Dynatron A38 Cooler suitable for 2U Chassis with AMD Socket sWRX8, sTRX4, TR4 and SP3

Dynatron A38 Cooler with aluminium fins and heatpipes directly contacting CPU suitable for cooling AMD Socket sWRX8, sTRX4, TR4 and SP3 motherboards in a 2U Chassis.

Dynatron 6025 long life two-ball bearing axial PWM fan draws cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance Shin-Etsu 7762 thermal grease ensures clean and easy installation.

Case Compatibility: Side Blower design suitable for use in a 2U chassis. Tip: angle the A38 to force air out of the rear of the chassis.

Screw Fit: Screws surrounded by compression springs attach to standard motherboard socket plate.

Compatible Boards and CPUs: AMD Ryzen Threadripper Processor Socket sWRX8, sTRX4, TR4, and AMD Epyc Processor Socket SP3 Motherboards fitted with a processor producing up to 280W CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 2300 RPM (at 0-20% Duty Cycle); 5400 RPM (at 50%); 11000 RPM (at 100%); Airflow: 11.91 CFM (at 0-20%), 28.38 CFM (at 50%), 58.31 CFM (at 100%); Air Pressure: 1.48 mm-H2O (at 0-20%); 7.54 mm-H2O (at 50%); 28.8 mm-H2O (at 100%); Noise level: 25.8 dBA (at 0-20%), 44.4 dBA (at 50%), 59.8 dbA (at 100%); Power Consumption: 0.84 W (at 0-20%); 2.76 W (at 50%); 18 W (at 100%); Weight: 450g; Fan Dimensions: 60 x 60 x 25mm; Overall Dimensions: 119 x 79 x 65 (H) mm.