Cubid 2757 60W Industrial Mini-ITX Chassis with PCI
Cubid 2757 Industrial Mini-ITX Chassis constructed from a steel and aluminium frame with a strong steel front panel and stand for vertical mounting.
Bays: 1x 2.5in Hard Drive or SSD; 1x 3.5in Hard Drive; 1x PCI (right angled single PCI riser card provided).
Front Panel: Power & HDD LEDs.
Rear Panel: Power switch; 1x Serial port shaped knock-out; PCI slot; Additional lower PCI slot can be used to present more connectors on a PCI Backplate.
PCI Card Support: PCI Riser card included. PCI cards up to 16cm long can be fitted with a 2.5in HDD installed; PCI cards up to 22cm can be fitted without a 2.5in installed.
PCI Express Support: To fit a PCI Express card use our FR10X PCI Express Riser Cable. Please note that the FR10X is quite rigid, but it can be manipulated into place.
Power Supply: External 60W Universal 110/240V AC adapter and internal 60W DC converter.
Internal Power Connectors: 20+4pin ATX Power Connector, 12V P4 Connector, 1x SATA Power, 1x Molex HDD, 1x Floppy Power.
Cooling: Internal 60mm x 10mm cooling fan with 3pin connector.
Measurements: 63.5(H) x 295(W) x 288(D) mm. (2.5 x 11.6 x 11.3in) Volume: 5.39 litres.
Supported Boards: Embedded Mini-ITX boards with ATX connectors and standard height heatsinks.
|Model||Morex Cubid 2757 60W|
|Bay 1||1x 2.5in|
|Bay 2||1x 3.5in|
|Max Width Card||Single|
|Fans Supported||1x 60mm||Rear|
|CPU Cooler||45mm||Max height|
|Input||AC||C13 Power Connector|
|W x D x H||295 x 288 x 63.5 mm|