Rugged and compact, the VoomPC 2 is constructed from thick aluminium and steel with an attractive ABS front panel.
Front Panel: Power Indicator LED, 2x USB 2.0; 2x RCA/Cinch/Phono Audio out.
Power Supply: No power supply or power switch is included with the VoomPC 2. The chassis is designed primarily to work with an M2-ATX or M2-ATX-HV vehicle power supply. Will also work with M3-ATX or M3-ATX-HV. Standard picoPSU can be used if Internal Power Connector Cable and 8-pin Mini-Fit JR removed from case to allow DC connector egress. No power switch is fitted - set your Vehicle PSU to switch on engine ignition, or configure your board's BIOS to power up after AC Power Loss.
Cooling: 2x 40mm fans with 3-pin connectors are supplied with the chassis.
Measurements: 66(H) x 210(W) x 265(L) mm (2.6 x 8.27 x 10.4 inches) Volume: 3.67 Litres.
Box Contents: Voom PC2; Slimline Optical / 2.5in drive tray; Front panel pcb with fan splitter headers; ABS Front panel; External Power Connector cable (bare ends ready for crimping); Internal Power Connector cable (with female spade connectors to fit to Vehicle PSU); Front panel / Fan bracket; Wiring Pack: usb header cable, audio cable, fan header cable, power indicator cable.
Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.