Dynatron Q7 Side Blower Cooler with Vapour Chamber Base suitable for 1U Chassis with Intel Socket 1700 (Intel 12th, 13th Gen Core)

Dynatron Q7 Side Blower Cooler with with Copper1100 heatsink with vapor chamber base suitable for cooling Intel Socket LGA 1700 motherboards (12th and 13th Gen Core) in a 1U Chassis.

Long life two-ball bearing fan draws the cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance Shin-Etsu 7762 thermal grease ensures clean and easy installation.

Case Compatibility: Side Blower design suitable for use in a 1U chassis. Tip: angle the Q7 to force air out of the rear of the chassis.

Screw Fit: Screws surrounded by compression springs attach to the provided base plates fitted underneath the motherboard. Base plates fit on top of existing motherboard socket. It is not necessary to remove any components before fitting.

Compatible Boards and CPUs: Intel Socket 1700 Motherboards fitted with a processor producing up to 125W Base or 145W Turbo CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 2000 RPM (at 20% Duty Cycle); 4900 RPM (at 50%); 8700 RPM (at 100%); Airflow: 6.41 CFM (at 20% Duty Cycle), 15.26 CFM (at 50%), 26.25 CFM (at 100%); Air Pressure: 3.69 mm-H2O (at 20% Duty Cycle); 25.28 mm-H2O (at 50%); 89.80 mm-H2O (at 100%); Noise level: 23.3 dBA (at 20% Duty Cycle), 43.5 dBA (at 50%), 62.2 dbA (at 100%); Power Consumption: 1.08 W (at 20% Duty Cycle); 4.7 W (at 50%); 26.25 W (at 100%); Weight: 380g; Fan Dimensions: 80 x 80 x 13mm; Overall Dimensions: 95 x 94 x 28.2 (H) mm.