More images of the Gigabyte N3150N-D3V
You may also require:
Excellent value Gigabyte GA-N3150N-D3V motherboard with Passively Cooled Quad Core 64-bit 1.6GHz (2.08GHz Burst) Celeron N3150 Braswell 14nm processor with VT-x support and integrated Intel HD Graphics. Up to 8GB of system memory; 4x SATA 6Gb/s; PCI Slot and M.2 Socket 1 connector for WiFi modules; 2x Serial Ports on the rear panel; 2x Realtek Gigabit Ethernet; Realtek ALC887 High Definition 7.1 Channel Audio. Windows 7/8.1 64-bit and Windows 10 32/64-bit driver availability.
Rear Panel: Mouse PS/2 port; Keyboard PS/2 port; 2x RS232 Serial ports; 1x VGA (supporting up to 1920x1200@60 Hz); 1x DVI-D (supporting up to 1920x1200@60 Hz); 2x Gigabit Ethernet ports; 2x USB 2.0 ports; 2x USB 3.0 ports; 3x 3.5mm audio connectors (Line In, Line Out, Mic In).
Board Connectors: 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 1x 12V P4 connector (needs to be connected); 4x SATA 6Gb/s ports; 2x USB 2.0 connectors on 1x 9pin header; 2x USB 3.0 connectors on 1 header; 1x Parallel Port header; 1x Processor Fan Header; 1x System Fan Header; 1x Front Panel Header; 1x Front Panel Audio Header; 1x Chassis Intrusion Header; 1x Clear CMOS Jumper.
Board Expansion: 1x PCI Slot; 1x M.2 Socket 1 connector for WiFi modules.
Unique Features: Support for @BIOS; Support for Xpress Install; Support for APP Center.
UEFI BIOS: This board uses a UEFI BIOS. To enter the BIOS press Delete on your keyboard during startup. If you enter the EFI shell (commmand prompt) type "exit".
Installing Windows 7: To install Windows 7 on *any* Braswell or Skylake motherboard modified installation media with xHCI drivers included is required, or the install will appear to freeze at the language select screen. Installation tools are available from ASRock (not manufacturer specific), Gigabyte and Zotac
Case compatibility: The N3150N-D3V has a standard height heatsink and low power requirements. A 20pin or 24pin ATX connector can be used but the 12V P4 connector must also be connected. Check individual case descriptions and add the Molex to P4 Power Cable option where necessary. All our Mini-ITX cases will fit the board including but not exclusively Jou Jye 528i/568i/526i, CFI Chassis, Noah 3988, Chenbro NAS, Venus 669, Nexus Psile, M200/M300/M350 (with a picoPSU fitted with a 12V P4 output), Travla C146, T1200, C159, Thin Clients, Travla C158 (inc CD drive), Compact and Lockable Wall Mount Cases.
M350 Cabling: The position of the FPANEL pins on this board is too far for the standard M350 power/LED cables to reach. Please purchase the extended M350 cables if this chassis is to be used.
Box contents: Motherboard, 2x SATA cables, Product Guide, I/O Shield.
Memory: The N3150N-D3V supports up to 8GB DDR3 memory on 2x DDR3 or DDR3L SODIMMS (up to 4GB each). If using one memory module, install into the SODIMM_1 socket. DDR3L is recommended as if using DDR3, memory will step down to 1066MHz. DDR3 is not compatible with DDR2 memory. Fully tested DDR3L DIMMs are available in the 'you may also require' section.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.