|
The picoPSU-80 plugs directly into a motherboard ATX connector and measures just 31x45x13mm - about the size of two AA batteries. The picoPSU-80 generates up to 80 Watts of power from a 12V DC supply connected by a 2.5mm/5.5mm Jack, at over 96% efficiency. An attached cable harness provides: - 20pin ATX Connector
- SATA Power Connector
- Molex (ATA) HDD Power
Compatibility: The picoPSU-80 can power all our Mini-ITX boards with Geode, C3, C7, Atom and Fusion processors. More powerful picoPSUs offer more headroom for additional devices. If you are considering using with a board not on our site, please email us to check compatibility.
12V AC Adapter Required: You will need a 12V AC Adapter to use this picoPSU. Please read their product listings to determine which is most suitable for you. Compatible Universal AC Adapters:
Adding more SATA drives: The picoPSU-80 has one SATA connector and a Molex connector. To power more SATA drives use a Molex to SATA or 2x SATA cable.
P4 Power Connectors: If your board has a 4-pin 12V P4 power connector, you will need to use the 12V P4 Extension Cable for picoPSU-80, or a Molex to 12V P4 Power Cable, or use the picoPSU-90.
Long Life: The picoPSU-80 is marked for long life production and is guaranteed to have a life cycle of 5 years or more. Notes: Not suitable for use with batteries, unstable power sources or voltages other than 12V.
 Installation Guide
| 
