Jetway JNF9C-2600 Long Life Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input and CFAST

Jetway JNF9C-2600 Fanless 1.6GHz Atom Thin-ITX Board with 12V DC Input
Long Lead Time


More images of the Jetway JNF9C-2600

You may also require:

2GB DDR3 1333 SODIMM for JNF9C-2600 (1 stick supported)
£22.00 
  £26.40 inc. VAT
  IN STOCK (Checked 15:41 BST)
USUALLY DESPATCHED NEXT BUSINESS DAY

60W AC Adapter for JNF9C-2600 (UK plug)
£19.00 
  £22.80 inc. VAT
  IN STOCK (Checked 15:41 BST)

80W AC Adapter for JNF9C-2600 (UK plug)
£25.00 
  £30.00 inc. VAT
  IN STOCK (Checked 15:41 BST)

More 12V AC Adapters

 

Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.6GHz Intel Atom N2600 processor and integrated PowerVR SGX 545 (GMA 3600@400MHz) Graphics. Intel NM10 Chipset. Up to 2GB of DDR3 system memory on one SODIMM. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.

Long Life: Product availability forecasted at least to Mid 2016, Provisionally to End 2016.

Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.

Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x SATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.

Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2600 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. There is an alternate 12V input on a 4pin Molex P4-type connector which can also be used (though not at the same time as the rear input).We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.

Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!

Suitable cases (without PSU): The following enclosures come without an internal PSU and are compatible with the JNF9C-2600: M350 and M5X.

Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2600 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).

Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.

Note: The JNF9C-2600 supports up to 2GB DDR3 memory on a DDR3 SODIMM. This is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.

Reckoner

Search tools:
Board Finder
Case Finder
Mini PC Finder

Cards accepted:
Secure Shopping: