You have visited using a link to a product that is no longer available.
We have directed you to the nearest replacement product.

Jetway MI97R-30 Fanless 1.83GHz Quad Core Celeron Mini-ITX Board with 12V DC Input (JNF9T Replacement)

Jetway MI97R-30
£215.00  
£258.00 inc. VAT
IN STOCK (Checked 03:55)

Mini-ITX Board with fanless 1.83GHz Intel Quad Core N2930 Bay Trail-M processor and integrated 313MHz - 854MHz Intel HD Graphics. Up to 8GB of system memory supported on 1x 8GB DDR3L SODIMM. Realtek RTL8119I Gigabit Ethernet and High Definition Realtek ALC888 4 Channel HD Audio with 3W Speaker Amplifier. SATA, PCI Express x1, 3x M.2 Slots (B, E, M).

JNF9T Replacement: This board is the nearest replacement to the JNF9T-2930, with identical back panel design but also several differences including: The JNF9T had Mini PCI-E, mSATA, Intel 82583V Ethernet; The MI97R has M.2 Type-E (for WiFi), M.2 Type-B (for WWAN), M.2 Type-M (for SATA M.2 Storage), Realtek RTL8119I Ethernet. Both boards have 1x SATA.

Rear Panel Connectors: +12V 2.5mm Regulated DC-In Power Jack, 1x Parallel Port, 1x HDMI (1920×1200@60Hz), 1x VGA (1920×1200@60Hz), 1x Combined PS/2 Mouse/Keyboard Port, 3x USB 2.0, 2x RS232 Serial, 1x Gigabit Ethernet, 1x USB 3.0, 2x 3.5mm Audio (Line Out, Mic In).

Board Connectors: 1x 2pin 12V alternate power connector (Molex 5566-2 connector, cannot be used at the same time as the external DC input); 1x 4pin Power out (Male FDD Molex, cable required); 1x DDR3L SODIMM Socket; 1x PCI-Express x1; 1x M.2 2230 Type-E Slot (USB/PCIe, for WiFi cards); 1x M.2 3042 Type-B Slot (USB with SIM holder, for WWAN cards); 1x SATA 3Gb/s; 1x M.2 2242/2280 (SATA, for Storage); 3x RS232 Serial headers (+5V/+12V); 4x USB 2.0 headers on 2x 9pin connectors; 1x 8-bit GPIO; 1x 24bit dual channel LVDS header/inverter (1920×1200@60Hz); 1x eDP (2560×1600@60Hz, co-layout with LVDS); AT/ATX Mode Jumper; 1x 4-pin Fan Header; 1x 5pin SMBUS header; Front Panel Header; 1x 9-pin Audio Header.

12V DC Power input: The MI97R requires a 12V AC Adapter to power the board and feed power to a SATA device through a power-out connector (cable available optionally here). If you are using M.2 SATA storage, a cable is not required. There is an alternate 12V input on a 2pin Molex 5566 connector which can also be used (though not at the same time as the rear input). We sell several enclosures without power supplies, or you can bypass the PSU on any other compatible Mini-ITX case.

Powering from an ATX PSU: To power using an ATX PSU, an ATX Bridging Plug can be connected to the ATX connector of the PSU, and the 12V P4 plug (Black/Yellow cables) connected to the motherboard. Use the AT/ATX Mode jumper to control power up behaviour (AT Mode = power on immediately, ATX Mode = power when power switch pressed).

Windows 7/10 Support: Windows 7 32/64-bit and Windows 10 are supported on this motherboard.

Downloads: BIOS, Documentation and Drivers

Box Contents: Motherboard, I/O Shield. To use the SATA connector, a Female Floppy to SATA power cable is required.

*Note: The MI97R supports up to 8GB DDR3L memory on 1x 8GB 1.35V DDR3L SODIMM. This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory, available in the 'You may also require' section on the left.

Specifications
Model Jetway MI97R-30
Processor Intel N2930 Quad Core, 1.83 GHz up to 2.16GHz
Architecture Bay Trail
Chipset Intel HM65
Cooling
Type Fanless
Connectors 1x CPU Connector 4-pin
1x System Connector 4-pin
Graphics
Displays 2
Outputs 1x HDMI 1920x1200 @ 60Hz max res.
1x VGA 1920x1200 @ 60Hz max res.
1x LVDS 1920x1200 @ 60Hz max res.
1x eDP 2560x1600 @ 60Hz max res.
Memory
Maximum 8GB
Socket 1x SODIMM
Type DDR3L 1600MHz, 1333MHz
Storage
Ports 2
Type 1x M.2 SATA 2242/2280 Slot Board
1x SATA 3Gb/s
Network
LAN Ports 1
LAN 0: Realtek RTL8119I 1Gbps
USB
Connectors 9
Types 3x USB 2.0 Type A Rear
5x USB 2.0 on pin header Board Pins
1x USB 3.0 Type A Rear
Audio
Chipset Realtek ALC888S Supports 2 Channel audio
Connectors 1x 3.5mm Line Out
1x 3.5mm Mic
Expansion
PCI-Express 1x PCI Express x1
M.2 WiFi 1x M.2 Type 3042 B-key slot for USB 2.0 WWAN Unpopulated
1x M.2 Type-E 2230 slot for WiFi/BT Unpopulated
Serial Ports
2x DB9 Serial COM port RS232
3x Serial Port on board header RS232
Other I/O Ports
PS/2 Mouse Port
1x SIM Card Socket
Power
DC-Jack 2.5/5.5mm connector 12 V
2-pin +12V Alternate Power connector 12 V
Additional Board Headers
AT/ATX Mode Jumper
Chassis Intrusion Header
GPIO Header
HD Audio Header
LVDS Header
SMBUS Header
System Front Panel Header
VGA Header
eDP Header
OS Support
Windows 7
Windows 10