|
The picoPSU-90-XLP plugs directly into a motherboard ATX connector and measures just 31x45x13mm - about the size of two AA batteries. The picoPSU-90-XLP generates up to 90 Watts of power from a 12V DC supply connected by a 2.5mm/5.5mm Jack, at over 95% combined efficiency. The picoPSU-90-XLP is the 'greenest' picoPSU to date:
- Ultra low power Standby consumption (<0.050 Watts!)
- High efficiency in the low (5-15 Watt) and high power ranges
- Easily meets EU low power regulation
An attached cable harness provides: - 20pin ATX Connector
- SATA Power Connector
- Molex (ATA) HDD Power
- 12V P4 Power
Compatibility: The picoPSU-90-XLP can power all our Mini-ITX boards with Geode, C3, C7, Atom and Fusion processors. More powerful picoPSUs offer more headroom for additional devices. If you are considering using with a board not on our site, please email us to check compatibility.
12V AC Adapter Required: You will need a 12V AC Adapter to use this picoPSU. Please read their product listings to determine which is most suitable for you. Compatible Universal AC Adapters:
Adding more SATA drives: The picoPSU-90-XLP has one SATA connector and a Molex connector. To power more SATA drives use a Molex to SATA or 2x SATA cable.
P4 Power Connectors: The picoPSU-90-XLP comes with a 4-pin P4 Connector on the cable harness so is ready to use with boards with P4 sockets such as the Asus E35M1-I Deluxe, Gigabyte GA-D525TUD, E350N-USB3, Intel D945GCLF, D945GCLF2, D425KT, D525MW, Sapphire Pure Fusion Mini E350 and several others (check board listings).
Long Life: The picoPSU-90-XLP is marked for long life production and is guaranteed to have a life cycle of 5
years or more.
Notes: Not suitable for use with batteries, unstable power sources or voltages other than 12V.
 Installation Guide
| 
