Jetway JNF9G-QM77 Socket G2 Expandable Mini-ITX Board with Dual LAN, Remote Management, 6x SATA and mSATA

Jetway JNF9G-QM77 Expandable Socket G Mini-ITX Board
  £190.80 inc. VAT
Lead time usually 1-2 weeks

More images of the Jetway JNF9G-QM77

You may also require:

2GB DDR3 1333 SODIMM for JNF9G-QM77
  £26.40 inc. VAT
Lead time usually 1-3 days

4GB DDR3 1333 SODIMM for JNF9G-QM77
  £39.60 inc. VAT
  IN STOCK (Checked 08:11 GMT)

8GB DDR3 1333 SODIMM for JNF9G-QM77
  £70.80 inc. VAT
Lead time usually 3-5 days

Add a Processor:

JNF9G Backplate for C1/C2-RACK Chassis
  £12.00 inc. VAT
  IN STOCK (Checked 08:11 GMT)

4x Gigabit LAN PCIe Daughterboard Module (Realtek RTL8111F Chipset)
  £54.00 inc. VAT
  IN STOCK (Checked 08:11 GMT)

4x Gigabit LAN PCIe Daughterboard Module (Intel 82574L Chipset)
  £70.80 inc. VAT
  IN STOCK (Checked 08:11 GMT)

4x Serial PCIe Daughterboard Module
  £30.00 inc. VAT
  IN STOCK (Checked 08:11 GMT)

Add an mSATA drive:


Jetway JNF9G-QM77 Mini-ITX board with Intel QM77 Express chipset supporting Intel Mobile Socket G (rPGA 988B) processors under 45W. Featuring integrated Intel HD graphics and Realtek ALC662 6 channel Audio; PCI Express x16; Up to 16GB of DDR3 RAM; 2x Gigabit LAN (Intel 82574L and Intel 82579LM, Expandable with up to 4 more via Daughterboard); AMT Support; 4x SATA with RAID 0, 1, 0+1, 5; 1x Mini PCI Express slot supporting mSATA; 1x half-size Mini PCI Express slot; 1x HDMI, 1x DisplayPort & 1x VGA video outputs; 4x USB 3.0 (inc 2 internal); 6x USB 2.0 (inc 4 internal).

Jetway JNF9G Mini-ITX motherboards have a unique expansion slot to add additional ports and functionality - up to 4x Gigabit LAN (shown in photo), 4x Serial Ports and more are available. These ports are available inside the IO area of the motherboard and do not usually require an additional PCI-Slot.

Long Life: Product availability forecasted at least to End 2016.

Expandable with a Jetway PCI-Express Daughterboard Module

Jetway Daughterboard modules: The JNF9G uses the "Gen2" PCI-E based modules. Please select these from the "You may also require" area on the left.

Rear Panel Connectors: 2x USB 2.0; 2x USB 3.0 (coloured blue); 2x Gigabit LAN; 1x HDMI; 1x DisplayPort; 1x VGA; 1x COM Port; 3x 3.5mm audio connectors.

Board connectors: 24pin ATX Main power connector (works with 20pin or 24pin PSU); 12V 4pin P4 (must be connected); SATA connectors: 2x SATA 6Gb/s (coloured black and white), 4x SATA 3Gb/s (coloured blue); 2x Front panel USB 2.0 headers (for 4 ports); 1x Front Panel USB 3.0 header (19pin, for 2 ports); 3x RS-232 Com Port header; 1x RS-422/485 Port header; 8-Channel GPIO header; 1x Consumer IR Header; 1x SMBus header; 2x DDR3 SODIMM Sockets; PCI Express x16 bus add-in card connector; Half-size Mini-PCI Express card slot; Full-size Mini-PCI Express card slot with mSATA support; 24-Bit LVDS Connector; LVDS Inverter Header; Front panel audio header; 1x SPDIF Digital Audio; Front Panel Connector (Power/Reset Button, power/HDD status LED); 2x LAN Activity LED; Clear CMOS Jumper; 2x System and 1x Processor fan headers.

Expansion: 1x PCI-Express x16 slot; 1x shared mSATA/mini-PCI Express Slot; 1x Half-Size Mini PCI-Express Slot; 1x Jetway Embedded PCI-Express Daughterboard Expansion Slot.

Onboard RAID: The JNF9G-QM77 supports Intel Rapid Storage Technology which provides the following RAID levels via the Intel QM77 Express Chipset: RAID 0 - data striping; RAID 1 - data mirroring; RAID 0+1 (or RAID 10) - data striping and mirroring; RAID 5 - distributed parity.

Suitable cases: All of our Mini-ITX chassis with at least a 120W power supply using the supplied low-profile heatsink.

C1/C2/C3-RACK compatibility: Backplates are available designed for use with the C1-RACK, C2-RACK and C3-RACK (Dynatron K2 1U Side blower heatsink recommended).

iAMT 8.0 Remote Management: The JNF9E-Q77 supports Intel's Active Management Technology to give hardware based remote management, when combined with a suitable vPro-capable processor (e.g. i5-3320M, i7-3740QM, not i7-3630QM).

Suitable Processors: The JNF9G-QM77 board supports 3rd Generation Intel® Core i7/i5/i3/Pentium Mobile Processor. The JNF9G-QM77 is *not* provided with a processor. Please contact us for Mobile Processor pricing.

Cooling: The heatsink supplied with the motherboard will cool CPUs up up to 45w TDP. This low-profile cooler should be compatible with all cases.

Memory Note: The JNF9G uses DDR3 SODIMM memory. This is not compatible with other types of memory. Fully tested DDR3 SODIMMs are available here.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.


Search tools:
Board Finder
Case Finder
Mini PC Finder

Cards accepted:
Secure Shopping: