ASRock J5040-ITX Quad Core Pentium Silver Mini-ITX Board with PCI-E x1, Gigabit LAN, HDMI, DVI-D, VGA and 4x SATA 6Gb/s, up to 64GB RAM

ASRock J5040-ITX motherboard with Passively Cooled Quad Core 64-bit 2GHz (3.2GHz Burst) Pentium Silver J5040 Gemini Lake Refresh 14nm processor with VT-x support and integrated Intel UHD 605 Graphics with 10-bit HEVC Acceleration. Up to 64GB of system memory*; 4x SATA 6Gb/s; PCI-E x1 Slot; Realtek RTL8111H Gigabit Ethernet; Realtek ALC892 High Definition 7.1 Channel Audio with S/PDIF Out. Windows 10 64-bit driver support.

Rear Panel: Mouse PS/2 port; Keyboard PS/2 port; 1x VGA (supporting up to 2048x1536 @ 60Hz); 1x DVI-D (supporting up to 1920x1200 @ 60Hz); 1x HDMI (supporting up to 4096x2160 @ 60Hz); 2x USB 3.2 Gen1 ports; 1x Gigabit Ethernet port; 2x USB 2.0 ports; 1x S/PDIF Optical Audio Out; 5x 3.5mm audio connectors (Side Speaker / Rear Speaker / Central / Bass / Line in / Front Speaker / Microphone).

Board Connectors: 1x 24pin ATX Power Connector (either 20pin or 24pin ATX will work); 4x SATA 6Gb/s ports; 3x USB 2.0 connectors on 2x 9pin headers; 2x USB 3.2 Gen1 connectors on 1 header; 1x Serial Port header; 1x Processor Fan Header; 1x System Fan Header; 1x Front Panel Header; 1x Front Panel Audio Header; 1x Chassis Intrusion Header.

Board Expansion: 1x PCI-E x1 Slot; 1x M.2 Type E Socket suitable for M.2 WiFi/Bluetooth Cards including Intel CNVi modules.

Intel UHD 605 Graphics: 18 EUs inside (Up to 800MHz); Supports DirectX 12, OpenGL 4.4, OGL ES 3.1, OpenCL 1.2. Supports HEVC 10-bit Decoding/Encoding to provide substantially improved video quality and higher bit depth video experience.

Hardware accelerated Encode/Decode: HEVC (H.265) 8-bit, HEVC (H.265) 10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, VP9 8-bit. Additionally supports VP9 10-bit Hardware Decode. Triple Monitor Support. HDCP and Full HD 1080p Blu-Ray playback supported on DVI-D and HDMI ports.

UEFI BIOS: This board uses a UEFI BIOS. To enter the BIOS press Delete on your keyboard during startup.

Case compatibility: The J5040-ITX has a standard height heatsink and low power requirements. A 20pin or 24pin ATX connector can be used. This board will fit all our Mini-ITX cases.

M350/M5X Compatibility: The J5040-ITX will work with the M350 or with the M5X (picoPSU-90, 60W or 80W AC Adapter recommended), or the M5XP (version of M5X with included power supply).

Windows Compatibility: The J5040-ITX is compatible with Windows 10 64-bit and 11 64-bit. It is not compatible with Windows 7.

Box contents: Motherboard, 2x SATA cables, 1x M.2 Socket Screw (for Type E M.2 WiFi/Bluetooth Card), Install Guide, I/O Shield.

Downloads: Manual, BIOS and Windows drivers (Windows 10 drivers are compatible with Windows 11)

*Memory: The J5040-ITX supports up to 64GB DDR4 memory on 2x DDR4 SODIMMs (up to 32GB each, compatible memory required, yes we know this contradicts the Intel and ASRock websites - email us if you require further evidence!). Fully tested DDR4 SODIMMs are available in the 'you may also require' section. If using one memory module, install into the DDR4_A1 socket. DDR4 is not physically compatible with DDR3 memory.