More images of the H81T
You may also require:
Add a Processor:
Add mSATA Drive:
Asus H81T motherboard with extremely low "Thin-ITX" profile. Intel H81 chipset featuring DVI-I, HDMI 1.4a interfaces and internal LVDS connector; Supports up to 2 displays simultaneously; Up to 16GB of system memory; Realtek 8111G Gigabit Ethernet; Realtek ALC8870VD High Definition Audio; 8-channel (7.1) Intel High Definition Audio via the HDMI interface; eSATA; 1x Half-Size Mini-PCI Express connector plus a dedicated mSATA slot.
Retail Unit complete with both full and half-height Thin Mini-ITX I/O shields; SATA Power cable and 2x SATA data cables, product guide, Driver and software DVD.
Rear Panel Connectors: 19V DC Input Connector; 2x USB 3.1 Gen 1, DVI-I (up to 1920 x 1200 @ 60 Hz resolution); 1x eSATA 3Gb/s, HDMI connector (up to resolution 4096 x 2160 @ 24 Hz / 2560 x 1600 @ 60 Hz resolution); 1x Realtek Gigabit LAN; 1x Intel Gigabit LAN; 2x USB 2.0; Line out, Mic in.
DC Input: The H81T can be powered with a *regulated* 19v DC external power supply though the DC jack on the back panel board or internally via the 1x 2 Mini-Fit JR power connector. Not suitable for use connected directly to a battery.
Board connectors: Internal power connector (1x 2 pin); 2x DDR3 SODIMM sockets; 3x 9pin USB headers for 5x USB 2.0 ports; 1x SATA 6Gb/s data connector; 1x SATA 3Gb/s data connector; 1x SATA power connector; 1x mSATA Connector; 1x mSATA 6 Gb/s data connector; 1x serial port header; 1x TPM header; 1x front panel header; 1x front panel audio header; 1x digital microphone header (DMIC); 1x AIO stereo speaker header; 1x chassis intrusion connector; 1x Clear CMOS jumper.
Board Connectors (Expansion): PCI Express Half-Mini card slot; Full length mSATA Slot.
Board Connectors (Flat Panel): 1x Backlight inverter voltage selection header; 1x FPD brightness header; 1x Panel voltage selection header; 1x Panel off header; 1x LVDS connector(s).
Suitable Cases: The H81T can be used with any Mini-ITX case by bypassing the internal power supply but is most suited to chassis without a power supply (such as the M350) or for purpose-built customer chassis.
Suitable Processors: The H81T board supports Intel 4th Gen Core (Haswell) processors up to 84W TDP. The H81T is *not* provided with a processor or heatsink. Full processor compatibility list.
Heatsinks: A low profile heatsink may be required - check cases for compatibility. The default heatsink provided with a 35W TDP Intel CPU is low profile. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink and a 35W or 65W TDP CPU.
Typical M350 configuration: To use this board in the M350, To use this board in the M350, use our 120W 19V AC Adapter together with a 65W TDP CPU and Akasa 7106HP or K25 heatsink or 35W TDP CPU and supplied heatsink, plus 1 or 2 sticks of DDR3 RAM and a 2.5in HDD/SSD (add an M350 HDD tray to use 2x HDD/SSDs).
Downloads: BIOS, Documentation and Drivers.
Suitable Memory: The H81T supports up to 16GB DDR3 1333/1066 on 2x SODIMMs. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here or in the 'you may also require' section to the left.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.