Jetway JNF94-270 Fanless Atom motherboard. Fanless 1.6GHz Intel Atom N270 processor and integrated Intel GMA 950 Video. Intel 945GSE + ICH7M Chipset. Up to 2GB of DDR2 system memory on one SODIMM. Realtek RTL8111C Gigabit Ethernet and High Definition Realtek ALC662 Audio.

Long Life: Provisional EOL date December 2013.

Power Consumption: Approximately 14W idle, 22W maximum power consumption.

Rear Panel Connectors: PS2 keyboard, VGA, DVI-D, Gigabit Ethernet, 4x USB 2.0 Ports, 2x Serial COM Ports (12V/5V selectable), Parallel Port, Line in, Line out & Mic in connectors.

Board Connectors: 1x DDR2 SODIMM Socket, 1x 32-bit PCI, 2x SATA, 1x 40pin IDE, 1x RS232 COM port (COM3, 12V/5V selectable), 1x RS232/RS485/RS422 COM port (COM4, 12V/5V selectable), 1x 8bit GPIO, 1x 18bit dual channel LVDS, 2x Front Panel USB Header (for 4x USB 2.0 ports), 1x HDTV output, 2x DC Fan Headers, 1x CPU Smart Fan Header, Front Panel Header.

Case compatibility. Suitable cases: Most Mini-ITX cases including Jou Jye 528i, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with any picoPSU), C1-RACK, Travla C146,147,159 (with universal backplate), Thin Client, Travla C158 (CD supported), Travla C137 (CD supported), Compact Wall Mount Case (with HDD). Other cases supporting standard height heatsinks.

Box contents: Motherboard, 2x SATA cables, Product Manual, 3 way IDE cable, I/O Shield, Driver and Software CD, HDTV pin header cable.

Note: The JNC94 supports up to 2GB DDR2 memory on a DDR2 SODIMM. This is not compatible with DDR or standard DIMM memory. Fully tested DDR2 SODIMMs are available here.

Jetway JNC96-525 Atom motherboard with 12V DC Input. Integrated Fanless 45nm 1.83GHz Intel Atom D525 processor with integrated Intel GMA 3150 Video. Intel NM10 Express Platform Controller Host (PCH) Chipset. Up to 4GB of DDR2 system memory; Realtek 8111DL 1000Base-T Gigabit Ethernet and High Definition Audio. Realtek ALC662 audio subsystem.

Box contents: Motherboard, 2x SATA cables, Product Manual, Molex to 2x SATA power cable, 44pin to 44pin IDE cable, I/O Shield, Driver and Software DVD. 12V AC Adapter not included - these can be found here.

Rear Panel Connectors: PS2 mouse and keyboard, VGA, 4 x USB ports, 1000 Base-T Ethernet, RS-232, 12 Volts DC in, Parallel Port, Line in, Line out & Mic in connectors.

Board Connectors: 4x SATA, 1x 44pin IDE, 1x Mini PCI Express, 1x PCI, 1x RS232/RS485/RS422, 2x Chassis Fan Headers, Front Panel Header, 3x Front Panel USB Header, Front Panel Audio header. 2x DDR2 DIMM Socket, 1x LVDS header, 1x Inverter header, 1x GPIO.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The Jetway JNC96-525 requires a 12V AC Adapter to power the board directly and feeds power to up to 2 other SATA devices through an on-board male Molex connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 2x HDDs or Slimline Optical Drives*, but we *do not* recommend powering a full size optical drive.

Powering devices: A cable with female Molex to 2x SATA power connectors is provided, suitable for powering up to 2x SATA 2.5in or 3.5in HDD/SSD. Other devices (including PATA/SATA slimline optical drives and CF cards) will require additional cables. Please use the cables linked on the left, or email before ordering. Don't forget you can install Vista from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are fully compatible with the JNC96-525: M350 (highly recommended), Nexus Psile.

Partially compatible cases (without PSU): M200, M300, M200-LCD, M300-LCD include 40pin IDE CF Adapters which cannot be used without an appropriate cable, as this board has a 44pin IDE port.

Suitable cases (with PSU): The following enclosures have a PSU which can be bypassed and are compatible with the JNC96-525: , Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05 and Jou Jue NU-528i, NAS Chassis (up to 2 drives)

Unsuitable/untested cases: Some cases are currently untested though they are likely to work if the PSU is bypassed, including Travla C158, Thin Client, Compact Wall Mount and all Cubid cases.

Note: The JNC96 supports 4GB DDR2 memory up to 2GB per DIMM. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

Jetway JNF77 motherboard with Integrated VIA Nano L2200 and VIA Chrome9 HC3 graphics supported DirectX 9. Onboard Realtek RTL8111C Gigabit Ethernet and VIA VT1708B 6 Channel Audio output. Can support up to 2GB of DDR2 533/667MHz Memory.

Long Life: Provisional EOL date December 2013.

Rear Panel Connectors: 1x PS/2 Keyboard, 1x PS/2 Mouse, 1x VGA, 1x COM Port, 1x Parallel Port, 4x USB 2.0 Ports, 1x 10/100/1000 Gigabit LAN, 3x Audio (Line-In, Mic-In, Stereo-Out).

Board connectors: 1x DDR2 533/667 DIMM Slot (up to 2GB), 2x SATA, 1x 40-Pin IDE, 1x PCI Slot, 1x CPU Fan Header, 2x System Fan Headers, 2x COM Headers, 1x LVDS Header, 1x LVDS Inverter, 1x DDR2 533/667Mhz Slot, 1x 20-Pin ATX Power Connector, 1x Front-Panel Header, 1x Front-Panel Audio Connector, 1x Wi-Fi Header, 1x CIR Infra-Red Header.

Suitable cases: The JNF76 has a standard sized heatsink - all Mini-ITX cases with a power supply will work.

Notes: The JNF76 uses DDR2 memory. This is not compatible with DDR memory. Fully tested DDR2 533 DIMMs are available here.

Jetway JNC84E-LF board supporting AMD Socket AM2/AM2+ with integrated ATI Radeon HD 4200 graphics with DirectX 10.1. The motherboard also fetures ALC662 HD Audio with 6 channel output. Up to 4GB of DDR2 800MHz RAM; RTL8111DL Gigabit LAN, 4x SATA; 2x eSATA; 10 USB ports (inc 4 internal). HyperTransport 3.0 support. ATI Unified Video Decoder 2.0 support (H.264/MPEG-4 AVC & VC-1).

Rear Panel Connectors: HDMI, VGA, DVI, 2x eSATA, 6x USB 2.0/1.1, 1x PS2 Keyboard/Mouse, 1x Gigabit LAN, 3x 3.5mm audio connectors.

Internal Connectors: 2x USB 2.0/1.1 headers (4x USB ports), CPU and Case Fan Connectors, 1x 20-Pin ATX Power Connector, 1x 12V ATX Power Connector, 1x COM, 4x SATA supporting RAID 0,1,5,10 via the AMD SB750 Chipset. 1x PCI Slot, 1x Mini PCI-Express x1 (on the underside of the motherboard). Front-Panel Audio Header, Front-Panel Header. 2x DDR2 SODIMM Sockets.

CPU and Heatsink *not* included. A fairly large heatsink is generally provided with AMD Retail Boxes. The JNC84E supports most AMD AM2/3 CPUs up to 95W TDP. Compatible CPUs include: AMD Athlon II X2 240, 245, 250, 240E, X4 600E; X4 605E; X4 610E; AM2+ Phenom Quad Core: 9100e; AM2 Athlon64 x2: 5400+, 5200+, 5000+, 4800+, 4600+, 4400+, 4200+; AM2 Athlon x2: BE2400, BE2350, BE2300; AM2 Athlon: 4850e, 4450e, 4050e: AM2 Sempron x2: 2300+, 2200+, 2100+; Athlon 64 (embedded): 3100+, 2600+, 2000+. For full BluRay 1080p playback the AM2+ Phenom, AM2 Athlon 64 x2, BE2400, 4450e, 4850e and 5050e only are recommended.

Compatible cases: Chenbro NAS Chassis, Nexus Psile, Venus 669, additionally Jou Jye (with low profile heatsink). Other cases may work but you will need at least a 120W power supply, and a low profile heatsink.

Note: The Jetway JNC84E uses DDR2 SODIMMs memory. Fully tested DDR2 SODIMMs are available here.

The Jetway JBC200C91-230-B Barebones system consists of the JC200 case and JNC91-230 motherboard with 1.6GHz Atom CPU, and comes pre-assembled. Just add drive(s) and a stick of DDR2 memory.

Configure a JBC200 Barebones system

Rear Panel Connectors: 12V Power Socket, 1x PS/2 Keyboard, 1x PS/2 Mouse, 1x Parallel, 1x COM Port, 1x VGA, 1x 10/100 Base-T LAN, 4x USB 2.0, 3x Audio (Line-in, Mic-in, Stereo-Out).

Board Connectors: 2x USB 2.0 Header (1 available), 1x COM Header.

Front Panel: 1x Power Button, 2x USB 2.0 Ports.

Drive Bays: 1x 2.5in HDD/SSD drive bay; Slimline Optical Drive or Second 2.5in HDD/SSD bay.

Measurements: 65(H) x 257(W) x 210(D) (2.56 x 10.12 x 8.27in). Volume: 3.51 litres.

Power Supply: 60W External AC Adapter with UK Plug; 100W Internal DC Converter with 20pin ATX connector, Floppy, 2x Molex power connectors.

Slimline Optical Drives: A Slimline IDE Adapter with Floppy power connector is provided for ATA (IDE) drives. A cable or adapter will be required for SATA drives.

Cooling: 2x 60x60mm Ball Bearing System fans.

Included Accessories: Stand, 1x Short SATA Cable, 1x Slim Optical Data/Power Cable, UK Power Cord, Driver CD, Manual, Screws for Hard Drive and Optical Drive.

Note: The JBC200 barebones supports up to 2GB DDR2 memory on a single DDR2 DIMM. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

Limited Stocks!

Special Edition Fanless 1.5GHz VIA C7-D (C7) powered 17x17cm Mini-ITX motherboard with CX700M chipset, 1x VIA VT6122 Gigabit LAN, 2x SATA II with RAID 0/1, 1x IDE, One DDR2 DIMM slot and 2x USB 2.0 Ports. RoHS compliant.

Configure a Jetway Board and Daughterboard Module

Jetway J7F5M Mini-ITX motherboards have a unique expansion module slot, to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports, Bootable Compact Flash and PC Card Slots are all available..

Specifications: 1.5GHz C7-D CPU; CX700M chipset; Supports up to 1GB on 240-pin DDR2 400/533 DIMM socket; 6 channel VIA VT1708A 6 channel audio; Integrated Unichrome Pro II graphics with MPEG-2 decoder acceleration (supports up to 128MB Shared Memory).

Rear Panel Connectors: PS2 Mouse & Keyboard; VGA; DVI-D; 2x USB 2.0; 1x Gigabit LAN; 1x Firewire; 3x 3.5mm Audio (Line-out, Line-in and Mic-in, can be configured as 5.1 outputs).

Board connectors: 1x IDE 66/100/133; 2x SATA with RAID 0/1; 20/24 pin ATX power; 1x DDR2 DIMM socket; 2x 9-pin Serial connector; 4x additional USB 2.0 connectors on 2x headers; CD/AUX Audio In and SPK out; F_PANEL; 1x HDTV Out connector; 1x IrDA (SIR); 1x 6-pin Video Input Connector; 1x PCI 120-pin adapter for daughterboard expansion modules; 1x 32-bit PCI slot.

Suitable cases: All our cases apart from Travla C134, C156. Compatible backplate not available for rack cases, though the board does fit. See our case compatibility chart for more information.

Notes: The J7F5M uses DDR2 memory. This is not compatible with DDR memory. Fully tested DDR2 533 DIMMs are available here.

Limited Stocks!

Special Edition Fanless 1.5GHz VIA C7-D (C7) powered 17x17cm Mini-ITX motherboard with CX700M chipset, 1x VIA VT6122 Gigabit LAN, 2x SATA II with RAID 0/1, 1x IDE, One DDR2 DIMM slot and 2x USB 2.0 Ports. RoHS compliant.

Configure a Jetway Board and Daughterboard Module

Jetway J7F5M Mini-ITX motherboards have a unique expansion module slot, to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports, Bootable Compact Flash and PC Card Slots are all available..

Specifications: 1.5GHz C7-D CPU; CX700M chipset; Supports up to 1GB on 240-pin DDR2 400/533 DIMM socket; 6 channel VIA VT1708A 6 channel audio; Integrated Unichrome Pro II graphics with MPEG-2 decoder acceleration (supports up to 128MB Shared Memory).

Rear Panel Connectors: PS2 Mouse & Keyboard; VGA; HDMI; 2x USB 2.0; 1x Gigabit LAN; 1x Firewire; 3x 3.5mm Audio (Line-out, Line-in and Mic-in, can be configured as 5.1 outputs).

Board connectors: 1x IDE 66/100/133; 2x SATA with RAID 0/1; 20/24 pin ATX power; 1x DDR2 DIMM socket; 2x 9-pin Serial connector; 4x additional USB 2.0 connectors on 2x headers; CD/AUX Audio In and SPK out; F_PANEL; 1x HDTV Out connector; 1x IrDA (SIR); 1x 6-pin Video Input Connector; 1x PCI 120-pin adapter for daughterboard expansion modules; 1x 32-bit PCI slot.

Suitable cases: All our cases apart from Travla C134, C156. Compatible backplate not available for rack cases, though the board does fit. See our case compatibility chart for more information.

Notes: The J7F5M uses DDR2 memory. This is not compatible with DDR memory. Fully tested DDR2 533 DIMMs are available here.

Jetway JNF76 1.6GHz VIA Eden C7-ULV powered Mini-ITX motherboard with Fanless operation, VIA VX800 Chipset and Integrated VIA Chrome9 HC3 graphics. 1x Realtek RTL8111C 10/100/1000 Base-T Gigabit LAN, 2x SATA II with RAID 0/1, 1x IDE with support for up to 2GB of DDR2 667Mhz memory.

Long Life: Provisional EOL date December 2013.

Configure a Jetway Board and Daughterboard Module

Jetway JNF76 Mini-ITX motherboards have a unique expansion module slot, to add additional ports and functionality - up to 3x Gigabit LAN, 4x Serial Ports, Bootable Compact Flash and PC Card Slots are all available.

Rear Panel Connectors: 1x PS/2 Keyboard, 1x PS/2 Mouse, 1x 10/100/1000 Gigabit LAN, 1x VGA Port, 1x COM Port, 3x Audio Output (Line-in, Mic-In, Stereo-Out), 2x USB 2.0 Ports.

Board connectors: 2x SATA, 1x PCI, 2x USB 2.0 Headers (supports up to 4 Ports), 1x CPU Fan Header, 2x System Fan Header, 1x 40-Pin IDE, 3x COM Port headers (Port 2 supports RS422/RS485), 1x CIR Infra-Red Header, 1x HDMI S/PDIF Header, 1x LVDS Header, 1x 20-Pin ATX Power Connector, 1x Front-Panel Header, 1x Front-Panel Audio Connector, 1x DDR2 667Mhz Slot.

Suitable cases: The JNF76 has a standard sized heatsink - all Mini-ITX cases with a power supply will work.

Notes: The JNF76 uses DDR2 memory. This is not compatible with DDR memory. Fully tested DDR2 533 DIMMs are available here.

Jetway JNC92 Mini-ITX board with brand new low power consumption 45nm Dual Core Intel Atom 330 processor running at included. Intel 82945G (ICH7) chipset and GMA 950 graphics. Up to 2GB of DDR2 533/667MHz RAM supported; Realtek High Definition Audio; Supports Jetway daughterboard modules.

Configure a Jetway J7F2/J7F5M/JNC92 Board and Daughterboard Module

Rear Panel Connectors: PS2 Mouse & Keyboard; Serial; VGA; 4x USB 2.0; 1x RTL8111C Gigabit LAN; 3x 3.5mm Audio (Line-out, Line-in and Mic-in).

Board connectors: 1x IDE 66/100/133; 2x SATA; 1x Floppy; 20 pin ATX power; 1x DDR2 DIMM socket; 2x additional USB 2.0 connectors on one 9 pin header; 2x Serial Port Headers; 1x Parallel Port Header; 1x PCI slot.

Case compatibility. Suitable cases: Most Mini-ITX cases including Jou Jye 528i, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with any picoPSU), C1-RACK, Travla C146,147,159 (with universal backplate), Thin Client, Travla C158 (CD supported), Travla C137 (CD supported), Compact Wall Mount Case (with HDD). Other cases supporting standard height heatsinks.

Dual Risers: Dual Riser Cards are designed to work with VIA chipset boards. The VIA branded Dual Riser Card *can* be configured to work with Atom boards. Other Dual Risers (including those in the 2755, 2799, C159 and other cases) only enable one slot, though they *may* be configurable in future.

Note: The JNC92 supports DDR2 memory up to 2GB. This is not compatible with DDR memory. Fully tested DDR2 DIMMs are available here.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds an additional 10/100 LAN Port.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds an additional 3 x 10/100 LAN Ports.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds an additional Gigabit LAN Port.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds an additional 3 x Gigabit LAN Ports.

Chipset: 3 x Realtek RTL8110SC.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds an additional 3 x Gigabit LAN Ports.

Chipset: 3 x Intel 82541PI Gigabit Ethernet.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds a Type I/II Compact Flash Reader and PC Card Adapter. A bootable Compact Flash Adapter is available below.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds 2 additional Serial Ports.

The module comes with a motherboard I/O shield with the correct cutouts.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds 2 additional Serial Ports and 2 additinal Serial Port pin headers with 2 serial ports on fly leads, which connect directly to those headers.

The module comes with a motherboard I/O shield with the correct cutouts (not shown in this picture.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds a Mini-PCI interface.

The adapter is connected using and IDE socket and powered with a standard floppy-sized Molex power connector.

The module comes with a motherboard I/O shield with the correct cutouts (not shown in this picture.

This motherboard module for the Jetway J7F2 and J7F5M and JNC92 motherboards adds 4x additional SATA 3Gb/s ports.

The Marvell 88SE6145 chipset supports RAID 0, 1, 0+1 and 5 across its 4 SATA ports.

The 2 SATA ports on the motherboards can still be used separately, giving 6 available in total. A replacement I/O shield is not required, as the 4 additional SATA ports are internal.

Drivers are available here