Suitable for many Mini-ITX motherboards - Universal 110-240V operation, Just 377mm (14.85in) deep.
Available as part of our
Our own Mini-ITX compatible 1U case is constructed from Heavy-duty pre-plated SPGC cold-rolled steel. It supports up to 2x 3.5in hard drives (2.5in drives can be mounted in the 3.5in bays with the optional rail kit), and one slimline optical drive bay (IDE adapter provided for a slimline optical drive, SATA drives will require a Mini-SATA cable).
Version 2 updates the power supply to 80+ Bronze specification, reducing noise and increasing efficiency.
Measurements: 482.6 x 377.2 x 43.6mm (19in x 14.85in x 1.75in)
Front Panel: Power Switch and Embedded Reset Switch; 2x LAN LEDs, 1x HDD LED, 1x Power LED.
Cooling: One 97mm blower fan provides cooling (does not need to be connected for low power consumption boards). If low noise operation is required please consider the C2-RACK.
PCI Support To use a PCI card (up to 25cm long), add a flexible PCI Riser cable or solid PCI Riser card to your shopping basket.
Power Supply: Internal Universal 250W Flex ATX power supply with 2x Molex, 2x SATA, 20+4pin ATX, 8pin 12V and Molex to Floppy Adapter. An 8pin to 4pin 12V P4 cable is included within the accessories pack.
Mounting: Due to the short length of the C1-RACK, you can mount directly using just the front ears. For added stability in a 600mm deep rack, use the fixed rear mounting brackets. For flexibility in a 600mm to 800mm deep rack, use the 20in sliding rails. Please use the links on the left to purchase. Cage nuts may be required (generally provided with your rack hardware).
Supported boards: Embedded Mini-ITX boards with ATX connectors and standard height heatsinks e.g. D2500HN, JNC9KDL, D425KT, D525MW, D410PT, D510MO, later model D945GCLF, D945GCLF2; Jetway Atom & J7F2/4K/5M; Zotac ION-ITX-B/C, Fusion Boards; VIA EPIA Boards; Socket Mini-ITX boards fitted with suitable <30mm 1U heatsink such as Dynatron K2.
Backplates: We now can supply our Universal Backplate design which will fit any motherboard, and requires cutting with metal snips. We also have designed custom backplates for a wide range of boards - check the dropdown list at the top of the page. Backplates are not required to mount motherboards securely but do reduce dust ingress and improve airflow. Backplates can be manufactured for any motherboard (10 unit minimum, 3-4 week lead time).
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.