Dynatron A41 Cooler suitable for 2U Chassis with AMD sWRX8, sTRX4, TR4 & SP3

Dynatron A41 Cooler with Copper1100 heatsink with vapor chamber base suitable for cooling AMD Socket sWRX8, sTRX4, TR4 and SP3 motherboards in a 1U Chassis.

Dynatron long life two-ball bearing fan draws cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance thermal grease ensures clean and easy installation.

Case Compatibility: Side Blower design suitable for use in a 1U chassis. Tip: angle the A41 to force air out of the rear of the chassis.

Screw Fit: Screws surrounded by compression springs attach to standard motherboard socket plate.

Compatible Boards and CPUs: AMD Ryzen Threadripper Processor Socket sWRX8, sTRX4, TR4, and AMD Epyc Processor Socket SP3 Motherboards fitted with a processor producing up to 225W CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 2000 RPM (at 0-20% Duty Cycle); 4900 RPM (at 50%); 8600 RPM (at 100%); Airflow: 5.59 CFM (at 0-20%), 14.76 CFM (at 50%), 26.25 CFM (at 100%); Air Pressure: 3.69 mm-H2O (at 0-20%); 25.28 mm-H2O (at 50%); 89.8 mm-H2O (at 100%); Noise level: 23 dBA (at 0-20%), 43.5 dBA (at 50%), 62.2 dbA (at 100%); Power Consumption: 1.08 W (at 0-20%); 4.7 W (at 50%); 23.45 W (at 100%); Weight: 480g; Fan Dimensions: 92 x 92 x 25mm; Overall Dimensions: 120 x 82 x 28.6 (H) mm.