: The JNF9F-H61 uses DDR3 SODIMM memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Zotac Z68-ITX-A-E 2nd Gen Core Socket 1155 Mini-ITX Motherboard with 802.11n WiFi and dual LAN

Zotac Z68-ITX-A-E 2nd Gen Core Socket 1155 Mini-ITX Motherboard
Long Lead Time



More images of the Z68-ITX-A-E

You may also require:

2GB DDR3 1333 DIMM for Z68-ITX-A-E
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 DIMM for Z68-ITX-A-E
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1333 Value DIMM for Z68-ITX-A-E
£57.00 
  £68.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

Add a Processor:

Full CPU list here

Akasa 7106HP Low Profile Heatsink
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

Dynatron K2 1U Heatsink
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

OCZ Nocti 30GB mSATA SSD for Z68-ITX: 280 MBps (read) / 255 MBps (write)
Long Lead Time
 

Our most powerful dual LAN board!

Zotac Z68-ITX-A-E Mini-ITX board supporting Intel 2nd Gen Core FCLGA1155 processors; 7.1-channel Realtek ALC892 Audio; Up to 16GB of DDR3 1333MHz RAM; 2x Realtek 8111E Gigabit LAN; 4 SATA ports: 2x SATA 6Gb/s and 2x SATA 3Gb/s with RAID 0, 1, 0+1, 5; 2x HDMI, Mini DisplayPort graphics outputs; S/PDIF Optical output; 4x USB 3.0 (inc 2 internal); 4x USB 2.0 (inc 2 internal), 802.11b/g/n Mini-PCI Express WiFi Module and Antenna.

Rear Panel Connectors: 4x USB 2.0; 2x Wifi Antenna Connectors (Antennas provided); Clear CMOS Switch; Combined PS2 Mouse/Keyboard port; 2x USB 3.0; 2x Gigabit LAN; 2x HDMI Ports; Mini Display Port (Mini DP to DP adapter provided); 5x 3.5mm audio jacks; Optical S/PDIF Out.

Board connectors: 24pin ATX power connector and 8pin ATX 12V power connector; 1x USB 3.0 header (for 2 additional ports); 2x USB 2.0 headers (for 4 additional ports); Clear CMOS Jumper; SATA connectors: 2x 6Gb/s, 2x 3Gb/s; Serial Port (COM) header; Front panel header; Front panel audio header; Speaker header; 2x 240-pin DDR3 DIMM Sockets; CPU fan header; 2x SYS Fan headers; Half Height Mini-PCI Express slot (occupied by WiFi card, can also be used as an mSATA slot if the WiFi card is removed); PCI Express x16 Slot.

Onboard RAID: The Zotac Z68-ITX-A-E supports Intel Rapid Storage Technology which provides the following RAID levels via the Intel Z68 Express Chipset: RAID 0 - data striping; RAID 1 - data mirroring; RAID 0+1 (or RAID 10) - data striping and mirroring; RAID 5 - distributed parity.

Additional: Onboard LAN supports Wake On LAN (WOL) power management. PCI Express interface supports wake up functionality. Motherboard supports AC power failure recovery.

Package Contents: 4x SATA cables, 1x I/O back plate, 2x WiFi antennas, 1x 8pin power extension cable, 1x USB 3.0 header (full-size bracket), 1x USB 3.0 low-profile bracket; 1x Vertical mini-PCIe full height bracket; 1x mini-DP to DP adapter

Suitable Processors: The Zotac Z68-ITX-A-E is *not* provided with a processor. At product launch, this desktop board supports up to 130W TDP Intel i3, i5 and i7 2nd Gen Core processors. Suitable processors are available here

Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the Zotac Z68-ITX-A-E with a standard Intel Socket 1155 heatsink: The ES32067, ES30068, ES34069, Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.

picoPSU support: Due to the proximity of the ATX connector to the DIMM slots, it is only possible to fit one stick of memory into this board if a picoPSU is used.

Suitable Power Supplies: The picoPSU-160-XT & 192W AC Adapter or picoPSU-150-XT & 4pin 150W AC Adapter or 2.5mm Jack plug 150W AC Adapter combinations are both suitable for this motherboard. Only 4pin 12V needs to be connected to the 8pin ATX 12V connector.

Overclockable: Adventurous users can take advantage of the overclocking capabilities available on the Z68-ITX-A-Eto push 2nd Generation Intel Core K-series processors beyond the stock limits for an extra performance kick.

Heatsinks: The standard heatsink provided with the CPU will fit taller cases (including Compucase 8K01/8K07, Jou Jye 526/528/568). To use this board in a low profile case (e.g. M300, M350) please use the Akasa 7106HP Low Profile heatsink. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink.

Suitable Memory: The Zotac Z68-ITX-A-E uses DDR3 DIMM memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here.

Extended Warranty: Since Feb 2008, Zotac have provided an extended 5 year warranty on their motherboards. Please register with Zotac here within 28 days of purchase to qualify and for further details.

Intel D2500HN 1.86GHz Fanless Dual Core Atom Mini-ITX Board

Intel D2500HN Fanless Atom Mini-ITX Board
£55.00 
  £66.00 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Intel D2500HN

You may also require:

2GB DDR3 1333 SODIMM for D2500HN
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 SODIMM for D2500HN (if using one SODIMM, use SODIMM slot 1)
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

D2500HN Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Intel D2500HN 'Cedar Trail' motherboard with passively-cooled dual core Intel Atom D2500 processor running at 1.86GHz and Intel NM10 Express chipset. Integrated Intel GMA 3650 Video with VGA output; Up to 8GB of system memory (*see our note below regarding 64-bit video drivers); Intel 82574L Gigabit Ethernet Controller; 2+2 Channel Intel High Definition Audio; PCI connector.

This board can be considered a replacement/upgrade for the Intel D410MO and D425KT boards (though please consider the port and chipset differences).

Retail Unit complete with SATA cable, layout and back-panel stickers, product guide, Intel Express Installer driver and software DVD.

Rear Panel: VGA, Serial, Parallel, Combined PS/2 Keyboard or Mouse port, 4x USB 2.0, Gigabit Ethernet supporting LAN Wake with ACPI (Ping & Magic Packet), 3.5mm Line in, Line out & Mic in connectors.

Board Connectors: 24pin ATX Power connector (supports both 20pin and 24pin connectors), 2x DDR3 SODIMM Sockets; 2x SATA 3.0 Gb/s; 1x 32-bit PCI Slot; 2x 9-pin Front Panel USB Headers (supporting 4 additional USB 2.0 ports); Front Panel Header; Front Panel Audio header, S/PDIF out header, 1x Serial Port Header.

Suitable Cases: The D2500HN has a standard sized heatsink - all Mini-ITX cases with a power supply will fit. The board does not have an IDE port, so IDE devices cannot be connected (e.g. the CF reader on M200, M200-LCD, M300, M300-LCD).

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Recommended picoPSUs: All our picoPSUs will work with this board. If using one HDD, the picoPSU-80/90 and 60W/80W AC Adapter combination will be sufficient. A picoPSU with a 24pin ATX connector is not required.

Intel GMA 3600 Graphics: 400 MHz core frequency; High quality texture engine: DX9.3 and OpenGL 3.0 compliant, Hardware Pixel Shader 4.1, Vertex Shader Model 4.1; Video: Blu-ray 2.0, H.264 & VC1 hardware decoder, PAVP 1.1c, HDCP1.3.

*Support for 64-bit OS and 8GB Memory: This board operates in 64-bit mode and can address 8GB of memory. Intel's official support for this board is limited to 32-bit Windows (which can only address 3.5GB memory). No 64-bit video drivers are available, so 64-bit installations will have limited screen resolutions and no video acceleration. Screenshot of Linux operating in 64-bit mode here.

Drivers: Intel D2500HN product and driver pages.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Notes: The D2500HN supports up to 8GB DDR3 1333/1066 memory running at 1066MHz on 2x DDR3 SODIMMs. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Intel D2550DC2 1.86Hz Fanless Dual Core Atom Mini-ITX Board with HDMI, DVI-D and S/PDIF

Intel D2550DC2 Fanless Atom Mini-ITX Board
£59.00 
  £70.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Intel D2550DC2

You may also require:

2GB DDR3 1333 SODIMM for D2550DC2
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 SODIMM for D2550DC2 (if using one SODIMM, use SODIMM slot 1)
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

D2550DC2 Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Intel D2550DC2 'Cedar Trail' motherboard with passively-cooled dual core Intel Atom D2550 processor running at 1.86GHz and Intel NM10 Express chipset. Integrated Intel GMA 3650 Video with dual independent HDMI and DVI-D interfaces; Up to 8GB of system memory (*see our note below regarding 64-bit video drivers); Intel 82574L Gigabit Ethernet Controller; 5.1 Channel Intel High Definition Audio (Realtek ALC662 audio codec); PCI & Mini-PCI Express connectors.

This board can be considered a replacement/upgrade for the Intel D510MO and D525MW boards (though please consider the port and chipset differences).

Retail Unit complete with SATA cable, layout and back-panel stickers, product guide, Intel Express Installer driver and software DVD.

Rear Panel: S/PDIF optical audio out, HDMI, DVI-D (both outputs support up to 1920 x 1200 at 60 Hz), 4x USB 2.0, Gigabit Ethernet supporting LAN Wake with ACPI (Ping & Magic Packet), 3.5mm Line in, Line out & Mic in connectors.

Board Connectors: 24pin ATX Power connector (supports both 20pin and 24pin connectors), 2x DDR3 SODIMM Sockets; 2x SATA 3.0 Gb/s; 1x 32-bit PCI Slot; 1x Mini-PCI Express connector (support half and full length cards); 2x 9-pin Front Panel USB Headers (supporting 3 additional USB 2.0 ports); Front Panel Header; Front Panel Audio header, BIOS setup configuration jumper block.

Suitable Cases: The D2550DC2 has a standard sized heatsink - all Mini-ITX cases with a power supply will fit. The board does not have an IDE port, so IDE devices cannot be connected (e.g. the CF reader on M200, M200-LCD, M300, M300-LCD).

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Recommended picoPSUs: All our picoPSUs will work with this board. If using one HDD, the picoPSU-80/90 and 60W/80W AC Adapter combination will be sufficient. A picoPSU with a 24pin ATX connector is not required.

Intel GMA 3650 Graphics: 640 MHz core frequency; High quality texture engine: DX9.3 and OpenGL 3.0 compliant, Hardware Pixel Shader 4.1, Vertex Shader Model 4.1; Video: Blu-ray 2.0, H.264 & VC1 hardware decoder, PAVP 1.1c, HDCP1.3.

*Support for 64-bit OS and 8GB Memory: This board operates in 64-bit mode and can address 8GB of memory. Intel's official support for this board is limited to 32-bit Windows (which can only address 3.5GB memory). No 64-bit video drivers are available, so 64-bit installations will have limited screen resolutions and no video acceleration. Screenshot of Linux operating in 64-bit mode here.

Drivers: Intel D2550DC2 product and driver pages.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Notes: The D2550DC2 supports up to 8GB DDR3 1333/1066 memory running at 1066MHz on 2x DDR3 SODIMMs. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Fanless T1620 Thin-ITX Chassis for DN2800MT Thin-ITX Board

T1620 Chassis with UK Power Cord
£55.00 
  £66.00 inc. VAT
Lead time approx 1-2 weeks


More images of the T1620 Chassis

You may also require:

Intel DN2800MTE Fanless Thin-ITX Motherboard
£99.00 
  £118.80 inc. VAT
Lead time approx 6-10 days

2GB DDR3 1333 SODIMM for DN2800MT
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 SODIMM for DN2800MT (if using one SODIMM, use SODIMM slot 1)
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

Euro Power Cord for T1620
£3.00 
  £3.60 inc. VAT
  IN STOCK (Checked 13:15 BST)

US Power Cord for T1620
£3.00 
  £3.60 inc. VAT
  IN STOCK (Checked 13:15 BST)
 

Tiny 1.2 litre fanless case specifically designed *only* for the Intel DN2800MTE motherboard. Supplied with both VESA mounting bracket and vertical desk stand.

Construction: Heavy duty cast Aluminium construction with steel internal drive bracket.

Drive Bays: Supports 1x 2.5in HDD or SSD.

Front Panel: Power button; LED power or HDD indicator.

Power Supply included: 110-240V 60W External Universal AC Adapter; Internal power cable supplied with motherboard.

Desk/VESA Mounting: The case is supplied with both VESA adapter (75/100mm) and vertical desk stand. The VESA bracket can be used to attach the case to a wall.

Measurements: 38 x 178 x 178mm (1.5 x 7 x 7in); Volume: 1.2 litres.

Cooling: The T1620 is completely fanless. The case is supplied with a heat-transfer pad to assist cooling from the underside of the motherboard.

Supported boards: The T1620 *only* supports the Intel DN2800MTE motherboard.

Full case comparison, size and board compatibility chart

Jetway JNC92-330 Dual Core Atom Expandable Mini-ITX Board (Low Profile Heatsink)

Jetway JNC92-330 Atom Mini-ITX Board
Long Lead Time

You may also require:

1GB DDR2 800 DIMM for JNC92-330
£23.50 
  £28.20 inc. VAT
Lead time approx 1-3 days

2GB DDR2 800 DIMM for JNC92-330
£30.00 
  £36.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Jetway JNC92 Mini-ITX board with brand new low power consumption 45nm Dual Core Intel Atom 330 processor running at included. Intel 82945G (ICH7) chipset and GMA 950 graphics. Up to 2GB of DDR2 533/667MHz RAM supported; Realtek High Definition Audio; Supports Jetway daughterboard modules.

Expandable with a Jetway Daughterboard Module

Rear Panel Connectors: PS2 Mouse & Keyboard; Serial; VGA; 4x USB 2.0; 1x RTL8111C Gigabit LAN; 3x 3.5mm Audio (Line-out, Line-in and Mic-in).

Board connectors: 1x IDE 66/100/133; 2x SATA; 1x Floppy; 20 pin ATX power; 1x DDR2 DIMM socket; 2x additional USB 2.0 connectors on one 9 pin header; 2x Serial Port Headers; 1x Parallel Port Header; 1x PCI slot.

Case compatibility. Suitable cases: Most Mini-ITX cases including Jou Jye 528i, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with any picoPSU), C1-RACK, Travla C146,147,159 (with universal backplate), Thin Client, Travla C158 (CD supported), Travla C137 (CD supported), Compact Wall Mount Case (with HDD). Other cases supporting standard height heatsinks.

Note: The JNC92 supports DDR2 memory up to 2GB. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

Jetway JNC9KSL-2500 Fanless Dual Core Atom Mini-ITX Board with VGA and HDMI

Jetway JNC9KSL-2500 Fanless Mini-ITX Board
£69.00 
  £82.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

More images of the Jetway JNC9KSL-2500

You may also require:

2GB DDR3 1333 SODIMM for JNC9KSL-2500
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

JNC9KSL Backplate for C1/C2/C3-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Good replacement board for Intel Atom boards such as D2500HN, D2550DC2, D2550MUD2.

Extremely versatile Jetway JNC9KSL-2500-LF Dual Core 1.86GHz Cedar Trail Intel Atom D2500 powered Mini-ITX motherboard with Fanless operation, Intel NM10 Chipset, Integrated Graphics and VIA VT1705 6-Channel Audio Codec. Supports up to 4GB of DDR3 SODIMM memory (*see our note below regarding 64-bit video drivers and 8GB support). Ports available include: 2x Realtek RTL8111EVL 10/100/1000 Base-T Gigabit LAN, 2x SATA 3Gb/s, 32-bit PCI slot.

Long Life: Product availability forecasted at least to End 2013, provisionally to End 2015.

Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; 1x HDMI Port; 1x 10/100/1000 Realtek RTL8111EVL Gigabit LAN; 4x USB 2.0; 1x VGA Port; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 2x SATA 3Gb/s ports; 2x 9pin USB Connectors for 4x additional USB 2.0 Ports; 1x RS232 COM (Serial) Header; 1x Parallel Header; 1x 24bit single channel LVDS; 1x inverter; 1x Audio; 1x Front-Panel Connector; 1x CPU Fan; 1x Chassis Fan Connector.

Expansion: 1x 32-bit PCI slot.

Suitable cases & power supplies: The JNC9KSL-2500-LF has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases, apart from the JC200 and JC203.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Box contents: Motherboard, Manual, Driver CD, I/O shield, 2x SATA data cables, Serial port to pin header cable, 40mm CPU/Chipset Fan (optional but manufacturer recommended, does not add to the maximum height of the board).

Operating/Storage: 0~40 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board will get quite warm under load and is provided with an optional 40mm fan. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and suggest adding the optional fan if using a fanless case with this board (such as the M350 or Thin Client cases).

*Support for 64-bit OS and 8GB Memory: This board operates in 32-bit mode only and officially only supports 4GB. Intel's support for this chipset is limited to 32-bit Windows (which can only address 3.5GB memory). However the board will address 8GB of memory (as 2x 4GB DDR3 SODIMMs), and 64-bit support is enabled in the BIOS. Please note though that as no 64-bit video drivers are available, 64-bit installations will use generic drivers meaning limited screen resolutions and no video acceleration.

Memory Notes: The JNC9KSL-2500 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here. If using only one SODIMM, insert into SODIMM slot 2 (the lower slot).

Jetway JNC9KDL-2550 Fanless Dual Core Atom Mini-ITX Board with Dual LAN and VGA, HDMI

Jetway JNC9KDL-2550 Dual LAN Fanless Mini-ITX Board
£79.00 
  £94.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Jetway JNC9KDL-2550

You may also require:

2GB DDR3 1333 SODIMM for JNC9KDL-2550
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

JNC9KDL Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Replaces the JNC9KDL-2700

Extremely versatile Jetway JNC9KDL-2550-LF Dual Core 1.86GHz Cedar Trail Intel Atom D2550 powered Mini-ITX motherboard with Fanless operation, Intel NM10 Chipset, Integrated Graphics and VIA VT1705 6-Channel Audio Codec. Supports up to 4GB of DDR3 SODIMM memory (*see our note below regarding 64-bit video drivers and 8GB support). Ports available include: 2x Realtek RTL8111EVL 10/100/1000 Base-T Gigabit LAN, 2x SATA 3Gb/s, 32-bit PCI slot.

Long Life: Product availability forecasted at least to End 2013, provisionally to End 2015.

Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; 1x HDMI Port; 2x 10/100/1000 Realtek RTL8111EVL Gigabit LAN; 4x USB 2.0; 1x VGA Port; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 2x SATA 3Gb/s ports; 2x 9pin USB Connectors for 4x additional USB 2.0 Ports; 1x RS232 COM (Serial) Header; 1x Parallel Header; 1x 24bit single channel LVDS; 1x inverter; 1x Audio; 1x Front-Panel Connector; 1x CPU Fan; 1x Chassis Fan Connector.

Expansion: 1x 32-bit PCI slot.

Suitable cases & power supplies: The JNC9KDL-2550-LF has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases, apart from the JC200 and JC203.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Box contents: Motherboard, Manual, Driver CD, I/O shield, 2x SATA data cables, Serial port to pin header cable, 40mm CPU/Chipset Fan (optional but manufacturer recommended, does not add to the maximum height of the board).

Operating/Storage: 0~40 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board will get quite warm under load and is provided with an optional 40mm fan. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and suggest adding the optional fan if using a fanless case with this board (such as the M350 or Thin Client cases).

*Support for 64-bit OS and 8GB Memory: This board operates in 32-bit mode only and officially only supports 4GB. Intel's support for this chipset is limited to 32-bit Windows (which can only address 3.5GB memory). However the board will address 8GB of memory (as 2x 4GB DDR3 SODIMMs), and 64-bit support is enabled in the BIOS. Please note though that as no 64-bit video drivers are available, 64-bit installations will use generic drivers meaning limited screen resolutions and no video acceleration.

Memory Notes: The JNC9KDL-2550 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here. If using only one SODIMM, insert into SODIMM slot 2 (the lower slot).

Jetway JNC9MGL-525 Dual Core 1.8GHz Atom Mini-ITX Board with Dual LAN and up to 6x Serial Ports

Jetway JNC9MGL-525 Dual LAN Fanless Mini-ITX Board
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Jetway JNC9MGL-525

You may also require:

2GB DDR3 1333 SODIMM for JNC9MGL-525
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

JNC9MGL Backplate for C1/C2-RACK Chassis
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Extremely versatile Jetway JNC9MGL-525-LF Dual Core 1.8GHz Intel Atom D525 powered Mini-ITX motherboard with Intel NM10 Chipset, Integrated Intel GMA 3150 Graphics and Realtek ALC662 6-Channel Audio Codec. Supports up to 4GB of DDR3 SODIMM memory. Ports available include: 2x Realtek RTL8111EVL 10/100/1000 Base-T Gigabit LAN, 2x SATA 3Gb/s, 32-bit PCI slot, Mini PCI Express socket.

Long Life: Product availability forecasted at least to End 2013, provisionally to End 2015.

Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; 1x Serial (COM1); 1x Parallel; 1x VGA Port; 2x 10/100/1000 Realtek RTL8111EVL Gigabit LAN; 4x USB 2.0; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 2x SATA 3Gb/s ports; 1x 4pin and 1x 9pin USB Connectors for 3x additional USB 2.0 Ports total; 5x 9pin Serial Headers (COM2 supports RS232/485/422 and RS232 power, COM3-COM6 support RS232); 1x 4pin RS422/485 header (TX-RXCOM); 1x Power LED; 2x LAN Activity LED headers; 1x GPIO; 1x 18-bit single channel LVDS; 1x LVDS inverter; 1x S/PDIF Out; 1x Front Panel Audio; 1x Speaker; 1x Speaker header; 1x Front-Panel Connector; 1x 3pin CPU Fan; 2x 3pin System Fan Connectors.

Expansion: 1x 32-bit PCI slot; 1x Mini PCI Express socket.

Suitable cases & power supplies: The JNC9MGL-525-LF has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

Serial Ports: The JNC9MGL has 1x Serial Port on the back panel and pin headers for an additional 5x Serial Ports.

Box contents: Motherboard, Manual, Driver CD, I/O shield, 1x SATA data cable, 2x Serial port to pin header cables on removable PCI Backplates.

Operating/Storage: 0~40 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board is provided with a 40mm fan on the heatsink.

Memory Notes: The JNC9MGL-525 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF94-270 Long Life Fanless Atom Mini-ITX Board

Jetway JNF94-270 Long Life Fanless Atom Mini-ITX Board
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

More images of the Jetway JNF94-270

You may also require:

2GB DDR2 800 SODIMM for JNF94-270*
£30.00 
  £36.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Jetway JNF94-270 Fanless Atom motherboard. Fanless 1.6GHz Intel Atom N270 processor and integrated Intel GMA 950 Video. Intel 945GSE + ICH7M Chipset. Up to 2GB of DDR2 system memory on one SODIMM. Realtek RTL8111C Gigabit Ethernet and High Definition Realtek ALC662 Audio.

Long Life: Product availability forecasted at least to End 2014, provisionally to End 2015.

Power Consumption: Approximately 14W idle, 22W maximum power consumption.

Rear Panel Connectors: PS2 keyboard, VGA, DVI-D, Gigabit Ethernet, 4x USB 2.0 Ports, 2x Serial COM Ports (12V/5V selectable), Parallel Port, Line in, Line out & Mic in connectors.

Board Connectors: 1x 20-pin ATX power connector, 1x DDR2 SODIMM Socket, 1x 32-bit PCI, 2x SATA, 1x 40pin IDE, 1x RS232 COM port (COM3, 12V/5V selectable), 1x RS232/RS485/RS422 COM port (COM4, 12V/5V selectable), 1x 8bit GPIO, 1x 18bit dual channel LVDS, 2x Front Panel USB Header (for 4x USB 2.0 ports), 1x HDTV output, 2x DC Fan Headers, 1x CPU Smart Fan Header, Front Panel Header.

Case compatibility. Suitable cases: Most Mini-ITX cases including Jou Jye 528i, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with any picoPSU), C1-RACK, Travla C146,147,159 (with universal backplate), Thin Client, Travla C158 (CD supported), Travla C137 (CD supported), Compact Wall Mount Case (with HDD). Other cases supporting standard height heatsinks.

Operating temperature: Operates within 0~60 centigrade (Storage within -20~+85 centigrade).

Box contents: Motherboard, 2x SATA cables, Product Manual, 3 way IDE cable, I/O Shield, Driver and Software CD, HDTV pin header cable.

*Note: The JNF94 supports up to 2GB DDR2 memory on a DDR2 SODIMM, running at 533MHz.This is not compatible with DDR or standard DIMM memory. Fully tested DDR2 SODIMMs are available here.

Jetway JNC96-525 Fanless Dual Core Atom Mini-ITX Board with 12V DC Input

Jetway JNC96-525 Dual Core Atom Mini-ITX Board
Long Lead Time


More images of the Jetway JNC96-525

You may also require:

1GB DDR2 800 DIMM for JNC96-525
£23.50 
  £28.20 inc. VAT
Lead time approx 1-3 days

2GB DDR2 800 DIMM for JNC96-525
£30.00 
  £36.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB 44pin IDE Flash Module for JNC96-525
Long Lead Time

60W AC Adapter for JNF92-270 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

80W AC Adapter for JNF92-270 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

More 12V AC Adapters

 

Jetway JNC96-525 Atom motherboard with 12V DC Input. Integrated Fanless 45nm 1.83GHz Intel Atom D525 processor with integrated Intel GMA 3150 Video. Intel NM10 Express Platform Controller Host (PCH) Chipset. Up to 4GB of DDR2 system memory; Realtek 8111DL 1000Base-T Gigabit Ethernet and High Definition Audio. Realtek ALC662 audio subsystem.

Rear Panel Connectors: PS2 mouse and keyboard, VGA, 4 x USB ports, 1000 Base-T Ethernet, RS-232, 12 Volts DC in, Parallel Port, Line in, Line out & Mic in connectors.

Board Connectors: 4x SATA, 1x 44pin IDE, 1x Mini-PCI Express, 1x PCI, 1x RS232/RS485/RS422, 2x Chassis Fan Headers, Front Panel Header, 3x Front Panel USB Header, Front Panel Audio header. 2x DDR2 DIMM Socket, 1x LVDS header, 1x Inverter header, 1x GPIO.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The Jetway JNC96-525 requires a 12V AC Adapter to power the board directly and feeds power to up to 2 other SATA devices through an on-board male Molex connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 2x HDDs or Slimline Optical Drives*, but we *do not* recommend powering a full size optical drive.

Powering devices: A cable with female Molex to 2x SATA power connectors is provided, suitable for powering up to 2x SATA 2.5in or 3.5in HDD/SSD. Other devices (including PATA/SATA slimline optical drives and CF cards) will require additional cables. Please use the cables linked on the left, or email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are fully compatible with the JNC96-525: M350 (highly recommended), Nexus Psile.

Partially compatible cases (without PSU): M200, M300, M200-LCD, M300-LCD include 40pin IDE CF Adapters which cannot be used without an appropriate cable, as this board has a 44pin IDE port.

Suitable cases (with PSU): The following enclosures have a PSU which can be bypassed and are compatible with the JNC96-525: , Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05 and Jou Jue NU-528i, NAS Chassis (up to 2 drives)

Unsuitable/untested cases: Some cases are currently untested though they are likely to work if the PSU is bypassed, including Travla C158, Thin Client, Compact Wall Mount and all Cubid cases.

Box contents: Motherboard, 2x SATA cables, Product Manual, Molex to 2x SATA power cable, 44pin to 44pin IDE cable, I/O Shield, Driver and Software DVD. 12V AC Adapter not included - these can be found here.

Note: The JNC96 supports 4GB DDR2 memory up to 2GB per DIMM. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

Jetway JNF9C-2600 Long Life Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input and CFAST

Jetway JNF9C-2600 Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input
£99.00 
  £118.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Jetway JNF9C-2600

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2600 (1 stick supported)
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

60W AC Adapter for JNF9C-2600 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

80W AC Adapter for JNF9C-2600 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.6GHz Intel Atom N2600 processor and integrated PowerVR SGX 545 (GMA 3600@400MHz) Graphics. Intel NM10 Chipset. Up to 2GB of DDR3 system memory on one SODIMM. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to End 2015.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x SATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2600 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2600: M350 (highly recommended), M200, M300, M200-LCD, M300-LCD. Please note M200/M300 CF adapters are IDE and will not function. The JNF9C-2600 of course has on-board CFast.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2600 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

Note: The JNF9C-2600 supports up to 2GB DDR3 memory on a DDR3 SODIMM. This is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF9C-2800 Long Life Fanless 1.86GHz Atom Thin-ITX Board with 12V DC Input, 4GB Support and CFAST

Jetway JNF9C-2800 Fanless 1.86GHz Atom Thin-ITX Board with 12V DC Input
£109.00 
  £130.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Jetway JNF9C-2800

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2800 (2 sticks supported)
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

60W AC Adapter for JNF9C-2800 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

80W AC Adapter for JNF9C-2800 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.86GHz Intel Atom N2800 processor and integrated PowerVR SGX 545 (GMA 3650@640MHz) Graphics. Intel NM10 Chipset. Up to 4GB of DDR3 system memory on 2x 2GB SODIMMs. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to End 2015.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x SATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2800 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2800: M350 (highly recommended), M200, M300, M200-LCD, M300-LCD. Please note M200/M300 CF adapters are IDE and will not function. The JNF9C-2800 of course has on-board CFast.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2800 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

Note: The JNF9C-2800 supports up to 4GB DDR3 memory on 2x 2GB DDR3 SODIMMs (our pictures are of the JNC9C-2600, which has 1 slot). DDR3 is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNC9C-550 Fanless Dual Core Atom Mini-ITX Board with Dual LAN, 4x SATA and Daughterboard Expansion

Jetway JNC9C Dual LAN Fanless Expandable Mini-ITX Board
Long Lead Time


More images of the Jetway JNC9C-550

You may also require:

2GB DDR3 1333 SODIMM for JNC9C-550*
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

3x Gigabit LAN Daughterboard Module
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

3x Gigabit LAN Daughterboard Module (Intel 82541PI chipset)
£45.00 
  £54.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

JNC9C Backplate for C1/C2-RACK
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

End of Life due to Intel's discontinuation of N550 CPU. Please consider JNC9C-455 or JNC9E-525

Extremely versatile Jetway JNC9C-550-LF Dual Core 1.5GHz 64-bit Intel Atom N550 powered Mini-ITX motherboard with Fanless operation, Jetway Daughterboard Expansion, Intel NM10 Express Chipset, Integrated Intel GMA3150 Graphics and Realtek ALC662 6-Channel Audio Codec. Supports up to 2GB of DDR3 1333MHz SODIMM memory. Ports available include: 2x Realtek 10/100/1000 Base-T Gigabit LAN, 4x SATA 3Gb/s (2 ports have RAID 0/1), 1x 44pin IDE.

Jetway JNC9C Mini-ITX motherboards have a unique expansion module slot to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports and more are all available.

Expandable with a Jetway Daughterboard Module

JNC9C/JNC9E range differences: The JNC9C-455, JNC9C-550 and JNC9E-525 range are mechanically identical but with different CPUs. The low power consumption N455 CPU in the JNC9C-455 runs at about 60% of the speed of the N550 in the JNC9C-550. The N550 runs at 80% of the speed of the D525 in the JNC9E-525. The JNC9E-525 can additionally support 4GB RAM.

Rear Panel Connectors: 1x Combined PS/2 Keyboard or Mouse; 2x 10/100/1000 Realtek 8111E Gigabit LAN; 1x VGA Port; 1x Serial COM Port; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out); 4x USB 2.0 Ports.

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2GB max on the board); 4x SATA ports up to 3GB/s (2x Intel NM10 integrated SATA controller, 2x JMB363 SATA Controller with RAID 0,1 support); 1x 44pin IDE Connector; 2x 9pin USB Connectors for 4x USB 2.0 Ports; 1x RS232/RS422/RS485 COM (Serial) Header; 1x Parallel Header; 1x 18bit LVDS; 1x GPIO; 1x Front-Panel Connector; 1x CPU Smart Fan; 1x DC Fan Connector.

Expansion: 1x 32-bit PCI slot; 1x Mini-PCI Express Slot; 1x 120pin Jetway Embedded PCI Daughterboard Expansion Slot.

Graphics: Integrated Intel GMA3150 Graphic Engine with Core Frequency of 400MHz. DirectX 9.0c and OpenGL 1.4 compliant Hardware Pixel Shader 2.0. Supports VGA output resolution up to 2048 x 1536.

*Memory Configurations: The Jetway JNC9C board supports 2GB maximum across both slots: valid JNC9C DDR3 SODIMM configurations are 1GB + 0GB, 1GB + 1GB and 2GB + 0GB.

Suitable cases & power supplies: The JNC9C has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases.

Box contents: Motherboard, I/O shield, SATA data cable, Serial port to pin header cable, 44pin to 44pin IDE cable.

Operating/Storage: 0~60 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Note: The JNC9C uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF99-525 Long Life Fanless Dual Core Atom Mini-ITX Board with Dual LAN, 6x SATA and Daughterboard Expansion

Jetway JNF99 Dual LAN Fanless Expandable Mini-ITX Board
£139.00 
  £166.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Jetway JNF99-525

You may also require:

2GB DDR3 1333 SODIMM for JNF99-525
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

3x Gigabit LAN Daughterboard Module
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

3x Gigabit LAN Daughterboard Module (Intel 82541PI chipset)
£45.00 
  £54.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

JNF99 Backplate for C1/C2-RACK
£10.00 
  £12.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

 

Extremely versatile Jetway JNF99-525-LF Dual Core 1.8GHz 64-bit Intel Atom D525 powered Mini-ITX motherboard with Fanless operation, Jetway Daughterboard Expansion, Intel ICH9R Chipset, Integrated Graphics and VIA VT1705 6-Channel Audio Codec. Supports up to 4GB of DDR3 1066/1333MHz SODIMM memory. Ports available include: 2x Intel 82574L 10/100/1000 Base-T Gigabit LAN, 6x SATA 3Gb/s (supporting RAID 0, 1, 5, 10 & JBOD), USB 3.0, PCI and Mini-PCI Express.

Long Life: Product availability forecasted at least to End 2014, provisionally to End 2015.

Jetway JNF99 Mini-ITX motherboards have a unique expansion module slot to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports and more are all available.

Expandable with a Jetway Daughterboard Module

Rear Panel Connectors: 1x Combined PS/2 Keyboard or Mouse; 2x USB 3.0; 1x VGA Port; 1x Serial COM Port; 2x 10/100/1000 Intel 82574L Gigabit LAN; 3x USB 2.0 Ports; 3x 3.5mm Audio (Line-in; Mic-In; Stereo-Out).

Board connectors: 1x 24pin ATX Connector (works with 20pin or 24pin); 2x DDR3 SODIMM slots (2x 2GB max); 6x SATA 3Gb/s ports (with RAID 0, 1, 5, 10 & JBOD support); 3x 9pin USB Connectors for 6x additional USB 2.0 Ports; 1x RS422/RS485 COM (Serial) Header; 1x Parallel Header; 1x 32bit LVDS; 1x GPIO; 1x Audio; 1x Front-Panel Connector; 1x CPU Smart Fan; 1x DC Fan Connector.

Expansion: 1x 32-bit PCI slot; 1x Mini-PCI Express Slot; 1x 120pin Jetway Embedded PCI Daughterboard Expansion Slot.

Suitable cases & power supplies: The JNF99 has a standard sized heatsink and can be powered by 20pin and 24pin ATX power connectors. Compatible with all our picoPSUs and Mini-ITX cases.

Box contents: Motherboard, Manual, Driver CD, I/O shield, 6x SATA data cables, Serial port to pin header cable.

Operating/Storage: 0~60 centigrade operating temperature. -20~85 centigrade storage temperature.

Cooling: This board has no fan and will get quite warm under load. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and strongly suggest adding a fan if using a fanless case with this board (such as the M350 or Thin Client cases).

Memory Note: The JNF99 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Gigabyte E350N Dual Core Mini-ITX Board with Radeon HD 6310 and 4x SATA

Gigabyte E350N Dual Core Mini-ITX Board with Radeon HD 6310
£59.00 
  £70.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Gigabyte E350N

You may also require:

2GB DDR3 1333 DIMM for E350N
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 DIMM for E350N
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1333 DIMM for E350N
£57.00 
  £68.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

Short Molex HDD to 12V P4 Power Cable
£3.50 
  £4.20 inc. VAT
  IN STOCK (Checked 13:15 BST)
 

Excellent value Gigabyte E350N motherboard with Dual-Core 1.6GHz AMD E-350D processor and integrated AMD Radeon HD 6310 DirectX 11 / OpenGL 4.1 graphics and AMD A45 FCH (Fusion Controller Hub) chipset. Up to 16GB of system memory; 4x SATA 3Gb/s; PCI Slot; Realtek Gigabit Ethernet; Realtek High Definition 7.1 Channel Audio.

Rear Panel: Mouse PS/2 port; Keyboard PS/2 port; 1x Parallel port; 1x Serial port; VGA; HDMI (supporting up to 1920 x 1200); 4x USB 2.0 ports; 1x Gigabit Ethernet; 3x 3.5mm configurable audio connectors.

Board Connectors: 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 1x 12v P4 connector (needs to be connected); 4x SATA 3Gb/s ports; 4x USB 2.0 connectors on 2x 9pin headers; 32-bit PCI slot; 2x DDR3 DIMM sockets (up to 8GB per socket); 1x System Fan Header; 1x Processor Fan Header; 1x Front Panel Connector; 1x S/PDIF Out header; 1x Chassis Intrusion header.

Unique Features: 60mm x 60mm fan; Support for @BIOS; Q-Flash; Xpress Install; Xpress Recovery2; EasyTune; Smart Recovery; Auto Green; ON/OFF Charge; Q-Share. Bundled Norton Internet Security (OEM version).

Case compatibility. The E350N has a standard height heatsink and low power requirements. A 20pin or 24pin ATX connector can be used but the 12V P4 connector must also be connected. Check individual case descriptions and add the Molex to P4 Power Cable option where necessary. All our Mini-ITX cases will fit the board including but not exclusively Jou Jye 528i/568i/526i, CFI Chassis, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with a picoPSU fitted with a 12V P4 output, no front panel USB), Travla C146, T1200, C159, Thin Clients, Travla C158 (inc CD drive), Compact and Lockable Wall Mount Cases.

M350 Compatibility: The E350N will work with the M350 (picoPSU-90, 60W or 80W AC Adapter recommended) though the 2x USB connectors behind the front panel of the M350 cannot be fitted due to close proximity of the picoPSU and USB header cable.

Box contents: Motherboard, 2x SATA cables, Product Guide, I/O Shield.

Memory: The E350N supports up to 16GB DDR3 memory on 2x DDR3 DIMMS. This is not compatible with DDR2 memory. Fully tested DDR3 DIMMs are available here.

Jetway JNF81-T56N Dual LAN AMD Fusion Mini-ITX Motherboard

Jetway JNF81-T56N Dual LAN AMD Fusion Mini-ITX Motherboard
£139.00 
  £166.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Jetway JNF81-T56N Dual LAN

You may also require:

2GB DDR3 1333 SODIMM for JNF81-T56N
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 SODIMM for JNF81-T56N
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

Intel 525 30GB mSATA SSD for JNF81-T56N
£49.00 
  £58.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

Intel 525 60GB mSATA SSD for JNF81-T56N
£79.00 
  £94.80 inc. VAT
  IN STOCK (Checked 13:15 BST)

Intel 525 120GB mSATA SSD for JNF81-T56N
£129.00 
  £154.80 inc. VAT
Lead time approx 3-5 days
 

Jetway JNF81-T56N Dual LAN AMD Fusion motherboard with Dual-Core 1.6GHz AMD (long life) T56N processor and dual Gigabit LAN. Featuring integrated AMD Brazos eOntario + Hudson E1 Chipset. Up to 8GB of system memory; 2x Realtek RTL8111E Gigabit Ethernet; VIA VT1705 6 Channel Audio; 5x SATA 6Gb/s with RAID 0,1,5,10 support.

Long Life: Product availability forecasted at least to End 2015.

Rear Panel: Combined Mouse/Keyboard PS/2 port; 6x USB 2.0 ports; HDMI, DVI. VGA; 2x Gigabit Ethernet; 3x 3.5mm audio connectors.

Board Connectors: PCI slot; Mini-PCI Express slot; mSATA connector (for mSATA SSDs); 4x USB 2.0 connectors on 2x 9pin header; 2x DDR3 SODIMM sockets; 5x SATA 6Gb/s ports; 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 1x 24 bit Dual Channel LVDS header; 1x COM port header; 1x GPIO header; 1x CIR header; 1x Front Panel Connector; 1x 3pin System Fan Header; 1x 3pin Processor Fan Header.

Case compatibility. The JNF81-T56N has a standard height heatsink and low power requirements. All our Mini-ITX cases will work including but not exclusively Jou Jye 528i/568i/526i, CFI Chassis, Noah 3988, Chenbro NAS, Venus 669, M200/M300/M350 (with any picoPSU), Travla C146,T1200,C159, Thin Clients, Travla C158 (CD may not be supported), Compact and Lockable Wall Mount Cases.

Operating temperature: Operates within 0~50 centigrade (Storage within -20~+85 centigrade).

Box contents: Motherboard, 3x SATA cables, Product Guide, I/O Shield, 2x WiFi Antenna, DVI to VGA adapter.

Memory: The JNF81-T56N supports up to 8GB DDR3 memory on 2x DDR3 SODIMMS running at 1066MHz. This is not compatible with DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Zotac E2-1800ITX Wi-Fi Fanless Dual LAN Mini-ITX Motherboard

Zotac E2-1800 Wi-Fi Mini-ITX Motherboard
  SPECIAL OFFER - was £119.00
£89.00 
  £106.80 inc. VAT
  IN STOCK (Checked 13:15 BST)


More images of the Zotac E2-1800 Wi-Fi

You may also require:

2GB DDR3 1333 SODIMM for E2-1800
£20.00 
  £24.00 inc. VAT
  IN STOCK (Checked 13:15 BST)

4GB DDR3 1333 SODIMM for E2-1800
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 13:15 BST)

8GB DDR3 1333 SODIMM for E2-1800
£57.00 
  £68.40 inc. VAT
Lead time approx 3-5 days

 

Zotac E2-1800ITX-A Wi-Fi Mini-ITX motherboard with Dual-Core 1.7GHz AMD E2-1800 APU/processor and Fanless Heatsink by Coolermaster. Featuring integrated AMD Radeon HD 7340 DirectX 11 / OpenGL 4.1 graphics and AMD M3L chipset. Up to 16GB of system memory; Dual Gigabit Ethernet; High Definition 5.1 Channel Audio; 802.11g/n WiFi & Bluetooth 4.0.

Rear Panel: 2x WiFi Antenna; Reset Switch; Combined Mouse/Keyboard PS/2 port; 4x USB 2.0 ports; DVI (VGA adapter supplied); HDMI, 2x Gigabit Ethernet; 2x USB 3.0 ports;3x 3.5mm audio connectors.

Board Connectors: PCI Express x16 slot; 1x vertical Mini-PCI Express slot (occupied by short-height WiFi card); 1x Full Length Mini-PCI Express Slot with mSATA support; 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 2x SATA 6Gb/s ports; 2x DDR3 SODIMM sockets; 1x RS232 Serial Port Connector on 9pin header; 2x USB 2.0 connectors on 1x 9pin header; 1x Front Panel Connector; 1x 4pin System Fan Header.

Case compatibility. The E2-1800 has a standard height heatsink and low power requirements. All our Mini-ITX cases will work including but not exclusively M350, M5XP, Jou Jye 528i/568i/526i, CFI Chassis, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, Thin Clients, Travla C158 (CD may not be supported), Compact and Lockable Wall Mount Cases.

Box contents: Motherboard, 2x SATA cables, Product Guide, I/O Shield, 1x mini-Optical Adapter; 2x WiFi Antenna, DVI to VGA adapter.

Memory: The E2-1800 supports up to 8GB DDR3 memory on 2x DDR3 SODIMMS running at 1066MHz. This is not compatible with DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Extended Warranty: Since Feb 2008, Zotac have provided an extended 5 year warranty on their motherboards. Please register with Zotac here within 28 days of purchase to qualify and for further details.


Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.


Reckoner

Cards accepted:
Secure Shopping:

Contact Us

Store: +44 (0) 845 475 8 475

Store enquiries: store@mini-itx.com

Other enquiries: feedback@mini-itx.com

Visit the Store

Click here to enter the online store

Social

Follow us on Twitter!

Join our Mailing List

Copyright: All content on this site is Copyright © 2002-2014 Mini-ITX.com and respective owners, all rights reserved.