Dynatron R17 Cooler suitable for 3U Chassis with Intel Socket FCLGA 2011/2066 Square ILM

Dynatron R17 Cooler with aluminum fins and 4x heat pipes with H.C.C. technology suitable for cooling Intel Socket LGA 2011 & 2066 Square ILM motherboards in a 3U Chassis.

Dynatron DF129225BM-PWMG long life two-ball bearing fan draws cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance Shin-Etsu 7762 thermal grease ensures clean and easy installation.

Case Compatibility: Side blower design suitable for use in a 3U chassis. Tip: angle the R17 to force air out of the rear of the chassis.

Screw Fit: Screws surrounded by compression springs attach to the provided base plates fitted underneath the motherboard. Base plates fit on top of existing motherboard socket. It is not necessary to remove any components before fitting.

Compatible Boards and CPUs: Intel Socket LGA 2011 & 2066 Square ILM Motherboards fitted with a processor producing up to 165W CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 1000 RPM (at 0-20% Duty Cycle); 1800 RPM (at 50%); 2500 RPM (at 100%); Airflow: 17.34 CFM (at 0-20%), 31.21 CFM (at 50%), 43.36 CFM (at 100%); Air Pressure: 0.48 mm-H2O (at 0-20%); 1.55 mm-H2O (at 50%); 3 mm-H2O (at 100%); Noise level: 17 dBA (at 0-20%), 24.78 dBA (at 50%), 31.92 dbA (at 100%); Power Consumption: 0.96 W (at 0-20%); 1.44 W (at 50%); 3 W (at 100%); Weight: 530g; Fan Dimensions: 92 x 92 x 25mm; Overall Dimensions: 91 x 91 x 110 (H) mm.