Gigabyte N3050N-D2P Dual Core 1.6GHz Celeron Mini-ITX Board with PCI, Serial, Parallel, VGA, 4K HDMI

Gigabyte N3050N-D2P Dual Core 1.6GHz Celeron Mini-ITX Board
Long Lead Time

More images of the Gigabyte N3050N-D2P

You may also require:

2GB DDR3 1333 DIMM for N3050H
Long Lead Time

4GB DDR3 1333 DIMM for N3050H
  £39.60 inc. VAT
  IN STOCK (Checked 22:18 GMT)

Short Molex HDD to 12V P4 Power Cable
  £4.20 inc. VAT
  IN STOCK (Checked 22:18 GMT)

Excellent value Gigabyte GA-N3050N-D2P motherboard with Passively Cooled Dual Core 64-bit 1.6GHz (2.16GHz Burst) Celeron N3050 Braswell 14nm processor with VT-x support and integrated Intel HD Graphics. Up to 8GB of system memory; 2x SATA 6Gb/s; PCI Slot; Realtek Gigabit Ethernet; Realtek ALC887 High Definition 7.1 Channel Audio. Windows 7/8.1 64-bit and Windows 10 32/64-bit driver availability.

Rear Panel: 1x Parallel Port; 1x RS232 Serial port; 1x VGA (supporting up to 1920x1200@60 Hz); 4x USB 3.0 ports; 1x HDMI (supporting up to 3840x2160@30 Hz); 1x Gigabit Ethernet port; 3x 3.5mm audio connectors (Line In, Line Out, Mic In).

Board Connectors: 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 1x 12V P4 connector (needs to be connected); 2x SATA 6Gb/s ports; 2x USB 2.0 connectors on 1x 9pin header; 1x Serial Port header; 1x Processor Fan Header; 1x System Fan Header; 1x Front Panel Header; 1x Front Panel Audio Header; 1x Chassis Intrusion Header; 1x Clear CMOS Jumper.

Board Expansion: 1x PCI Slot.

Unique Features: Support for @BIOS; Support for Xpress Install; Support for APP Center.

UEFI BIOS: This board uses a UEFI BIOS. To enter the BIOS press Delete on your keyboard during startup. If you enter the EFI shell (commmand prompt) type "exit".

Installing Windows 7: To install Windows 7 on *any* Braswell or Skylake motherboard modified installation media with xHCI drivers included is required, or the install will appear to freeze at the language select screen. Installation tools are available from ASRock (not manufacturer specific), Gigabyte and Zotac

Case compatibility: The N3050N-D2P has a standard height heatsink and low power requirements. A 20pin or 24pin ATX connector can be used but the 12V P4 connector must also be connected. Check individual case descriptions and add the Molex to P4 Power Cable option where necessary. All our Mini-ITX cases will fit the board including but not exclusively Jou Jye 528i/568i/526i, CFI Chassis, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with a picoPSU fitted with a 12V P4 output), Travla C146, T1200, C159, Thin Clients, Travla C158 (inc CD drive), Compact and Lockable Wall Mount Cases.

M350/M5X Compatibility: The N3050N-D2P will work with the M350 or with the M5X (picoPSU-90, 60W or 80W AC Adapter recommended), or the M5XP (version of M5X with included power supply).

Box contents: Motherboard, 2x SATA cables, Product Guide, I/O Shield.

Memory: The N3050N-D2P supports up to 8GB DDR3 memory on 2x DDR3 or DDR3L DIMMS (up to 4GB each). If using one memory module, install into the UDIMM_1 socket. DDR3 memory will step down to 1066MHz. DDR3 is not compatible with DDR2 memory. Fully tested DDR3L DIMMs are available in the 'you may also require' section.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.


Search tools:
Board Finder
Case Finder
Mini PC Finder

Cards accepted:
Secure Shopping: