Built from lightweight construction, the C294 chassis is wall-mountable and compatible with our optional VESA-mount kit. The chassis features great ventilation and is manufactured from aluminium alloy to further aid system cooling. The C294 chassis features an integrated 60W power supply suitable for Atom and Fusion boards. The simple, featureless front panel gives this chassis a rugged industrial look.

Bays: 1x 2.5in HDD/SSD bay.

Cooling: Integrated 40mm Internal Cooling fan.

Front Panel: No Controls or Indicators.

Rear Panel: 12V power Inlet, Power Button and Power Indicator LED.

Power supply: 110-240V Universal 60W AC Adapter and UK power cord. 80W Integrated DC-DC Converter.

Internal Power Connectors: 20-Pin ATX Power Connector, 12V P4 Connector, 1x SATA Power, 1x Molex, 1x Floppy Power.

Measurements (Body): 196.8mm (W) x 63.8mm (H) x 193.3mm (D) (7.75in x 2.51in x 7.61in). Volume: 2.43 litres

Measurements (Including Mounting): 228mm (W) x 63.8mm (H) x 193.3 mm (D) (8.98in x 2.51in x 7.61in). Volume: 2.81 litres

Supported boards: All Embedded Mini-ITX boards with ATX connectors, including those with taller height heatsinks e.g. early model Intel D945GCLF and Zotac ION-ITX-A/D/F and NM-10.

Full case comparison chart

The M350 Universal Mini-ITX Enclosure measures just 62 x 192 x 210mm (2.5 litres) and is capable of housing both embedded and socket Mini-ITX boards. Fanless operation possible using natural air convection through hundreds of tiny holes for CPUs with TDP < 10W; CPU Fan only operation possible for CPUs with TDP <= 65W.

Full Product Page

Provided without a power supply. Many plug in DC-DC PSUs and AC Adapters are available, or use with a motherboard with embedded DC PSU (e.g. Zotac ION-ITX-A)

Drive Bays: Up to 2x 2.5in HDD or SSD.

Many additional accessories available including:

• 2nd HDD drive plate
• Wall mounting bracket
• VESA mounting screws
• VESA/Wall mounting bracket
• DIN mounting kit
• Many power supply options

Measurements: 62(H) x 192(W) x 210(D) (2.7 x 7.6 x 8.3in)
Volume: 2.5 litres.

Supported boards: All Embedded Mini-ITX boards with ATX connectors or DC input, including those with taller height heatsinks e.g. early model Intel D945GCLF and Zotac ION-ITX-A/D/F and NM-10; Socket Mini-ITX boards with <30mm 1U heatsinks (with suitable heatsink and power supply, usually the pico-PSU-150-XT).

Full Product Page

Full case comparison chart

Now available in Silver!

All the same features as the original Black version, in a delightful Silver finish.

Full Product Page

Compact Wall Mountable case suitable for all non-socket Mini-ITX Boards - Universal 110-240V operation.

Constructed from lightweight aluminimum and measuring just 59 x 260 x 186mm (HxWxD).

This case is ideal for POS or Kiosk applications, or for any application where a discreet and securable case is required. Now includes mounting bracket for 2.5in HDD (SATA recommended). Or why not make a fanless solid state system and boot over a network, or from IDE Flash Module.

Power supply: 110-240V External Universal 60W AC Adapter and UK power cord; 62W Internal DC power board.

Power connectors: SATA Power; Molex Floppy; Molex HDD; 4pin 12V P4; 20pin ATX

Fans: 2x quiet internal 40mm cooling fans connected to a single fan header.

Supported boards: Embedded Mini-ITX boards with ATX connectors and standard height heatsinks e.g. Intel D2700DC, D2700MUD, D425KT, D525MW, D410PT, D510MO, later model D945GCLF, D945GCLF2; Jetway Atom & J7F2/4K/5M; Zotac ION; Fusion Boards; VIA EPIA Boards.

Full case comparison, size and board compatibility chart

Lockable Compact Wall Mountable case suitable for all non-socket Mini-ITX Boards - Universal 110-240V operation.

Constructed from lightweight aluminimum and measuring just 66 x 251 x 200mm (HxWxD).

This case is ideal for POS or Kiosk applications, or for any application where a discreet and securable case is required. Strong wire mesh venting on 4 sides provides maximum airflow. Internal mounting bracket for 2.5in HDD. Or why not make a fanless solid state system and boot over a network, or from IDE Flash Module.

Locking system: 200 x 250mm steel tray included with 18 separate Wall/VESA mounting points and 6 notches to 'hang' the case in place. 2 provided keys operate a bolt which secures the case firmly to the tray. The top of the case is screwed in place at the top, bottom and sides. The case must be unlocked from its tray and 11 screws unscrewed to remove the contents.

Rear Panel: DC Input, Key Lock, I/O Shield Slot; Green Power LED; Recessed Power and Reset Buttons (operated by a paper clip). Front, Top and Side Panels: Strong Mesh Venting.

Power supply included: 110-240V External Universal 60W AC Adapter and UK power cord; 62W Internal DC power board.

Power connectors: SATA Power; Molex Floppy; Molex HDD; 4pin 12V P4; 20pin ATX.

Supported boards: All Embedded Mini-ITX boards with ATX connectors, including those with taller height heatsinks e.g. early model Intel D945GCLF and Zotac ION-ITX-A/D/F and NM-10.

Full case comparison, size and board compatibility chart

Stylish cold rolled steel Mini-ITX enclosure with extruded aluminum alloy front panel.

Drive Bays: 1x 3.5in Hard Drive (can also accomodate 1x 2.5in drive); 1x side-mounting Slimline Optical Drive (slimline adapter or cable required); 1x PCI (PCI riser card provided); 1x Slot to fit a compatible Bootable Compact Flash Adapter

Front Panel: Power switch; Disk & HDD LEDs; 2x USB 2.0; 3x Audio.

Power supply: External 80W Universal 110/240V 12V AC adapter and internal 12V DC converter. Internal power connectors for 1x 20/24pin ATX Power, 1x 4pin 12V P4, 1x SATA, 1x Molex, 1x Floppy.

Accessories: 2x L-mounting floor/wall brackets and 1x PCI Riser Card included.

Measurements: 54(H) x 305(W) x 279(D) (2.1 x 12 x 11in)
Volume: 4.60 litres.

Supported Boards: Embedded Mini-ITX boards with ATX connectors and standard height heatsinks e.g. Intel D2700DC, D2700MUD, D425KT, D525MW, D410PT, D510MO, later model D945GCLF, D945GCLF2; Jetway Atom & J7F2/4K/5M; Zotac ION; Fusion Boards; VIA EPIA Boards. Boards with 12V P4 connectors will require an adapter cable (e.g. D945GCLF2). Power supply is not appropriate for socket boards.

Slimline Optical Drive Compatibility: Slimline drives fit on a removable plate that sits partially over the rear of the motherboard. Boards with tall heatsinks at the rear or with standard height RAM positioned vertically (including SODIMMs) will meet this plate preventing slimline drive compatibility. Boards that are not compatible because of heatsink position include: Intel D410PT, D510MO, Zotac ION-ITX-A/D/F and NM-10 boards. Boards with RAM at the rear of the board can often be used with ULP (Ultra Low Profile) RAM.

*PCI Express x16 Riser Cable option: Heavy duty cable replaces the cable on the provided PCI riser cable to give PCI Express x16 support.

Additional notes: PCI Riser card conflicts mechanically with LED connectors on JNF96FL-510 board.

Other Versions: 60W, 90W and 120W versions also available only for quantity orders.

Price increase: Sadly due to increased material and labour costs and the decline of the USDTWD, Travla have had to increase their prices by approx 28%. We have reflected this in our price on this item from 12th September 2011.

Full case comparison chart