More images of the Jetway JNC9I-525
You may also require:
Jetway JNC9I-525 Atom motherboard with 12V DC Input. Jetway JNC96-525 Atom motherboard with 12V DC Input. Fanless 45nm 1.83GHz Intel Atom D525 processor with integrated Intel GMA 3150 Video. Intel NM10 Express Platform Controller Host (PCH) Chipset. Up to 4GB of DDR3 system memory; Realtek RTL8111EVL 1000Base-T Gigabit Ethernet and High Definition Audio. Realtek ALC662 audio subsystem.
Long Life: Product availability forecasted at least to Mid 2014
Rear Panel Connectors: PS2 mouse and keyboard, VGA, 4 x USB ports, 1000 Base-T Ethernet, RS-232, 12 Volts DC in, Parallel Port, Line in, Line out & Mic in connectors.
Board Connectors: 2x SATA, 1x Mini-PCI Express, 1x PCI, 1x RS232/RS485/ RS422, 4x RS232, 2x Chassis Fan Headers, 1x CPU Fan Header, Front Panel Header, 2x USB Header for up to 3x USB 2.0 Ports, Front Panel Audio header. 2x DDR3 SODIMM Socket, 1x 24-Bit Single Channel LVDS header, 1x Inverter header, 1x GPIO, 1x 4-Pin Molex Power Output Connector, 1x 4-pin 12V Power Input Connector.
Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The Jetway JNC9I-525 requires a 12V AC Adapter to power the board directly and feeds power to up to 2 other SATA devices through an on-board male Molex connector. We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 2x HDDs or Slimline Optical Drives*, but we *do not* recommend powering a full size optical drive.
Powering devices: A cable with female Molex to 2x SATA power connectors is provided, suitable for powering up to 2x SATA 2.5in or 3.5in HDD/SSD. Other devices (including PATA/SATA slimline optical drives and CF cards) will require additional cables. Please use the cables linked on the left, or email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!
Suitable cases (with PSU): The PSU on most cases can be bypassed to make them compatible with the JNC9I-525 inlcuding Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05 and Jou Jue NU-528i, NAS Chassis (up to 2 drives)
Cooling: This board will get quite warm under load and is provided with an optional 40mm fan. Successful motherboard and case cooling is a combination of external environment, internal airflow, heatsink size, chassis design and workload. We recommend always connecting any existing case fans, and suggest adding the optional fan if using a fanless case with this board (such as the M350 or Thin Client cases).
Unsuitable/untested cases: Some cases are currently untested though they are likely to work if the PSU is bypassed, including Travla C158, Thin Client, Compact Wall Mount and all Cubid cases.
Box contents: Motherboard, 2x SATA cables, Product Manual, Molex to 2x SATA + Floppy power cable, I/O Shield, 3x Serial Port PCI Brackets, 1x 40mm Fan, Driver and Software DVD. 12V AC Adapter not included - these can be found here.
Note: The JNC9I-525 uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.