More images of the CFI-A7879 4-Bay NAS Chassis
This solidly constructed steel chassis has 4 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. A further 2.5" bay is available internally. Full height PCI/PCI-Express cards are supported.
Bays: 4x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies; 1x Internal 2.5in drive bay (needs additional power cable).
Cooling: 1x 120mm Rear Fan (quiet).
Front Panel: 2x USB 2.0 Sockets; Power Button; Reset Button; Power and Storage Activity LEDs; Each Drive Caddy has Power and Activity Indicators.
Power supply: Internal 200 Watt AC Adapter with quiet 40mm Fan. UK power cord provided as standard. Power connectors: 1x 20/24pin ATX; 1x 12v P4; 2x Molex (to power the 4x drive bays).
Fitting 5 drives: To power a 2.5in drive (usually as a boot drive) use the provided Female Molex to Male Molex & SATA splitter cable inline with a power connector fitting to one of the SATA backplanes. These Molex connectors are tight - but can be removed with care (tip: remove the bottom 2 HDD trays and unscrew the backplane from the front, remove the backplane and gently wiggle till the connector releases).
Measurements: 200mm (W) x 250mm (H) x 298mm (D) (7.9in x 9.84in x 11.73in).
Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.