Jetway JNF592-Q170 Long Life Socket 1151 Mini-ITX Board with 8x Intel LAN, 6x SATA 6Gb/s and HDMI

Jetway JNF592-Q170 Long Life Mini-ITX board supporting Intel 6th and 7th Core LGA1151 processors with integrated Intel HD graphics and 8x Intel Gigabit LAN ports; Up to 16GB of DDR3 RAM; 1x Intel i219LM PHY Gigabit LAN with iAMT 11.0; 7x Intel i211AT PCI-E Gigabit LAN; 1x Serial Port on RJ45 connection; 6x SATA 6Gb/s with RAID; HDMI pin header graphics output with audio support.

Available as part of our NA6 Network Server Appliances

Rear Panel Connectors: 1x RS232 Serial Port on RJ45 Connection; 2x USB 3.0; 1x Intel i219LM PHY Gigabit LAN with iAMT 11.0 Remote Access; 7x Intel i211AT PCI-E Gigabit LAN.

Board Connectors: 1x Full length Mini PCI-Express Slot; 24-pin ATX Power Connector & 4-pin 12V ATX Power Connector (both must be connected); 2x USB 2.0 headers (for 4 ports); 6x SATA 6Gb/s connectors supporting RAID 0, 1, 5, 10 and JBOD; 2x DDR3 SODIMM Sockets; 1x GPIO header; 1x PS2 Keyboard/Mouse header; 1x Chassis Intrusion header; 1x Front panel header; 3x 4-pin Fan headers; 1x SIM Card Holder; 1x HDMI header (see notes above); 1x PCI-Express x4 Side-Slot (only supports Jetway Expansion Modules).

WARNING: HDMI Connector on Flylead, not Rear Panel: This is a unique board designed primarily for connection by remote (network) access. The HDMI connection is mounted on a 25cm flylead, not on the rear panel. Some basic metalwork will be required if a fixed HDMI connector is required. For example the board can be fitted to the rear of the M5X through the DB9 punch-out slot if mounting holes are drilled either side. The cable can also be fitted to a PCI mounting bracket with a DB9 hole if mounting holes are drilled (we offer our own bracket as an option if you do not want to do this). Please ask about our build services if you would prefer a complete solution.

Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Please read our notes regarding the HDMI output.

iAMT 11.0 Remote Management: The JNF592-Q170 supports Intel's Active Management Technology to give hardware based remote management, when combined with a suitable vPro-capable processor

Suitable Processors: The JNF592-Q170 supports 6th and 7th Gen Intel processors. The JNF592-Q170 is not provided with a processor. Suitable processors are available in the 'you may also require' section to the left. If you are running Windows 7 you will require a 6th Gen processor.

Heatsinks: To use this board in a low profile case (e.g. M5X, M350) please use the Akasa 7106HP Low Profile heatsink. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink.

LAN ports in pfSense: pfSense will by default enumerate the LAN ports in the following order: igb6, igb5, igb4, igb3, igb2, igb1, igb0, em0; i.e. The rightmost port will be WAN looking from the rear.

Suitable Memory: The JNF592-Q170 uses DDR3L SODIMM memory. This is not compatible with DDR/DDR2 memory. Fully tested DDR3L SODIMMs are available in the 'you may also require' section to the left.