Mini-ITX A7879 4-Bay NAS Chassis
This solidly constructed steel chassis has 4 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. Full height PCI/PCI-Express cards are supported.
Bays: 4x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies.
Cooling: 1x 120mm Rear Fan (quiet).
Front Panel: 2x USB 2.0 Sockets; Power Button; Reset Button; Power and Storage Activity LEDs; Each Drive Caddy has Power and Activity Indicators.
Power Supply: Internal 200 Watt Flex-ATX PSU with quiet 40mm Fan. UK power cord provided as standard. Power connectors: 1x 20/24pin ATX; 1x 12V P4; 2x Molex (fitted to the SATA backplanes, to power the 4x drive bays).
Fitting 5 or 6 Drives: It is possible to fit additional 2.5in drives into the space either side of the drive trays, positioned upright with adhesive pads. Use a Female Molex to Male Molex & SATA cable inline with a power connector fitting to one of the SATA backplanes. These Molex connectors are tight - but can be removed with care by removing the bottom 2 drive trays and unscrewing the backplane from the front, remove the backplane and gently wiggling till the connector releases.
Measurements: 200mm (W) x 250mm (H) x 298mm (D) (7.9in x 9.84in x 11.73in). Volume: 14.9 litres
Supported Boards: All Embedded (e.g. Celeron) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards can be used if fitted with low profile <=30mm heatsink. Retail 35W TDP Intel CPUs come with suitable low profile heatsinks.
|Model||Mini-ITX A7879 NAS Chassis 200W|
|Bay 1||1x 2.5in or 1x 3.5in|
|Bay 2||1x 2.5in or 1x 3.5in|
|Bay 3||1x 2.5in or 1x 3.5in|
|Bay 4||1x 2.5in or 1x 3.5in|
|Max Width Card||Double|
|Fans Supported||1x 120mm||Rear|
|CPU Cooler||30mm||Max height|
|2x USB 2.0 Type A||Front|
|W x D x H||200 x 298 x 250 mm|