Thin-ITX Motherboards

Motherboards with onboard CPU
ODM (Intel) DN2800MTE Fanless Atom Thin-ITX Board with DC In
Jetway JNF9C-2600 Long Life Thin-ITX Board with 12V DC In
Jetway JNF9C-2800 Long Life Thin-ITX Board with 12V DC In
Jetway JNF9KC-1047 Thin-ITX Board with 9-24V DC In
Jetway JNF9M-2930 Long Life Thin-ITX Board with 9-36V DC In

Motherboards with Socket 1151
Gigabyte GA-H170TN 19V DC Socket 1151 Thin-ITX Board

DN2800MTE 1.86GHz Fanless Dual Core Atom Thin-ITX Board with VGA and HDMI and mSATA support

DN2800MTE Fanless Atom Thin-ITX Board
£125.00 
  £150.00 inc. VAT
  IN STOCK (Checked 16:10 BST)


More images of the DN2800MT

You may also require:

2GB DDR3 1333 SODIMM for DN2800MT
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

4GB DDR3 1333 SODIMM for DN2800MT (if using one SODIMM, use SODIMM slot 1)
£33.00 
  £39.60 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

60W AC Adapter for DN2800MT (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

80W AC Adapter for DN2800MT (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

More 12V AC Adapters


PCI Express x1 Riser Card and I/O Shield for DN2800MT and M350 Chassis
£12.50 
  £15.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

Add an mSATA drive:

 

DN2800MTE 'Cedar Trail' motherboard with extremely low "Thin-ITX" profile and passively-cooled dual core Intel Atom N2800 processor running at 1.86GHz and Intel NM10 Express chipset. Dual independent VGA and HDMI interfaces and internal LVDS connector; Up to 8GB of system memory (*see our note below regarding 64-bit video drivers); Intel 82574L Gigabit Ethernet Controller; 2+2 Channel Intel High Definition Audio (Realtek ALC888S audio codec); 8-channel (7.1) Intel High Definition Audio via the HDMI interface; PCI Express x1 and 2x Mini-PCI Express connectors.

Intel stopped producing motherboards under their own name in 2013. The same factory (ODM) continues to make these boards under licence from Intel. These boards are functionally and physically identical and with the same warranty, without the Intel logo.

OEM Unit complete with half-height and standard-height I/O shield; SATA cable, layout and back-panel stickers, product guide, Intel Express Installer driver and software DVD.

Rear Panel: 8-19V DC Input, 2x USB 2.0, Gigabit LAN, VGA, HDMI (both outputs support up to 1920 x 1200 at 60 Hz), 2x High-current/fast charging USB ports, 3.5mm Analog line out and Mic In connectors.

DC Input: The DN2800MTE can be powered with a *regulated* 8-19V DC external power supply though the DC jack on the back panel board or via the internal 1 x 2 power connector. Not suitable for use connected directly to a battery or variable voltage. Compatible Universal AC Adapters:

Board Connectors: Internal power connector (1 x 2 pin); 2x DDR3 SODIMM sockets; 2x 9pin USB headers for 4x USB 2.0 ports; 2x SATA 3Gb/s data connectors; 1x SATA power connector; Custom Solutions header; Debug connector; DMIC header; 1x Serial port header; Parallel port header; Front panel audio header; Internal stereo speakers connector; 1x S/PDIF output header; Front panel header; System fan header; Standby power LED; BIOS Setup configuration jumper block.

Board Connectors (Expansion): PCI Express Full/Half-Mini card slot (supports mSATA), PCI Express Half-Mini Card slot, PCI Express 1.0a x1 connector.

SATA ports: SATA port 1 is multiplexed with mSATA. Up to 2 devices can be fitted (2x HDD or 1x HDD and 1x mSATA).

Board Connectors (Flat Panel): Backlight inverter voltage selection header, Flat panel voltage selection header, FPD brightness connector, LVDS connector, 40pin eDP (Embedded DisplayPort) connector (on underside of board).

Intel GMA 3650 Graphics: 640 MHz core frequency; High quality texture engine: DX9.3 and OpenGL 3.0 compliant, Hardware Pixel Shader 4.1, Vertex Shader Model 4.1; Video: Blu-ray 2.0, H.264 & VC1 hardware decoder, PAVP 1.1c, HDCP1.3.

Multiple Graphics Outputs: The DN2800MTE can simultaneously support up to two of the three integrated graphics interfaces: VGA, HDMI, and Flat Panel Display. Flat Panel Display is supported by eDP and LVDS interfaces, however only one can be used at a time.

Suitable cases (without PSU): The following enclosures come without an internal PSU and are fully compatible with the DN2800MTE: M5X or the M350 (AC Adapter required).

*M350 & PCI Express x1 Support: The M350 Enclosure supports a PCI Express x1 card with this board. Choose the 'PCI Express x1 Riser Card and I/O Shield for DN2800MTE and M350 Chassis' option on the left.

Suitable cases (with PSU): Other enclosures with a PSU can be used if the internal PSU is bypassed altogether. If multiple drives are to be fitted then additional Molex or SATA splitter cables may be required. Please contact us if you have a specific requirement. You will require an external 12V AC Adapter.

Drivers: DN2800MTE product and driver pages.

*Support for 64-bit OS and 8GB Memory: This board operates in 64-bit mode and can address 8GB of memory. Intel's official support for this board is limited to 32-bit Windows (which can only address 3.5GB memory). No 64-bit video drivers are available, so 64-bit installations will have limited screen resolutions and no video acceleration. Screenshot of Linux operating in 64-bit mode here.

Memory Notes: The DN2800MTE supports up to 8GB DDR3 1333/1066 memory running at 1066MHz on 2x DDR3 SODIMMs. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF9C-2600 Long Life Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input and CFAST

Jetway JNF9C-2600 Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input
£115.00 
  £138.00 inc. VAT
Lead time usually 6-10 days


More images of the Jetway JNF9C-2600

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2600 (1 stick supported)
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

60W AC Adapter for JNF9C-2600 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

80W AC Adapter for JNF9C-2600 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.6GHz Intel Atom N2600 processor and integrated PowerVR SGX 545 (GMA 3600@400MHz) Graphics. Intel NM10 Chipset. Up to 2GB of DDR3 system memory on one SODIMM. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to Mid 2016, Provisionally to End 2016.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x SATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2600 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. There is an alternate 12V input on a 4pin Molex P4-type connector which can also be used (though not at the same time as the rear input).We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2600: M350 and M5X.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2600 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

Note: The JNF9C-2600 supports up to 2GB DDR3 memory on a DDR3 SODIMM. This is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF9C-2800 Long Life Fanless 1.86GHz Atom Thin-ITX Board with 12V DC Input, 4GB Support and CFAST

Jetway JNF9C-2800 Fanless 1.86GHz Atom Thin-ITX Board with 12V DC Input
Long Lead Time


More images of the Jetway JNF9C-2800

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2800 (2 sticks supported)
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

60W AC Adapter for JNF9C-2800 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

80W AC Adapter for JNF9C-2800 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.86GHz Intel Atom N2800 processor and integrated PowerVR SGX 545 (GMA 3650@640MHz) Graphics. Intel NM10 Chipset. Up to 4GB of DDR3 system memory on 2x 2GB SODIMMs. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to Mid 2016, Provisionally to End 2016.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x SATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2800 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. There is an alternate 12V input on a 4pin Molex P4-type connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2800: M350 and M5X.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2800 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

Note: The JNF9C-2800 supports up to 4GB DDR3 memory on 2x 2GB DDR3 SODIMMs (our pictures are of the JNC9C-2600, which has 1 slot). DDR3 is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF9KC-1047 Celeron 1047UE Thin-ITX Board with 9-24V DC Input, 16GB support and 4x Serial Ports

Jetway JNF9KC-1047 Celeron 1047UE Thin-ITX Board with 9-24V DC Input
  SPECIAL OFFER - usually £169.00
£89.00 
  £106.80 inc. VAT
  IN STOCK (Checked 16:10 BST)


More images of the Jetway JNF9KC-1047

You may also require:

2GB DDR3 1333 SODIMM for JNF9KC-1047 (2 sticks supported)
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

4GB DDR3 1333 SODIMM for JNF9KC-1047 (2 sticks supported)
£33.00 
  £39.60 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

8GB DDR3 1333 SODIMM for JNF9KC-1047 (2 sticks supported)
£55.00 
  £66.00 inc. VAT
  IN STOCK (Checked 16:10 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

60W AC Adapter for JNF9KC-1047 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

80W AC Adapter for JNF9KC-1047 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

More 12V AC Adapters

 

Intel Celeron 1047UE powered motherboard with ultra-low profile form factor (20mm high). Integrated Intel HD Graphics, Intel HM65 Express Chipset. Up to 16GB of DDR3 system memory on 2x 8GB SODIMMs. Realtek RTL8111F Gigabit Ethernet and High Definition Realtek ALC662 2 channel Audio. 1x COM port on Thin-ITX IO backplate with 3x additional COM ports available on full size IO backplate.

Rear Panel Connectors: 9-24V regulated DC Input, HDMI, RS232/422/485 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: mSATA Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 1x SATA 3Gb/s; 1x SATA 6Gb/s; 3x RS232 Serial headers (cables provided); 4x USB 2.0 headers on 2x 9pin connectors; 2x 24bit dual channel LVDS header/inverters; 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; 1x PS/2 Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9KC-1047 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. There is an alternate 12V input on a 4pin Molex P4-type connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9KC-1047: M350 and M5X.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9KC-1047 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

Note: The JNF9KC-1047 supports up to 16GB DDR3 memory on 2x 8GB DDR3 SODIMMs. DDR3 is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Jetway JNF9M-2930 Long Life Fanless 1.83GHz Quad Core Celeron Thin-ITX Board with 9-36V DC Input

Jetway JNF9M-2930 Fanless 1.83GHz Quad Core Celeron Thin-ITX Board with Wide DC Input
£139.00 
  £166.80 inc. VAT
  IN STOCK (Checked 16:10 BST)


More images of the JNF9M-2930

You may also require:

2GB DDR3L 1600 SODIMM for JNF9M-2930 (2 sticks supported)*
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 16:10 BST)

4GB DDR3L 1600 SODIMM for JNF9M-2930 (2 sticks supported)*
£33.00 
  £39.60 inc. VAT
  IN STOCK (Checked 16:10 BST)

60W AC Adapter for JNF9M-2930 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

80W AC Adapter for JNF9M-2930 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

More 12V AC Adapters

Add mSATA Drive:

 

Long-life board with ultra-low profile form factor (20mm high). Fanless 1.83GHz Intel Quad Core N2930 Bay Trail-M processor and integrated 313MHz - 854MHz Intel HD Graphics. Up to 8GB of system memory supported on 2x 4GB DDR3L SODIMMs. Realtek RTL8111G Gigabit Ethernet and High Definition Realtek ALC662 2.1 Channel HD Audio with 3W Speaker Amplifier. mSATA, PCI Express x1 and Mini PCI-E Slots.

Rear Panel Connectors: 9-36V regulated DC Input, 2x USB 3.0 Ports, DVI-I, RS232 Serial, Gigabit Ethernet, 2x USB 2.0 Ports, 1x 3.5mm Audio.

Board Connectors: 1x 2pin 9-36V alternate power connector (cannot be used at the same time as the external DC input); 1x 4pin Power out (male, cable provided); 2x DDR3L SODIMM Socket; 1x PCI-Express x1; 1x Full Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x Full mSATA (shared with 1x SATA port); 3x RS232 Serial headers (+5V/+12V); 2x USB 2.0 headers on 1x 9pin connectors; 2x USB 3.0 headers on USB 3.0 connector; 1x Parallel; 1x GPIO; 1x 24bit dual channel LVDS header/inverter; 3x Fan Headers; 1x 2pin LAN LED header; 1x 2pin S/PDIF header; 1x 4pin SMBUS header; Front Panel Header; 1x 9-pin Audio; 1x PS/2 Keyboard/Mouse header.

Important! This board has a 9-36V DC Power input and is not designed for use with a standard ATX PSU: The JNF9M-2930 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 2 other SATA devices through an on-board 4pin power output connector. There is an alternate 9-36V input on a 2pin Molex 5566-2 connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9M-2930: M350 and M5X.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9M-2930 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

*Note: The JNF9M supports up to 8GB DDR3L memory on 2x 4GB 1.35V DDR3L SODIMMs.This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory.

Gigabyte GA-H170TN DC Input Socket 1151 Thin-ITX Motherboard

Gigabyte GA-H170TN Socket 1151 Mini-ITX board
Long Lead Time


More images of the GA-H170TN

You may also require:


160W AC Adapter 19V for GA-H170TN
UK Power Cord

Contact us for Availability
Euro Power Cord
Contact us for Availability
US Power Cord
Contact us for Availability

£39.00 
  £46.80 inc. VAT


2GB DDR3L 1600 SODIMM for GA-H170TN
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 16:10 BST)

4GB DDR3L 1600 SODIMM for GA-H170TN
£33.00 
  £39.60 inc. VAT
  IN STOCK (Checked 16:10 BST)

8GB DDR3L 1600 SODIMM for GA-H170TN
£55.00 
  £66.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

Extended Power/LED Cables for M350 Chassis
£2.50 
  £3.00 inc. VAT
  IN STOCK (Checked 16:10 BST)

Add a Processor:

Full CPU list here*

Akasa 7106HP Low Profile Heatsink
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

Dynatron K2 1U Heatsink
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 16:10 BST)

Add an M.2 Drive:

 

Gigabyte GA-H170TN motherboard with Intel H170 chipset supporting Intel Socket 1151 processors.Extremely low "Thin-ITX" profile. Intel H170 Express chipset featuring DisplayPort, HDMI 2.0 and internal LVDS connector; Up to 16GB of system memory; 4x SATA 6Gb/s; 6x USB 3.0/2.0 (4 on the back panel), 5x USB 2.0/1.1 on headers; 1x Gigabit Ethernet; Realtek ALC887 High Definition Audio; 8-channel (7.1) Intel High Definition Audio via the HDMI interface; PCI Express x4, 1x M.2 Socket 1 connector for WiFi plus a dedicated M.2 Socket 3 slot for storage.

Retail Unit complete with Standard and Half-Height Thin Mini-ITX I/O shields; SATA Power cable, Product Guide, Driver and software DVD, Serial Cable, Screw kit for expansion cards.

Rear Panel Connectors: 19V DC Input Connector, Realtek Gigabit LAN, DisplayPort connector (up to 4096x2160 resolution @60 Hz), HDMI connector (up to 4096x2160 resolution @60 Hz), 4x USB 3.0, Line Out, Mic In.

DC Input: The GA-H170TN can be powered with a *regulated* 19V DC external power supply though the DC jack on the back panel board or internally via the 1x2 Mini-Fit JR power connector (Molex 5566-2). Not suitable for use connected directly to a battery.

Board connectors: Internal 19V Power Connector (1x 2 pin); 2x DDR3L SODIMM sockets; 3x 9pin USB headers for 5x USB 2.0 ports; 1x USB 3.0 header for 2x USB 3.0 ports; 4x SATA 6Gb/s data connectors; 1x SATA power connector; 1x M.2 Socket 3 Connector (Storage, type 2280); 1x Serial Port Header; 1x Front Panel Header; 1x Front Panel Audio Header; 1x Digital Microphone Header; 1x AIO Speaker Header; 1x Clear CMOS jumperl 1x NFC connector.

Board Connectors (Expansion): M.2 Socket 1 Wi-Fi card slot; PCI Express x4 add-in card connector (3.0 compatible, up to 25W).

Board connectors (LVDS): 1 x 40-pin LVDS connector (up to 1920x 1080 supported); 1 x flat panel display power header (both panel and backlight inverter); 1 x flat panel display power connector; 1 x LCD_VCC pin header; 1 x backlight switch header; 1x Flat panel display switch header

Suitable Cases: The GA-H170TN can be used with any Mini-ITX case by bypassing the internal power supply but is most suited to chassis without a power supply (such as the M350 or M5X) or for purpose-built customer chassis.

M.2 support: The GA-H170TN supports M.2 storage through a dedicated slot (black). Suitable M.2 drives are available in the 'you may also require' section.

Suitable Processors (*up to 65W): The GA-H170TN board supports Intel 6th Gen Core (Skylake) processors up to 65W TDP. The GA-H170TN is *not* provided with a processor or heatsink. Full processor compatibility list.

Heatsinks: A low profile heatsink may be required - check cases for compatibility. The default heatsink provided with a 35W TDP Intel CPU is low profile. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink and a 35W or 65W TDP CPU.

Typical M350 or M5X configuration: To use this board in the M350 or M5X, use our 160W 19V AC Adapter together with a 65W TDP CPU and Akasa 7106HP or K25 heatsink or 35W TDP CPU and supplied heatsink, plus 1 or 2 sticks of DDR3L RAM and a 2.5in HDD/SSD (add a HDD tray to use 2x HDD/SSDs in the M350).

Downloads: BIOS, Documentation and Drivers.

Suitable Memory: The GA-H170TN supports up to 16GB DDR3L on 2x SODIMMs (8GB max per DIMM). This is not compatible with DDR/DDR2 memory. Fully tested DDR3L DIMMs are available in the 'you may also require' section to the left.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.

Reckoner

Search tools:
Board Finder
Case Finder
Mini PC Finder

Cards accepted:
Secure Shopping: