More images of the Jetway JNF9C-2800
You may also require:
Long-life board with 5 year availability and ultra-low profile form factor (20mm high). Fanless 1.86GHz Intel Atom N2800 processor and integrated PowerVR SGX 545 (GMA 3650@640MHz) Graphics. Intel NM10 Chipset. Up to 4GB of DDR3 system memory on 2x 2GB SODIMMs. Realtek RTL8111EVL Gigabit Ethernet and High Definition Realtek ALC662 Audio. CFast Embedded Storage Socket onboard.
Long Life: Product availability forecasted at least to Mid 2016, Provisionally to End 2016.
Rear Panel Connectors: 12V DC Input, HDMI, RS232 Serial, 3x USB 2.0 Ports, Gigabit Ethernet, 1x 3.5mm Audio.
Board Connectors: CFast Embedded Storage Socket; 4pin Power out (cable provided); 1x DDR3 SODIMM Socket; 1x 32-bit PCI; 1x Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x SATA 6Gb/s; 2x RS232 Serial header. 1x RS232/422/485 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel; 1x GPIO; 1x 32pin 24bit dual channel LVDS1 header/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200); 1x 32pin 18bit single channel LVDS2 header/inverter (PowerVR SGX 545 chipset); 1x VGA header; 3x Fan Headers; Front Panel Header; 9-pin Audio; Keyboard/Mouse header.
Important! This board has a DC Power input and is not designed for use with a standard ATX PSU: The JNF9C-2800 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 3 other SATA devices through an on-board 4pin power output connector. There is an alternate 12V input on a 4pin Molex P4-type connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.
Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!
Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9C-2800 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).
Box contents: Motherboard, SATA cables, Product Manual, Short depth Thin-ITX and Standard I/O Shields, Driver and Software CD, Serial Cable.
Note: The JNF9C-2800 supports up to 4GB DDR3 memory on 2x 2GB DDR3 SODIMMs (our pictures are of the JNC9C-2600, which has 1 slot). DDR3 is not compatible with DDR or standard DIMM memory. Fully tested DDR3 SODIMMs are available here.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.