More images of the MSI H97I AC
You may also require:
Add a Processor:
MSI H97I AC Mini-ITX board with Intel H97 Express chipset supporting Intel 4th Gen (Haswell) and future 5th Gen (Broadwell) Core LGA1150 processors only. Integrated Intel HD graphics and 8 channel Audio; PCI Express 3.0* x16; Up to 16GB of DDR3 RAM; Gigabit LAN; 4x SATA with RAID 0, 1, 0+1, 5; 1x Half length Mini PCI Express slot (occupied by WiFi card); 1x DisplayPort, 1x HDMI, 1x DVI-I graphics outputs; S/PDIF; 6x USB 3.0 (inc 2 internal); 4x USB 2.0 (inc 2 internal); 802.11 ac/a/b/g/n, dual band (2.4GHz, 5GHz) up to 867 Mbps speed and Bluetooth 4.0. * PCI Express 3.0 support is dependent on PCI-Express device capability.
Rear Panel Connectors: 2x USB 2.0; Clear CMOS button, GO2BIOS button; Optical S/PDIF-out connector; HDMI (up to 4096x2160 @24Hz,24bpp or 2560x1600 @60Hz,24bpp or 1920x1080 @60Hz,36bpp), DisplayPort (up to 4096x2160 @24Hz,24bpp or 3840x2160 @60Hz,24bpp); 2x WiFi Antenna; DVI-I (up to 1920x1200 @60Hz,24bpp); Realtek 8111G Gigabit LAN; 4x USB 3.0 (coloured blue); 6x 3.5mm audio connectors.
Board connectors: 24pin ATX Main power connector (20-pin power supplies will work); Processor core power connector (12V 4pin P4, must be connected); 4x SATA 6Gb/s connectors; 1x Front panel USB 2.0 header (for 2 ports); 1x Front Panel USB 3.0 header (19pin, for 2 ports); 1x Serial (COM) Port header; 2x 240-pin DDR3 DIMM Sockets; PCI Express 3.0 x16 bus add-in card connector; Half-Height Mini-PCI Express card slot (populated with Intel Dual Band Wireless-AC 7260 Wi-Fi/Bluetooth card pre-installed); Front Panel Audio connector; Front Panel Connector (Power/Reset Button, power/HDD status LED); Clear CMOS Jumper; System and Processor fan headers.
Onboard RAID: The MSI H97I AC supports Intel Rapid Storage Technology which provides the following RAID levels via the Intel H97 Express Chipset: RAID 0 - data striping; RAID 1 - data mirroring; RAID 0+1 (or RAID 10) - data striping and mirroring; RAID 5 - distributed parity.
Suitable Processors: The MSI H97I AC board supports 4th Gen (Haswell) and future 5th Gen (Broadwell) processors. The MSI H97I AC is *not* provided with a processor. Suitable processors are available here or in the 'you may also require' section to the left.
Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Some suitable cases that will work with the GA-Z87N-WiFi with a standard Intel Socket 1150 heatsink: The Venus 669, Compucase 8K01, Compucase 8K07, Silverstone SG05, Jou Jue NU-528i 220W and Jou Jue NU-568i 220W.
1U Case compatibility: To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink and a 35W or 65W TDP CPU.
Typical M350 configuration: To use this board in the M350, we recommend the 150W AC Adapter and picoPSU-150-XT or picoPSU-160-XT together with a 65W TDP CPU and Akasa 7106HP or K25 heatsink or 35W TDP CPU and supplied heatsink, plus 1 or 2 sticks of DDR3 RAM and a 2.5in HDD/SSD (add an M350 HDD tray to use 2x HDD/SSDs).
Multiple Screens: This board supports 2 independent screens. 3 outputs is possible if a DVI-I to VGA adapter is used for the 3rd output (i.e. 2x digital HDMI and 1x analogue VGA). 3x digital outputs is not possible due to chipset limitations.
Downloads: BIOS, Documentation and Drivers.
Package Contents: 2x SATA cables, 1x I/O back plate, 1x Driver and Software DVD, 2x WiFi Antenna.
Suitable Memory: The MSI H97I AC uses 1066/1333/1600MHz DDR3 memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3 DIMMs are available here or in the 'you may also require' section to the left.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.