More images of the Jetway JNC9T-1037
You may also require:
Add mSATA Drive:
Jetway JNC9T-1037 motherboard with highly efficient Dual Core Ivy Bridge 1.8GHz ULV Celeron 1037U with VT-x support and integrated Intel HD Graphics. Up to 8GB of system memory; Wide variety of ports and connectors: Dual Realtek RTL8111G Gigabit LAN; 1x SATA 6Gb/s; 1x SATA 3Gb/s; 1x Mini PCI-E or mSATA Slot; Half Mini PCI-Express; PCI Express x1 Slot; RJ11 Jack with +12V/+24V Power for Cash Drawers; 5x Serial Port Headers & 1x Back Panel Serial Port; Realtek ALC662 2.1 Channel HD Audio. Full Windows XP/Vista/7/8 32/64-bit driver availability.
Long Life: Product availability forecasted at least to End 2015, provisionally to End 2016.
Rear Panel: 12V DC Power Input; 1x VGA Port; 1x RJ11 Jack with +12V/+24V Power for Cash Drawers; 1x PS2 Keyboard or Mouse Port; 1x Parallel Port; 1x HDMI Port; 1x RS232/422/485 Serial Port; 2x Gigabit LAN; 4x USB 2.0; 2x 3.5mm audio connectors (Line In, Line Out).
Board Connectors: 2-pin +12V Alternate Power connector; 1x SATA 6Gb/s; 1x SATA 3Gb/s; 1x Mini PCI-E or mSATA Slot; Half Mini PCI-Express; PCI Express x1 Slot.
Board Headers: 1x 9pin header for 2 additional USB 2.0 ports; 5x Serial Port Headers (RS232, +5V/+12V); 24-bits Dual Channel LVDS connector/Inverter; Chassis Intrusion Header; 1x 9pin Audio header; 1x Front Panel header; 3x Fan headers..
Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The Jetway JNC9T-1037 requires a 12V AC Adapter or 12V connected to the internal 1x2 power connector. The board then feeds power to up to 2 other SATA devices (cable provided). We sell several enclosures without internal power supplies, or you can bypass the PSU on any other Mini-ITX case. 80W is enough to power 2x HDDs or Slimline Optical Drives*, but we *do not* recommend powering a full size optical drive.
Powering devices: A cable with Molex Floppy to 2x SATA power connectors is provided, suitable for powering up to 2x SATA 2.5in or 3.5in HDD/SSD. Other devices will require additional cables. Don't forget you can install Linux and Windows 7 from a USB key very easily!
Box contents: Motherboard, SATA cable, Y Power Cable (Molex Floppy to 2x SATA); 30cm Serial Port to Header Cable; Driver CD; I/O Shield.
Memory: The JNC9T-1037 supports up to 8GB DDR3 memory on 1x DDR3 SODIMM. This is not compatible with DDR2 memory. Fully tested DDR3 DIMMs are available here.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.