Asus H81T motherboard with extremely low "Thin-ITX" profile. Intel H81 chipset featuring DVI-I, HDMI 1.4a interfaces and internal LVDS connector; Up to 16GB of system memory; Realtek 8111G Gigabit Ethernet; Realtek ALC8870VD High Definition Audio; 8-channel (7.1) Intel High Definition Audio via the HDMI interface; eSATA; 1x Half-Size Mini-PCI Express connector plus a dedicated mSATA slot.
Retail Unit complete with half-height thin Mini-ITX I/O shield; SATA Power cable, product guide, Driver and software DVD. A full-size I/O shield is not supplied with this motherboard.
Rear Panel Connectors: 19v DC Input Connector; 2x USB 3.0, DVI-I (up to 1920 x 1200 @ 60 Hz resolution); 1x eSATA 3Gb/s, HDMI connector (up to resolution 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz resolution); 1x Realtek Gigabit LAN; 1x Intel Gigabit LAN; 2x USB 2.0; Line out, Mic in.
DC Input: The H81T can be powered with a *regulated* 19v DC external power supply though the DC jack on the back panel board or internally via the 1x 2 Mini-Fit JR power connector. Not suitable for use connected directly to a battery.
Board connectors: Internal power connector (1x 2 pin); 2x DDR3 SODIMM sockets; 3x 9pin USB headers for 5x USB 2.0 ports; 1x SATA 6Gb/s data connector; 1x SATA 3Gb/s data connector; 1x SATA power connector; 1x mSATA Connector; 1x mSATA 6 Gb/s data connector; 1x serial port header; 1x TPM header; 1x front panel header; 1x front panel audio header; 1x digital microphone header (DMIC); 1x AIO stereo speaker header; 1x chassis intrusion connector; 1x Clear CMOS jumper.
Board Connectors (Expansion): PCI Express Half-Mini card slot; Full length mSATA Slot..
Board Connectors (Flat Panel): 1x Backlight inverter voltage selection header; 1x FPD brightness header; 1x Panel voltage selection header; 1x Panel off header; 1x LVDS connector(s).
Suitable Cases: The H81T can be used with any Mini-ITX case by bypassing the internal power supply but is most suited to chassis without a power supply (such as the M350) or for purpose-built customer chassis.
Suitable Processors: The H81T board supports Intel 4th Gen Core (Haswell) processors up to 84W TDP. The H81T is *not* provided with a processor or heatsink. Full processor compatibility list.
Heatsinks: A low profile heatsink may be required - check cases for compatibility. The default heatsink provided with a 35W TDP Intel CPU is low profile. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink and a 35W or 65W TDP CPU.
Typical M350 configuration: To use this board in the M350, To use this board in the M350, use our 160W 19V AC Adapter together with a 65W TDP CPU and Akasa 7106HP or K25 heatsink or 35W TDP CPU and supplied heatsink, plus 1 or 2 sticks of DDR3 RAM and a 2.5in HDD/SSD (add an M350 HDD tray to use 2x HDD/SSDs).
M350/M5X Compatibility: The H81T will work with the M350 (if the Extended Power/LED Cables are used) or with the M5X (picoPSU-90, 60W or 80W AC Adapter recommended), or the M5XP (version of M5X with included power supply).
Downloads: BIOS, Documentation and Drivers.
Suitable Memory: The H81T supports up to 16GB DDR3 1333/1066 on 2x SODIMMs. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here or in the 'you may also require' section to the left.