Home | Motherboards | JNF9N-2930


Jetway JNF9N-2930 Long Life Fanless 1.83GHz Quad Core Celeron Mini-ITX Board with ATX and DC Input - Expandable to 5x Gigabit LAN

Jetway JNF9N-2930
£149.00  
£178.80 inc. VAT
IN STOCK (Checked 02:11)

Expandable Long-life board with both ATX and DC input power options. Fanless 1.83GHz Intel Quad Core N2930 Bay Trail-M processor and integrated 313MHz - 854MHz Intel HD Graphics. Up to 8GB of system memory supported on 2x 4GB DDR3L SODIMMs. Intel i211AT Gigabit Ethernet and High Definition Realtek ALC662 2.1 Channel HD Audio with 3W Speaker Amplifier. mSATA, PCI Express x1 and Mini PCI-E Slots. Daughterboard Expansion module can be added for additional LAN or Serial Ports.

Rear Panel Connectors: PS/2 Keyboard; PS/2 Mouse; VGA; RS232 Serial; RJ45 Gigabit LAN; 3x USB 2.0; 12V DC Input; HDMI; 1x USB 3.0; 1x 3.5mm Audio.

Jetway Daughterboard modules: The JNF9N uses the "Gen2" PCI-E based modules. Please select these from the "You may also require" area on the left.

Board Connectors: 1x 2pin 9-36V alternate power connector (cannot be used at the same time as the external DC input or ATX input); 20-pin ATX power connector (do not use with DC connected), 1x 4pin Power out (male, cable provided); 2x DDR3L SODIMM Socket; 1x PCI-Express x1; 1x Full Mini PCI-Express (Full and Half Length, no adapter required); 1x Full mSATA (shared with 1x SATA port); 2x SATA 3Gb/s; 1x RS232 Serial header (+5V/+12V); 4x USB 2.0 headers on 2x 9pin connectors; 1x Parallel Port header; 1x 24bit dual channel LVDS header/inverter (CHRONTEL CH7511B); 1x GPIO header; 3x Fan Headers; 1x 2pin LAN LED header; 1x 2pin S/PDIF header; 1x 4pin SMBUS header; 1x Front Panel Header; 1x Chassis Intrusion Header; 1x 9-pin Audio; 1x 4-pin Speaker Power header.

Powering this board: This board can be powered in one of three ways - The DC Power input on the rear of the board accepts a regulated 12V input through a standard 2.5/5.5mm socket. The Molex 5566-2 connector on the board can also accept a regulated 12V input. The ATX connector accepts a standard 20pin ATX connector. Any of our cases will work with this board. If using an enclosure such as the M350 or M5X, use one of our 12V AC Adapters to power the board at the rear and feed power to up to 2 other SATA devices through an on-board power output connector (cable provided).

Box contents: Motherboard, SATA cables, RS232 Connector to Header Cable, Y Power Cable, Product Manual, I/O Shield, Driver and Software CD.

*Note: The JNF9N supports up to 8GB DDR3L memory on 2x 4GB 1.35V DDR3L SODIMMs.This is not compatible with DDR, DDR2 or standard DDR3 SODIMM memory.

Specifications
Model Jetway JNF9N-2930
Processor Intel N2930 Quad Core, 1.83 GHz up to 2.16GHz
Architecture Bay Trail
Chipset Intel HM65
Cooling
Type Fanless
Connectors 1x Fan Connector
2x System Connector
Graphics
Outputs 1x HDMI
1x VGA
1x LVDS 1920x1200 max res.
Memory
Maximum 8GB
Sockets 2x SODIMM
Types DDR3/DDR3L 1600MHz, 1333MHz
Storage
Ports 2
2x Serial ATA 3Gb/s
1x mSATA (Shared with SATA port)
Network
LAN Ports 1
LAN 0: Intel i211-AT 1Gbps
USB
Connectors 8
Types 3x USB 2.0 Type A Rear
4x USB 2.0 on pin header Board Pins
1x USB 3.0 Type A Rear
Audio
Chipset Realtek ALC662 Supports 2 Channel audio
Connectors 1x 3.5mm Line Out
Expansion
PCI-Express 1x PCI Express x1
Mini PCI-Express 1x Mini PCI-E Full Length
Serial Ports
1x DB9 Serial COM port RS232
1x Serial Port on board header RS232
Other I/O Ports
PS/2 Keyboard Port
PS/2 Mouse Port
Power
DC-Jack 2.5/5.5mm connector
20-pin ATX power connector
Board Headers
HD Audio Header
Chassis Intrusion Header
Parallel Header
GPIO Header
Speaker Header
System Front Panel Header
Windows Support
Windows 7
Windows 10

Reckoner:


Search tools:

Board Finder
Case Finder
Mini PC Finder

Cards accepted:
Secure Shopping: