Jetway JBC362W WiFi Dual LAN Barebones System
VIA ARTiGO A1200 Fanless, Dual LAN, Dual Serial Slim PC
Cables and Accessories
Dual USB 2.0 & Dual Firewire PCI Backplate
Slimline Optical to IDE Adapter & Audio Cable
256x64 Pico-LCD Auxiliary Display Kit and USB Connectors
M2-ATX-HV 140W Intelligent Wide Input Vehicle DC-DC Power Supply
CFI-A2060 Mini-ITX Chassis 400W (2 Hot Swap Bays + PCI)
Jetway JBC362W Fanless Dual LAN Barebones System with WiFi
VIA ARTiGO A1200 Slim PC Kit: Fanless, Dual LAN, Dual Serial, WiFi Ready
Build your own ARTiGO A1200 Dual LAN Slim PC System
Build your own ARTiGO A1200 System using the configurator below. If an item is out of stock it will be ordered for you. Please note: 300MBps WLAN operation requires 2x Antenna.
PCI Backplate to add extra ports to your Mini-ITX Project. A backplate is provided with the EPIA M, but is not provided with any other boards.
Connects directly to the pin headers on the motherboard, and fits into any spare PCI slot in your case. Provides additional up to 2x USB 2.0 and 2x 1394 Firewire connectors, depending on your specific motherboard.
The Slimline CD to Desktop IDE Adapter is an adapter used for converting a standard ATA laptop CD-ROM or DVD drive with a standard 50-pin connector to a desktop enhanced IDE 40-pin connector. Power is supplied through a 3.5in 4 pin mini connector (i.e. floppy connector).
Audio cable included.
Suitable for use with Panasonic CW-8124, UJ-845, Sony Optiarc 7590A, 7593A, 7630A and many more ATA Slimline Optical drives. Not suitable for SATA Slimline Optical drives.
Check the case description - some cases come with these as standard (e.g. most Morex, Chenbro etc.)
For connecting motherboards with IDE connectors to an ATA Slimline Optical Drive.
Pico-LCD is a 256x64 pixel USB LCD backlit display module suitable for displaying real time graphics, system status, stocks, weather, RSS feeds, music information, news and sports updates with Vista Sideshow or Linux drivers on a 2nd dedicated LCD display. Monitor MRTG generated graphics from any remote systems and create your own python scripts for displaying your data (included in Linux package).
This device is compatible with Windows 7 & Vista sideshow. Linux is well-supported and this device has the ability to work with all LCD4Linux plugins as well as the facility to output MRTG graphs. The device can be programmed with a custom boot logo.
Compatibility: Windows XP, Vista & 7 (32-bit) and Linux (32/64-bit).
Sample applications provide Windows and Linux platform support with open source code and SDK available on our drivers page.
Provided with two USB cables for internal connection to a USB pin header or external connection to a USB socket.
The unit is designed for use in projects and does not come with any mounting or bracket.
Specifications: Display Dimensions: 39 x 121mm (1.55 x 4.77 in). Pico-LCD Dimensions: 39 x 137 x 14mm (1.55 x 5.39 x 0.56 in).
You may also require (see notes*)
Designed to provide power and to control the ON/OFF switch of a motherboard (PC) based on ignition status, M2-ATX-HV is a wide input (6-32V) vehicle or general purpose battery powered application DC-DC ATX power supply capable of surviving tough car engine cranks (down to 5.7V) as well as transient over-voltage situations.
8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car timing schemes. While in deep sleep mode, M2-ATX-HV constantly monitors your car battery voltage levels, automatically shutting down until battery levels reach safe levels.
M2-ATX-HV comes equipped with ATX, Molex HDD, SATA HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V or 24V car/boat/RV battery and power up your PC.
Designed to work with your own projects or the VoomPC and VoomPC 2, but is also a direct size compatible replacement with Morex 26xx, 27xx, 36xx, Travla C134, C150, C158, C159, Compact Wall Mount cases. Dimensions: 45mm x 160mm (1.77in x 6.31in). 160W Output - ideal for Socket Mini-ITX boards. Not compatible with EPIA PD boards.
*Notes: If your board has a 4 pin 12V P4 power connector, you will need add a Molex to 12V P4 Power Cable or 12V P4 to 12V P4 Power Cable.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.