More images of the Jou Jye 568i Mini-ITX Case 250W
You may also require:
High quality Mini-ITX enclosure now with updated High Efficiency 80+ Bronze 250W AC power supply capable of powering all Mini-ITX boards. Strong steel construction with solid plastic front panel. Can be mounted vertically or horizontally.
The 568i is identical internally to the 528i, but with a fully black partially meshed front panel.
Drive Bays: 2.5in HDD, Slimline Optical and a Half Height PCI/PCI Express Card bays. If no card or optical drive is fitted, 2x 2.5in HDD is possible. If fitting an optical drive an appropriate optical adapter or cable will be required.
Other Drive Bay Options: With the optional Front 2.5in/3.5in Mounting Kit and/or PCI Riser more options are available:
With 2.5in/3.5in Kit:
With PCI Riser:
With PCI Riser & 2.5in/3.5in Kit:
It is just about possible with flexible and short enough SATA data/power cables to fit the 2.5in drive directly underneath the plastic front panel, allowing the 3.5in tray to fit. This adds the option of 2.5in + 3.5in + Low Profile PCI/PCI Express (use a Low profile heatsink for socket boards - only recommended for patient customers/modding enthusiasts!)
Front Panel: Illuminated Power Switch with Blue LED; 2x USB 2.0; 2x 3.5mm Front Audio; Slimline Optical Drive Slot with Blanking Plate.
Power Supply and Cooling: Internal 250W Universal 110/240V Flex-ATX 80+ Bronze PSU provided with UK power cable. Internal power loom provides power connectors for 20pin ATX, 12V P4, 4pin Molex (IDE HDD), SATA Power and Floppy (slimline optical drive). A 60mm fan can optionally be fitted on the right side of the case if board component positioning allows - not required in 99% of situations.
Measurements: 88(H) x 254(W) x 218.8(D) (3.5 x 10 x 8.6in)
Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks). Socket boards require a 1U or Low Profile heatsink only if a 3.5in HDD is to be used (3.5in HDD drive cage also required). Note: Front USB cable not long enough to reach USB connector on Zotac-H55-ITX board.
Building Tip: Remove the Power Supply to install your motherboard.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.