Dynatron B5 Cooler suitable for 2U Chassis with Intel Socket FCLGA 3647 Narrow ILM

Dynatron B5 Cooler with aluminum heatsink with embedded heatpipes suitable for cooling Intel Socket FCLGA 3647 Narrow ILM motherboards in a 2U Chassis.

Dynatron 6025 long life two-ball bearing axial fan draws cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance Shin-Etsu 7762 thermal grease ensures clean and easy installation.

Case Compatibility: Side blower design suitable for use in a 2U chassis. Tip: angle the B5 to force air out of the rear of the chassis.

Screw Fit: M4 Nuts surrounded by compression springs screw through Intel package carrier to motherboard.

Compatible Boards and CPUs: Intel Socket FCLGA 3647 Narrow ILM Motherboards fitted with a processor producing up to 205W CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 1600 RPM (at 0-20% Duty Cycle); 4000 RPM (at 50%); 8000 RPM (at 100%); Airflow: 9.28 CFM (at 0-20%), 23.21 CFM (at 50%), 46.41 CFM (at 100%); Air Pressure: 0.76 mm-H2O (at 0-20%); 4.76 mm-H2O (at 50%); 19.04 mm-H2O (at 100%); Noise level: 18 dBA (at 0-20%), 37.89 dBA (at 50%), 52.94 dbA (at 100%); Power Consumption: 1.2 W (at 0-20%); 2.28 W (at 50%); 7.2 W (at 100%); Weight: 470g; Fan Dimensions: 60 x 60 x 25mm; Overall Dimensions: 108 x 80 x 66 (H) mm.