More images of the picoPSU-80-WI-32
You may also require:
The picoPSU-80-WI-32 plugs directly into a motherboard ATX connector and measures just 31x45x20mm - about the size of two AA batteries. The picoPSU-80-WI-32 generates up to 80 Watts of power (120 Watts peak) from a regulated 12-32V DC supply, at over 93% efficiency. An attached cable harness provides:
Compatibility: The picoPSU-80-WI-32 can power all our Mini-ITX boards with Geode, C3, C7, Atom and Fusion processors. Additionally some lower power consumption Mini-ITX boards with Intel and AMD processors up to around 45W TDP can be powered. More powerful picoPSUs offer more headroom for additional devices. If you are considering using with a board not on our site, please email us to check compatibility.
Compatible AC Adapters:
Adding more SATA drives: The picoPSU-80-WI-32 has one SATA connector and a Molex connector. To power more SATA drives use a Molex to SATA or 2x SATA cable.
P4 Power Connectors: If your board has a 4-pin 12V P4 power connector, you will need to use a Molex to 12V P4 Power Cable, or a different picoPSU.
Regulated Voltage Required: A stable and regulated voltage of between 12 and 32 Volts is required to use this picoPSU, connected by a standard 2.5mm /5.5mm DC Jack or Mini-Fit JR connector. Our 12V AC Adapters are suitable for this picoPSU. Please read their product listings to determine which is most suitable for you.
Long Life: The picoPSU-80-WI-32 is marked for long life production and is guaranteed to have a life cycle of 5 years or more.
Notes: Not suitable for use with batteries or unregulated power sources.
Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.