More images of the Jetway JNF9J-Q87
You may also require:
Add a Processor:
Add mSATA Drive:
Jetway JNF9J-Q87 Long Life Mini-ITX board supporting Intel 4th Gen Core LGA1150 processors with integrated Intel HD graphics and 6 channel Realtek ALC662 5.1 Audio; Up to 16GB of DDR3 1333/1600MHz RAM; Intel i217LM PHY Gigabit LAN with iAMT 9.0; Intel i211AT PCI-E Gigabit LAN; 5x SATA 6Gb/s; 1x Full Size Mini PCI-E or mSATA slot; VGA (up to 1920 X 1200), DVI-D (up to 1920 x 1080), HDMI (up to 1920 x 1080) graphics outputs; 4x Serial Ports (inc 2 internal); 4x USB 3.0 (inc 2 internal); 8x USB 2.0 (inc 4 internal); Intel Active Management Technology (iAMT 9.0)
Rear Panel Connectors: 1x RS232/422/485 jumperless Serial Port; 1x RS232 Serial port; 2x USB 3.0; 1x HDMI; 1x VGA; 1xDVI-D; 2x Intel Gigabit LAN; 4x USB 2.0; 3x 3.5mm audio connectors.
Board connectors: PCI Express 3.0 x16 slot; 1x Shared Mini-PCI Express or mSATA Slot (full size); 24-pin ATX Power Connector & 4-pin 12V ATX Power Connector (both must be connected); 2x Serial RS232 headers (1 header supports RS232/422/485); 2x USB 2.0 headers (for 4 ports); 1x USB 3.0 header (for 2 ports); 5x SATA 6Gb/s connectors; 2x DDR3 SODIMM Sockets; 1x 24-bits Dual Channel LVDS connector/Inverter; 1x GPIO header; 1x PS2 Keyboard/Mouse header; 1x Chassis Intrusion header; 1x Front panel header; 3x Fan headers; 9-pin Front panel audio header; Battery.
Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the Jetway JNF9J-Q87 with a standard Intel Socket 1150 heatsink: The ES32067, ES30068, ES34069, Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.
iAMT 9.0 Remote Management: The JNF9J-Q87 supports Intel's Active Management Technology to give hardware based remote management, when combined with a suitable vPro-capable processor (most, but not all i5-45xx, i5-46xx and i7-4xxx processors).
Suitable Processors: The JNF9J-Q87 board supports 4th Gen (Haswell) processors. The JNF9J-Q87 is not provided with a processor. Suitable processors are available here or in the 'you may also require' section to the left.
Heatsinks: The standard heatsink provided with the CPU will fit taller cases (including Compucase 8K01/8K07, Jou Jye 526/528/568). To use this board in a low profile case (e.g. M300, M350) please use the Akasa 7106HP Low Profile heatsink. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink.
Suitable Memory: The JNF9J-Q87 uses DDR3 SODIMM memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 SODIMMs are available here.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.