You may also require (see notes*)
Designed to provide power and to control the ON/OFF switch of a motherboard (PC) based on ignition status, M2-ATX-HV is a wide input (6-32V) vehicle or general purpose battery powered application DC-DC ATX power supply capable of surviving tough car engine cranks (down to 5.7V) as well as transient over-voltage situations.
8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown vehicle / car timing schemes. While in deep sleep mode, M2-ATX-HV constantly monitors your car battery voltage levels, automatically shutting down until battery levels reach safe levels.
M2-ATX-HV comes equipped with ATX, Molex HDD, SATA HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V or 24V car/boat/RV battery and power up your PC.
Designed to work with your own projects or the VoomPC and VoomPC 2, but is also a direct size compatible replacement with Morex 26xx, 27xx, 36xx, Travla C134, C150, C158, C159, Compact Wall Mount cases. Dimensions: 45mm x 160mm (1.77in x 6.31in). 160W Output - ideal for Socket Mini-ITX boards. Not compatible with EPIA PD boards.
*Notes: If your board has a 4 pin 12V P4 power connector, you will need add a Molex to 12V P4 Power Cable or 12V P4 to 12V P4 Power Cable.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.