More images of the JNF9N-2930
You may also require:
Add mSATA Drive:
Expandable Long-life board with both ATX and DC input power options. Fanless 1.83GHz Intel Quad Core N2930 Bay Trail-M processor and integrated 313MHz - 854MHz Intel HD Graphics. Up to 8GB of system memory supported on 2x 4GB DDR3L SODIMMs. Intel i211AT Gigabit Ethernet and High Definition Realtek ALC662 2.1 Channel HD Audio with 3W Speaker Amplifier. mSATA, PCI Express x1 and Mini PCI-E Slots. Daughterboard Expansion module can be added for additional LAN or Serial Ports.
Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; VGA; RS232 Serial; RJ45 Gigabit LAN; 3x USB 2.0; 12V DC Input; HDMI; 1x USB 3.0; 1x 3.5mm Audio.
Jetway Daughterboard modules: The JNF9N uses the "Gen2" PCI-E based modules. Please select these from the "You may also require" area on the left.
Board Connectors: 1x 2pin 9-36V alternate power connector (cannot be used at the same time as the external DC input or ATX input); 20-pin ATX power connector (do not use with DC connected), 1x 4pin Power out (male, cable provided); 2x DDR3L SODIMM Socket; 1x PCI-Express x1; 1x Full Mini PCI-Express (Full and Half Length, no adapter required); 1x Full mSATA (shared with 1x SATA port); 2x SATA 3Gb/s; 1x RS232 Serial header (+5V/+12V); 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel Port header; 1x 24bit dual channel LVDS header/inverter (CHRONTEL CH7511B); 1x GPIO header; 3x Fan Headers; 1x 2pin LAN LED header; 1x 2pin S/PDIF header; 1x 4pin SMBUS header; 1x Front Panel Header; 1x Chassis Intrusion Header; 1x 9-pin Audio; 1x 4-pin Speaker Power header.
Powering this board: This board can be powered in one of three ways - The DC Power input on the rear of the board accepts a regulated 12V input through a standard 2.5/5.5mm socket. The Molex 5566-2 connector on the board can also accept a regulated 12V input. The ATX connector accepts a standard 20pin ATX connector. Any of our cases will work with this board. If using an enclosure such as the M350 or M5X, use one of our 12V AC Adapters to power the board at the rear and feed power to up to 2 other SATA devices through an on-board power output connector (cable provided).
Box contents: Motherboard, SATA cables, RS232 Connector to Header Cable, Y Power Cable, Product Manual, I/O Shield, Driver and Software CD.
*Note: The JNF9N supports up to 8GB DDR3L memory on 2x 4GB 1.35V DDR3L SODIMMs.This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.