More images of the Gigabyte J1900N-D3V
You may also require:
Excellent value Gigabyte J1900N-D3V motherboard with Passively Cooled Quad-Core 64-bit 2GHz Celeron J1900 Bay Trail 22nm processor with VT-x support and integrated Intel HD Graphics. Up to 8GB of system memory; 2x SATA 3Gb/s; PCI Slot and Half Mini PCI-Express Slots; 2x Realtek Gigabit Ethernet; Realtek ALC887 High Definition 7.1 Channel Audio. Full Windows 7/8/8.1 32/64-bit driver availability.
Rear Panel: Mouse PS/2 port; Keyboard PS/2 port; 2x RS232 Serial ports; 1x VGA (supporting up to 2560 x 1600) ; 1x DVI-D (supporting up to 1920 x 1200); 2x Gigabit Ethernet ports; 4x USB 3.0 ports; 3x 3.5mm audio connectors (Line In, Line Out, Mic In).
Board Connectors: 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 1x 12v P4 connector (needs to be connected); 2x SATA 3Gb/s ports; 2x USB 2.0 connectors on 1x 9pin header; 1x Parallel Port header; 32-bit PCI slot; Half Mini PCI-Express Slot; 2x DDR3 SODIMM sockets (up to 4GB per socket); 1x Debug card header; 1x System Fan Header; 1x Processor Fan Header; 1x Front Panel Connector; 1x S/PDIF Out header; 1x Clear CMOS jumper; 1x Chassis Intrusion header.
Unique Features: Support for @BIOS; Support for Xpress Install; Support for APP Center; Support for ON/OFF Charge.
UEFI BIOS: This board uses a UEFI BIOS. To enter the BIOS press Delete on your keyboard during startup. If you enter the EFI shell (commmand prompt) type "exit".
Installing Windows 7: No changes to the BIOS are required to install Windows 7. We recommend updating the BIOS to at least version F3 using a DOS USB stick if running an earlier version BIOS. Please email us for easy instructions.
Case compatibility: The J1900N-D3V has a standard height heatsink and low power requirements. A 20pin or 24pin ATX connector can be used but the 12V P4 connector must also be connected. Check individual case descriptions and add the Molex to P4 Power Cable option where necessary. All our Mini-ITX cases will fit the board including but not exclusively Jou Jye 528i/568i/526i, CFI Chassis, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with a picoPSU fitted with a 12V P4 output), Travla C146, T1200, C159, Thin Clients, Travla C158 (inc CD drive), Compact and Lockable Wall Mount Cases.
M350/M5X Compatibility: The J1900N-D3V will work with the M350 (if the Extended Power/LED Cables are used) or with the M5X (picoPSU-90, 60W or 80W AC Adapter recommended), or the M5XP (version of M5X with included power supply).
Box contents: Motherboard, 2x SATA cables, Product Guide, I/O Shield.
Memory: The J1900N-D3V supports up to 8GB DDR3 memory on 2x DDR3 DIMMS. This is not compatible with DDR2 memory. Fully tested DDR3 DIMMs are available here.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.