|
The picoPSU-120-WI-25 plugs directly into a motherboard ATX connector and measures just 31x45x20mm - about the size of two AA batteries. The picoPSU-120-WI-25 generates up to 80 Watts of power (120 Watts peak) from a regulated 12-25V DC supply, at over 94% efficiency. An attached cable harness provides: - 20pin ATX Connector
- SATA Power Connector
- Molex (ATA) HDD Power
- Molex Floppy Power
Compatibility: The picoPSU-120-WI-25 can power all our Mini-ITX boards with Geode, C3, C7, Atom and Fusion processors. Additionally some lower power consumption Mini-ITX boards with Intel and AMD processors up to around 45W TDP can be powered. More powerful picoPSUs offer more headroom for additional devices. If you are considering using with a board not on our site, please email us to check compatibility.
Compatible AC Adapters:
*The 2.5/5.5mm Jack can be replaced with the more robust 4-pin Mini-DIN connector that is supplied with our 150W and 192W AC Adapters.
Adding more SATA drives: The picoPSU-120-WI-25 has one SATA connector and a Molex connector. To power more SATA drives use a Molex to SATA or 2x SATA cable.
P4 Power Connectors: If your board has a 4-pin 12V P4 power connector, you will need to use a Molex to 12V P4 Power Cable, or a different picoPSU.
Regulated Voltage Required: A stable and regulated voltage of between 12 and 25 Volts is required to use this picoPSU, connected by a standard 2.5mm /5.5mm DC Jack or Mini-Fit JR connector. Our 12V AC Adapters are suitable for this picoPSU. Please read their product listings to determine which is most suitable for you.
Long Life: The picoPSU-120-WI-25 is marked for long life production and is guaranteed to have a life cycle of 5 years or more.
Notes: Not suitable for use with batteries or unregulated power sources.
 Installation Guide
| 
