Dynatron K2 Side Blower Cooler suitable for 1U Chassis with Intel Socket LGA 1150, 1151, 1155, 1156 and 1200

Dynatron K2 Low Profile, 27.8mm High Side Blower Cooler with copper heatsink suitable for cooling Intel Socket LGA 1150, 1151, 1155, 1156 and 1200 motherboards in a 1U Chassis.

Long life two-ball bearing fan draws cool air though the fins and extracts hot air to one side to support chassis airflow. Pre-applied high performance GE-Toshiba TIG830SP thermal grease ensures clean and easy installation.

Case Compatibility: Side Blower design suitable for use in a 1U chassis. Tip: angle the K2 to force air out of the rear of the chassis.

Push Pins: Spring-loaded Push Pins securely lock heatsink to motherboard. It is not necessary to remove any components before fitting.

Compatible Boards and CPUs: Intel Socket 115X/1200 Motherboards fitted with a processor producing up to 125W CPU Heat Dissipation. Not to be equated directly to a CPU's Base Power or TDP figure as these understate heat output particularly in Turbo and Overclocked modes. CPU Turbo behaviour and fan speeds vs. temperature can be configured in a motherboard's BIOS.

Specifications: PWM controlled Fan speed: 1000 RPM (at 0-20% Duty Cycle); 2500 RPM (at 50%); 4000 RPM (at 100%); Airflow: 6 CFM (at 0-20%), 8.3 CFM (at 50%), 11.9 CFM (at 100%); Air Pressure: 2.21 mm-H2O (at 0-20%); 11.51 mm-H2O (at 50%); 23.6 mm-H2O (at 100%); Noise level: 21 dBA (at 0-20%), 37.8 dBA (at 50%), 44 dbA (at 100%); Power Consumption: 0.6 W (at 0-20%); 1.8 W (at 50%); 4.8 W (at 100%); Weight: 380g; Fan Dimensions: 75 x 75 x 15mm; Overall Dimensions: 82.6 x 81 x 27.8 (H) mm.