Gigabyte GA-H97N-WiFi 4th/5th Gen Socket 1150 Mini-ITX board with Dual LAN, 6x SATA and 802.11ac WiFi

Gigabyte GA-H97N-WiFi Socket 1150 Mini-ITX board
Long Lead Time


More images of the GA-H97N-WiFi

You may also require:

2GB DDR3 1333 DIMM for GA-H97N-WiFi
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 01:39 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

4GB DDR3 1333 DIMM for GA-H97N-WiFi
£33.00 
  £39.60 inc. VAT
  IN STOCK (Checked 01:39 BST)

4GB DDR3 1600 DIMM for GA-H97N-WiFi
£32.00 
  £38.40 inc. VAT
  IN STOCK (Checked 01:39 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

8GB DDR3 1333 DIMM for GA-H97N-WiFi
£55.00 
  £66.00 inc. VAT
  IN STOCK (Checked 01:39 BST)

8GB DDR3 1600 DIMM for GA-H97N-WiFi
£59.00 
  £70.80 inc. VAT
  IN STOCK (Checked 01:39 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

Add a Processor:

Full CPU list here

Akasa 7106HP Low Profile Heatsink (not 84W TDP CPUs)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 01:39 BST)

Dynatron K2 1U Heatsink
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 01:39 BST)

IBM PS/2 Keyboard/Mouse Y-Splitter Cable
£4.00 
  £4.80 inc. VAT
Lead time usually 1-3 days

 

Gigabyte GA-H97N-WiFi Mini-ITX board with Intel H97 Express chipset supporting Intel 4th Gen (Haswell) and future 5th Gen (Broadwell) Core LGA1150 processors only. Integrated Intel HD graphics and 8 channel Audio; 2x Gigabit LAN; 6x SATA with RAID 0, 1, 0+1, 5; PCI Express 3.0* x16; Up to 16GB of DDR3 RAM; 1x Half length Mini PCI Express slot; 1x DVI-I (up to 1920x1200 resolution) & 2x HDMI graphics outputs (supporting up to 4096x2160 resolution); S/PDIF; 6x USB 3.0 (inc 2 internal); 4x USB 2.0 (inc 2 internal); 802.11a/b/g/n/ac WiFi/Bluetooth 4.0, 3.0+HS, 2.1+EDR with Antennas. * PCI Express 3.0 support is dependent on PCI-Express device capability.

Rear Panel Connectors: 2x USB 2.0; 2x WiFi Antenna; PS2/Mouse Port; 4x USB 3.0 (coloured blue); 2x Gigabit LAN (1x Intel i217V chipset, 1x Atheros 8161B chipset); 2x HDMI; 1x DVI-I; 5x switchable 3.5mm audio connectors; S/PDIF optical digital audio out.

Board connectors: 24pin ATX Main power connector (20-pin power supplies will work); Processor core power connector (12V 4pin P4, must be connected); SATA connectors: 6x SATA 6Gb/s; 1x Front panel USB 2.0 header (for 2 ports); 1x Front Panel USB 3.0 header (19pin, for 2 ports); 1x Serial (COM) Port header; 2x 240-pin DDR3 DIMM Sockets; PCI Express 3.0 x16 bus add-in card connector; Half-Height Mini-PCI Express card slot (populated with WiFi card); S/PDIF out header; Front panel audio header; Front Panel Connector (Power/Reset Button, power/HDD status LED); Clear CMOS Jumper; System and Processor fan headers.

Onboard RAID: The GA-H97N-WiFi supports Intel Rapid Storage Technology which provides the following RAID levels via the Intel H97 Express Chipset: RAID 0 - data striping; RAID 1 - data mirroring; RAID 0+1 (or RAID 10) - data striping and mirroring; RAID 5 - distributed parity.

Suitable Processors: The GA-H97N-WiFi board supports 4th Gen (Haswell) and future 5th Gen (Broadwell) processors. The GA-H97N-WiFi is *not* provided with a processor. Suitable processors are available here or in the 'you may also require' section to the left.

Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the GA-Z87N-WiFi with a standard Intel Socket 1150 heatsink: The Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.

1U Case compatibility: To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink and a 35W or 65W TDP CPU.

Typical M350 configuration: To use this board in the M350, we recommend the 150W AC Adapter and picoPSU-150-XT or picoPSU-160-XT together with a 65W TDP CPU and Akasa 7106HP or K25 heatsink or 35W TDP CPU and supplied heatsink, plus 1 or 2 sticks of DDR3 RAM and a 2.5in HDD/SSD (add an M350 HDD tray to use 2x HDD/SSDs).

Multiple Screens: This board supports 2 independent screens. 3 outputs is possible if a DVI-I to VGA adapter is used for the 3rd output (i.e. 2x digital HDMI and 1x analogue VGA). 3x digital outputs is not possible due to chipset limitations.

Downloads: BIOS, Documentation and Drivers.

Package Contents: 2x SATA cables, 1x I/O back plate, 1x Driver and Software DVD, 1x Dual WiFi Antenna.

Suitable Memory: The GA-H97N-WiFi uses 1333/1600MHz DDR3 memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here or in the 'you may also require' section to the left.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.

Reckoner

Search tools:
Board Finder
Case Finder
Mini PC Finder

Cards accepted:
Secure Shopping: