M3-ATX-HV PicoPSU Form-Factor 95W Intelligent Very Wide Input 6V-34V Vehicle/Battery DC-DC Power Supply
M3-ATX-HV 95W | |
£78.00 inc. VAT | |
PRE ORDER
Lead time usually 3-5 days |
Designed to provide power and to control the ON/OFF switch of a motherboard (PC) based on ignition status, M3-ATX-HV is a very wide input (6-34V) vehicle or general purpose battery powered application DC-DC ATX power supply capable of surviving tough car engine cranks (down to 6V) as well as transient over-voltage situations.
The M3-ATX-HV is based on an electrically similar design to the M2-ATX but with dramatic size reductions (picoPSU plug-in style).
- 95 Watts (120watt peak) PSU
- 20pin ATX, 6-34V wide input range
- Programmable timing settings using optional serial harness and utility
- Intelligent shutdown controller
- ON/OFF motherboard control
- Survives vehicle engine cranks
- Battery deep discharge prevention
- "Anti-Thump" Amplifier remote control
- Low standby current
- Solid Japanese Polymer capacitors
M3-ATX-HV comes equipped with a ATX, Molex HDD, SATA HDD and Floppy cable harness, jumpers, faston connectors and cables for Thump and Motherboard ON/OFF switch. Just connect to your 12V or 24V car/boat/RV battery and power up your PC.
Programmable shutdown / sleep modes via optional serial cable; Fits any motherboard equipped with a 20 or 24pin ATX connector; 100% silent, fanless, no moving parts; Operates from 6-34V; Multi-chemistry batteries supported; Highly efficient design - does not produce a lot of heat; Ideal for low power Intel Core processors as well as all Atom, VIA or AMD processors.
Notes: If your board has a 4 pin 12V P4 power connector, you will need add a Molex to 12V P4 Power Cable. Use the optional AC/DC Barrel Connector Cable to power from one of our AC Adapters (useful for testing).
Using an AC Adapter: Add the Barrel connector cable to connect one of our 60W, 80W or 150W AC Adapters.
Specifications | ||
---|---|---|
Model | M3-ATX-HV 95W | |
Form Factor | ATX picoPSU | |
Power Supply | ||
Output Power | 95W | |
Peak Power | 120W | |
Input | ||
Input Voltage | 6-34V | |
Connectors | Battery & Ignition | 230mm |
Output | ||
Connectors | 20-pin ATX | |
ATA HDD Power | 175mm | |
SATA Power | 280mm | |
Floppy Power | 375mm | |
Cooling | ||
Operating Temperature | -40℃ - 65℃ | |
Storage Temperature | -55℃ - 125℃ | |
Type | Fanless | |
Dimensions | ||
W x L x H | 44 x 29 x 38 mm | |
Manufacturer's Warranty | ||
Duration | Standard 12 months | |
Features | ||
|