Intel® 915GM + ICH6M chipset Intel Core Mobile 17x17cm Mini-ITX motherboard with Gigabit LAN, VGA and S-Video Outputs, IDE, 2x SATA, 7.1 Audio, Firewire and 4x USB 2.0 Ports. Expansion possible through PCI slot. Universal External 90W AC Adapter provides power for board and HDD, CDROM etc. Supports Intel® Celeron and Pentium M Mobile processors (479-pin) with up to a 533MHz system bus. Supports up to 2GB in two DDR2 DIMM sockets (fully tested DIMMs are available).

Rear Panel I/O Ports: AC Power Adapter Connector; 1x PS/2 mouse; 1x PS/2 keyboard; S-Video; Firewire 1394; Gigabit LAN; Serial; 4x USB 2.0; 6x 3.5mm Audio Jacks for Realtek Azalia Codec ALC880 7.1 Audio: Line-In, Mic-In, Speaker Out; Centre/Subwoofer; Rear Surround; Side Surround.

Motherboard I/O: 4-pin 12V Connector (to power additional devices); 1x IDE (ATA 100); 2x Serial ATA; CPU Fan; System Fan; FPANEL; 4x Additional USB ports; COM; Firewire; CD_IN.

Included accessories: Universal 110-240V External 90W AC Adapter (19V 4.7A); I/O Shield; Easy Install Guide and Manual; 80-wire IDE cable; Serial ATA cable; Serial ATA Power cable; Molex Power Splitter Cable (Motherboard to 2x HDD); YPbPr converter cable from S-Video port; Low profile CPU Cooler and fan (very quiet in our tests).

Case Compatibility: The AOpen i915GMt-FSA comes with a Fanless External AC Adapter, removing the need for case power supply. Slimline Optical Drives: When using a slimline optical drive you will need an additional Molex Power Splitter Cable (HDD and Floppy connector) to power the drive.

CPU Compatibility: The AOpen i915GMt-FSA is compatible with the following CPUs: Celeron M 350; Celeron M 360; Celeron M 370; Celeron M 380; Celeron M 390; Pentium M 715; Pentium M 725; Pentium M 735; Pentium M 745; Pentium M 755; Pentium M 765; Pentium M 730; Pentium M 740; Pentium M 750; Pentium M 760; Pentium M 770; Pentium M 780.

Compatible cases (all powered using the provided AC Adapter): Cubid 2699V, Cubid 3677, Cubid 3677, Media Case, M200, M300, Nexus Psile, M300 Voom PC, Voom PC 2, Venus (full size optical drive not recommended).

Cases that will not work with the i945GTt-VFA: T2e, C134, C156 (none of these cases will fit the board). Cases that may work with a low profile heatsink: C14x, C158, C159 (all due to be tested).

Manufacturers specifications

Socket 479 Celeron® M CPU suitable for 400MHz FSB Celeron/ Pentium M motherboards, including the DFI G5M100-N, G5M150-N and G5G100-P.

Intel® Celeron® M processor 370, 90 nm process, 1MB L2 cache, 1.50 GHz clock speed, 400MHz front side bus.

Socket 479 Pentium® M CPU suitable for 533MHz FSB Pentium M motherboards, including the AOpen i915GMt-FSA and DFI G5M150-N and G5G100-P.

Intel® Pentium® M processor 730, 2MB L2 cache, 1.6 GHz clock speed, 533MHz front side bus.

Please note: The estimated arrival date for these CPUs is 7th June 2007. We cannot source these sooner - we have to wait for Intel to manufacture them! We suggest ordering a different CPU unless you have a very specific requirement for this speed.

The AOpen i945GMt-FA and i945GTt-VFA motherboards come with several cables, but none have a floppy style connector.

If you are planning on using a slimline optical drive, you will need this cable.