Intel D525MW 'Pine Trail' motherboard with passively-cooled dual core Intel Atom D525 processor running at 1.8GHz and Intel NM10 Express chipset. Integrated Intel GMA 3150 Video; Up to 4GB of system memory; Realtek 8111E Gigabit Ethernet Controller; Multi-streaming 6 channel (5.1) Intel High Definition Audio (Realtek ALC662 audio codec); Mini-PCI Express connector.

Retail Unit complete with SATA cable, layout and back-panel stickers, product guide and Intel Express Installer driver and software DVD.

Rear Panel: PS2 mouse and keyboard, Serial, Parallel, VGA with maximum resolution of 2048 x 1536 at 75 Hz (QXGA), 4 x USB ports, Gigabit Ethernet, Line in, Line out & Mic in connectors.

Board Connectors: 2x DDR3 SODIMM Sockets; 2x SATA; 1x PCI Slot; 1x Mini-PCI Express connector; 1x Serial Port; 3x Front Panel USB Header; Chassis Fan Header; Front Panel Header; Front Panel Audio header. 24pin ATX Power connector (supports both 20pin and 24pin connectors) and 4pin 12V P4 connector (this must be connected).

Suitable cases: The D525MW has a standard sized heatsink - all Mini-ITX cases with a power supply will fit. The board does not have an IDE port, so IDE devices cannot be connected (e.g. the CF reader on M200, M200-LCD, M300, M300-LCD).

C1/C2-RACK compatibility: Backplates are available designed for use with the C1-RACK and C2-RACK.

*Power Supply Notes: If your power supply does not have a 4pin 12V P4 power connector, you can add this with our Short Molex HDD to 12V P4 Power Cable. Your power supply must have a spare Molex HDD connector and be capable of providing the necessary 12V voltage.

Recommended picoPSUs: picoPSU-90 and picoPSU-150-XT as these have 12V P4 connectors. Use the splitter cable bundle on the left if using other picoPSUs.

Drivers: Intel D525MW product and driver pages

Note: The D525MW supports up to 4GB DDR3 1333/1066/800 memory on 2x 2GB SODIMMs running at 1066/800MHz. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.