Jetway JBC430 Pico-ITX Form Factor PC with Intel N3160 Quad Core CPU with AES-NI, 32GB eMMC SSD, M.2 and 4x Intel LAN
|Jetway JBC430 with 4x Intel LAN and 32GB SSD|
|£330.00 inc. VAT|
|IN STOCK (Checked 17:08)|
Tiny and Fanless Jetway JBC430 Pico-ITX Form Factor PC with Intel Celeron N3160 Quad Core processor with AES-NI, 4x Intel I211-AT Gigabit LAN, 32GB eMMC on board bootable storage, Additional M.2 SATA storage slot, HDMI, SIM card slot, Serial Port, TPM 2.0 and VESA mounting bracket included. Barebones unit - simply add a stick of DDR3L SODIMM memory and optionally an M.2 SATA drive to complete the internals of the JBC430.
The JBC430 is powered by a 1.6GHz (2.24GHz Burst) Quad Core N3160 Celeron processor with Intel HD Graphics 400 on a 100mm x 72mm Pico-ITX Form Factor motherboard. Stylish solid aluminium construction with external AC Adapter.
Storage: Bootable 32GB eMMC SSD included on board. Additional M.2 Type 2242 SATA storage slot can also be used for storage.
Bays: 1x M.2 Storage (SATA M-key, Type 2242); 1x Full Size SIM Card Slot, 1x Full Size USB 2.0 only Mini PCI-E slot (not compatible with standard Mini PCI-E cards)
Memory: 1x 204-pin socket supports up to 8GB DDR3L 1.35V SODIMM.
Front Panel: Power switch; Reset Button; Power LED; 2x USB 3.0; HDMI port.
Rear Panel: 4x Intel I211-AT Gigabit Ethernet; 12V DC-In power socket (2.5/5.5mm jack connects to supplied 36W AC Adapter); Blanking plates for 2x Antenna connections; 1x RJ45 Serial port.
Cooling: The JBC430 is a fanless device with integrated heatsink fins on the top and sides of the chassis and optional cooling vents on the rear. The JBC430 can be operated in temperatures of 0C to 50C with appropriate airflow and can be stored in temperatures of -20C to 80C.
Power Supply: Universal 100-240V External 40W AC Adapter with UK power cord connects to 12V power socket.
Accessories: AC Adapter; UK Power Cord (other power cords available); Screw pack; Driver DVD; Assembly Guide; VESA Mounting kit.
OS Compatibility: 32/64-bit drivers available for Windows 7, 8.1 and 10. Modern Linux distributions run very well on the JBC430. Ideally suited for pfSense usage due to Intel LAN ports and hardware AES-NI support.
Installing Windows 7: To install Windows 7 on any Braswell or Skylake motherboard modified installation media with xHCI drivers included is required, or the install will appear to freeze at the language select screen. Instructions provided in the user manual or here.
Booting from eMMC under Linux: Ensure you have at least the A03 BIOS (available here, make a DOS USB stick to install using Rufus). In the BIOS, ensure Chipset / South Bridge / SCC eMMC Support is Enabled and Boot / Boot Option #1 is set to MMC. Use the boot override menu to boot from your USB installer stick. If stuck, check your distribution supports the mmc_block kernel module (i.e. the storage device will show up something like /dev/mmcblk0).
Drivers and Manual: Available from here
WiFi: Wireless support can be added with a USB 2.0 via Mini PCI-E card, pigtails and antenna, or connect to a Wireless AP over Ethernet (recommended)
Measurements: 129 x 34 x 109 mm / 5.08 x 1.14 x 4.29in (W x H x D); Volume: 0.48 litres.
*Note: The JBC430 supports up to 8GB DDR3L memory on a 1.35V DDR3L SODIMM. This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory.
|Processor||Intel N3160 Quad Core, 1.6GHz up to 2.24GHz|
|Included||32GB onboard eMMC|
|Type||1x SATA M.2 Type 2242 Slot|
|LAN 0:||Intel i211-AT 1Gbps|
|LAN 1:||Intel i211-AT 1Gbps|
|LAN 2:||Intel i211-AT 1Gbps|
|LAN 3:||Intel i211-AT 1Gbps|
|Type||2x USB 3.0 Type A||(Front)|
|Mini PCI-Express||1x USB 2.0 only Mini PCI-E Slot||Full Length|
|1x SIM Card Slot||Standard, on board|
|Serial||1x RJ45 Serial COM port (Rear)||Serial COM Port|
|Input||100-240 AC||C14 Power Connector|
|W x D x H||129 x 109 x 34 mm|