Jetway JNF594-Q170 Long Life Socket 1151 Mini-ITX Board with 2x Intel LAN, 4x SATA 6Gb/s, 4x Serial, Display Port, HDMI and DVI
| Jetway JNF594-Q170 | |
| £210.00 inc. VAT | |
| IN STOCK (Checked 08:55) |
Jetway JNF594-Q170 Long Life Mini-ITX board supporting Intel 6th and 7th Gen Socket 1151 processors with integrated Intel HD graphics and 2x Intel Gigabit LAN ports; Up to 32GB of DDR4 RAM; 1x Intel i219LM PHY Gigabit LAN with iAMT 11.0; 1x Intel i211AT PCI-E Gigabit LAN; 2x Serial Ports + 2x Serial Port Headers; 4x SATA 6Gb/s with RAID; 3 simultaneous displays from: HDMI; Display Port; DVI-D; LVDS.
Rear Panel Connectors: 1x DVI-D; 1x HDMI 2.0; 6x USB 3.0; 1x Display Port 1.2; 1x Intel i219LM PHY Gigabit LAN with iAMT 11.0 Remote Access; 1x Intel i211AT PCI-E Gigabit LAN; 2x Serial Ports (1x RS232, 1x RS232/422/485); 3x 3.5mm Audio Jacks.
Board connectors: 24-pin ATX Power Connector & 4-pin 12V ATX Power Connector (both must be connected); 1x USB 2.0 header (for 2 ports); 4x SATA 6Gb/s connectors supporting RAID 0, 1, 5, 10 and JBOD; 2x DDR4 SODIMM Sockets; 1x HDMI_SPDIF out header; 1x 10-pin GPIO header; 1x PS2 Keyboard/Mouse header; 1x Chassis Intrusion header; 2x Serial Port Headers (1x RS232, 1x RS232/422/485; 1x Front panel header; 3x 4-pin Fan headers; 1x 24-bit Dual Channel LVDS Connector/Inverter.
Board Expansion: 1x Full length mSATA / Mini PCI-Express Slot; 1x PCI-Express 3.0 x16 Slot.
Suitable Cases: All our Mini-ITX chassis with at least a 120W power supply, and an appropriate low profile heatsink if necessary. If using a larger than 65W TDP processor, a larger power supply than 120W may be required. Please read our notes regarding the HDMI output.
iAMT 11.0 Remote Management: The JNF594-Q170 supports Intel's Active Management Technology to give hardware based remote management, when combined with a suitable vPro-capable processor (Intel i5-6500(T), i5-6600(T), i7-6700(T) processors).
Suitable Processors: The JNF594-Q170 board supports 6th and 7th Gen Intel (Skylake and Kaby Lake) processors. The JNF594-Q170 is not provided with a processor. Suitable processors are available here or in the 'you may also require' section to the left.
Windows 7: If using Windows 7 you must use a Skylake (6th Gen) Intel processor. Windows 10 will work with both 6th and 7th Gen.
Heatsinks: The standard heatsink provided with the CPU will fit taller cases (including Compucase 8K01/8K07, Jou Jye 526/528/568). To use this board in a low profile case (e.g. M5X, M350) please use the Akasa 7106HP Low Profile heatsink. To use this board in a 1U case please use the Dynatron K2 1U Side blower heatsink.
*Planned Lifecycle: The stated "Planned Lifecycle" is not a guarantee of availability. The manufacturer reserves the right to change or modify these dates without notice.
Suitable Memory: The JNF594-Q170 uses DDR4 SODIMM memory running at 2133MHz. This is not compatible with DDR/DDR2 memory.
| Specifications | ||
|---|---|---|
| Model | Jetway JNF594-Q170 | |
| Processor Socket | Intel Socket 1151 | |
| Architecture | Kaby Lake | |
| Chipset | Intel Q170 | |
| CPU Compatibility | Intel 6th Gen, Intel 7th Gen | |
| Cooling | ||
| Connectors | 1x CPU Connector | 4-pin |
| 2x Fan Connector | 4-pin | |
| Graphics | ||
| Displays | 3 | |
| Outputs | 1x DisplayPort Display Port | 4096x2304 @ 60Hz max res. |
| 1x HDMI | 4096x2160 @ 60Hz max res. | |
| 1x DVI-D | 1920x1200 max res. | |
| Memory | ||
| Maximum | 32GB | |
| Sockets | 2x SODIMM | |
| Type | DDR4 | 2400MHz |
| Storage | ||
| Ports | 4 | |
| 4x SATA 6Gb/s | ||
| Network | ||
| LAN Ports | 2 | |
| LAN 0: | Intel i219-LM 1Gbps | |
| LAN 1: | Intel i211-AT 1Gbps | |
| USB | ||
| Connectors | 8 | |
| Types | 2x USB 2.0 on pin header | Board Pins |
| 6x USB 3.0 Type A | Rear | |
| Audio | ||
| Chipset | Realtek ALC662 | Supports 3 Channel audio |
| Connectors | 1x 3.5mm Line Out | |
| 1x 3.5mm Line In | ||
| 1x 3.5mm Mic | ||
| Expansion | ||
| PCI-Express | 1x PCI Express x16 | |
| Mini PCI-Express | 1x Shared Mini PCI-E/mSATA | Full Length |
| 1x Mini PCI-E | Half Length | |
| Serial Ports | ||
| 1x DB9 Serial COM port | RS232 | |
| 1x Serial Port on board header | RS232 | |
| 1x DB9 Serial COM port | RS232/422/485 | |
| 1x Serial Port on board header | RS232/422/485 | |
| Other I/O Ports | ||
| PS/2 Mouse Port | ||
| Power | ||
| 24-pin ATX power connector | ||
| 4-pin ATX +12V power connector | ||
| OS Support | ||
| Windows 7 | ||
| Windows 10 | ||