More images of the JNF9HG-2930
You may also require:
Add mSATA Drive:
Long-life cycle board with ultra-low profile form factor (20mm high). Fanless 1.83GHz Intel Quad Core N2930 Bay Trail-M processor and integrated 313MHz - 854MHz Intel HD Graphics. 4x Intel i211AT Gigabit Ethernet Ports. Up to 16GB of system memory supported on 2x 8GB DDR3L SODIMMs. mSATA, PCI Express x1, SIM Card and Mini PCI-E Slots.
Rear Panel Connectors: 12V regulated DC Input, 1x Serial Port (RS232/422/485); 1 USB 2.0 Port; 1x USB 3.0 Port; 4x Intel i211AT Gigabit Ethernet.
Graphics and Audio: A standard DB9 VGA connector on a header cable is provided which can be connected to a cutout on the full size IO shield or to the case directly in some instances (e.g. M5X, M5XP, C146). There is no audio output on this motherboard.
Board Connectors: 1x VGA Header (VGA connector on cable provided); 1x 2pin 12V alternate power connector (cannot be used at the same time as the external DC input); 1x 4pin Power out (male, cable provided); 2x DDR3L SODIMM Sockets; 1x PCI-Express x1; 1x Full Mini PCI-Express (Full and Half Length, no adapter required); 2x SATA 3Gb/s; 1x Full mSATA (shared with 1x SATA port); 1x RS232 Serial header; 4x USB 2.0 headers on 2x 9pin connectors; 1x SIM Card Holder (suitable Mini PCI-E Card required); 1x 8-bit GPIO; 4x 2-pin LAN LED Headers; 3x 4-pin Fan Headers; 1x 2pin LAN LED header; 1x 2pin S/PDIF header; 1x 5pin SMBUS (i2C) header; 1x 9-pin Front Panel Header; 1x 9-pin Audio; 1x 7-pin PS/2 Keyboard/Mouse header. Edge connector at side of board for expansion (suitable enclosure required).
Important! This board has a 12V DC Power input and is not designed for use with a standard ATX PSU: The JNF9HG-2930 requires a 12V AC Adapter to power the board at the rear and feeds power to up to 2 other SATA devices through an on-board 4pin power output connector. There is an alternate 12V input on a 2pin Molex 5566-2 connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case. 80W is enough to power 3x HDDs or Slimline Optical Drives, but we *do not* recommend powering a full size optical drive.
Powering devices: An internal 4pin power output cable is provided. Other devices (including SATA slimline optical drives and CF cards) may require additional cables. Please email before ordering. Don't forget you can install Linux and Windows 7 from a USB key very easily!
Suitable cases (with PSU): All Mini-ITX Chassis can be used with the JNF9HG-2930 if their PSU is bypassed and a 12V external AC Adapter is used (60W minimum).
Box contents: Motherboard, VGA cable, SATA cable, Product Manual, Short depth Thin-ITX IO Shield and Standard I/O Shield with VGA push-out, Driver and Software CD, Serial Cable, Half to Full Mini PCI-E bracket.
*Note: The JNF9HG supports up to 16GB DDR3L memory on 2x 8GB 1.35V DDR3L SODIMMs (16GB verified by Mini-ITX.com).This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.