Suitable for Mini-ITX Cases with a spare PCI slot. Can also be used in standard CF slots of Travla C146/147/TE-1160 by unscrewing the PCI backplate.

This bootable Compact Flash to SATA Adapter can be used in any PC case with a spare PCI slot - the adapter fits in the PCI bay, and allows the connection of Compact Flash memory to your Mini-ITX board using a SATA data connector. Powered through a 4 pin Molex Floppy connector - please ensure your power supply has this connector available, or use an adapter cable.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small SATA hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Low profile Adapter suitable for Mini-ITX Cases with a spare low profile PCI slot (e.g. Jou Jye 528i).

This bootable Compact Flash to SATA Adapter can be used in any PC case with a spare PCI slot - the adapter fits in the PCI bay, and allows the connection of Compact Flash memory to your Mini-ITX board using a SATA data connector. Powered through a 4 pin Molex Floppy connector - please ensure your power supply has this connector available, or use an adapter cable.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small SATA hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for internal use in all cases with a spare 2.5in HDD bays.

This bootable Compact Flash to SATA Adapter can be used in any PC case with a 2.5in hard drive bay - the adapter has mounting holes in the same place as a 2.5in (laptop sized) hard drive. The adapter allows the connection of Compact Flash memory to your Mini-ITX board using standard SATA data and power connectors.

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for internal use in all cases, where space allows.

This bootable Compact Flash to SATA adapter allows the connection of Type I and II Compact Flash memory to your Mini-ITX board using a standard SATA data connector.Powered through a floppy style 0.1" connector. Supports both PIO mode (0 through 4) and DMA capable CF cards up to Ultra DMA150.

Card removal using the push button card ejector resets the SATA controller, allowing for hot swapping of CF cards. LEDs show CF card activity, SATA link and Reset status.

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for internal use in all cases, where space allows.

This bootable Compact Flash to IDE adapter allows the connection of Type I and Type II Compact Flash memory to your Mini-ITX board using both 44 pin IDE (2mm pitch) and standard 40 pin IDE (0.1" pitch) connectors. The adapters have an activity light and a push button ejector, can be jumpered for master or slave and are powered either through the 44 pin IDE connector or through the floppy style 0.1" connector when 40 pin cables are used.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for Mini-ITX Cases with 2.5in HDD bays (e.g. Morex 3677, 3688, Travla C134, C150, C159, Opus MPX, VoomPC Cases etc.).

This bootable Compact Flash to IDE Adapter can be used in any PC case with a 2.5in hard drive bay - the adapter has mounting holes in the same place as a 2.5in (laptop sized) hard drive. The adapter allows the connection of Compact Flash memory to your Mini-ITX board using both 44 pin IDE (2mm pitch) and standard 40 pin IDE (0.1" pitch) connectors.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for Mini-ITX Cases with 2.5in HDD bays (e.g. Morex 3677, 3688, Travla C134, C150, C159, Opus MPX, VoomPC Cases etc.).

This bootable Compact Flash to IDE Adapter can be used in any PC case with a 2.5in hard drive bay - the adapter has mounting holes in the same place as a 2.5in (laptop sized) hard drive. The adapter allows the connection of Compact Flash memory to your Mini-ITX board using a 44 pin IDE connector (this is the same connector as a 2.5in HDD cable).

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for Travla C137 or C158 Case.

This bootable Compact Flash to IDE Adapter is designed for use in the Travla C137 and C158 cases, and is easily fitted (the DC board is temporarily removed on the C137) - allowing access to the card through the front (C137) or side (C158) panels.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for Travla C146, C147, T1200 or C159 1U Rackmount Cases. If not in stock, select the PCI Slot Mounting Compact Flash Adapter below and unscrew the PCI backplate.

This bootable Compact Flash to IDE Adapter is designed for use in the Travla C146, C147 or C159 cases, and is easily fitted - allowing access to the card through the front panel. Allows the connection of Compact Flash memory to your Mini-ITX board using both 44 pin IDE (2mm pitch) and standard 40 pin IDE (0.1" pitch) connectors.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for Mini-ITX Cases with a spare PCI slot.

This bootable Compact Flash to IDE Adapter can be used in any PC case with a spare PCI slot - the adapter fits in the PCI bay, and allows the connection of Compact Flash memory to your Mini-ITX board using both 44 pin IDE (2mm pitch) and standard 40 pin IDE (0.1" pitch) connectors.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

Not all Compact Flash Cards are bootable. Suitable Compact Flash Cards available here.

Suitable for internal use in all cases, where space allows.

This bootable Compact Flash to IDE adapter allows the connection of Type I Compact Flash memory to your Mini-ITX board using a standard 40 pin IDE connectors. The adapters are powered through a standard floppy-sized Molex power connector.

Note: Compact Flash Cards are NOT hot-pluggable using these adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card!

2GB Compact Flash Cards with Industrial specifications designed to work in UDMA Fixed Disk Mode.

2GB Compact Flash Card suitable for use with a Travla case and optional Compact Flash Adapter, an M200 or M300 case with built in CF Adapter, or a standard Mini-ITX case and any of our compatible Compact Flash to IDE Adapters.

These cards are specially designed to meet the harsh demands of high-end industrial machines that run at extreme temperatures. The cards are exceptionally resistant to shock, vibration and dust, while consuming less power and maintaining ultra fast data transfer speeds.

Specifications: Data transfer rate: 25-40MB/sec (Max); works in Ultra DMA 4 / Fixed Disk Mode; measures 42.8mm x 36.4mm x 3.3mm, weighs 11.4g; 3.3V/5V operating voltage; -40°C (-40°F) to 85°C (185°F) operating temperature; Endurance: 2,000,000 program/erase cycles; MTBF: 1,000,000 hours; Durability: 10,000 insertion/removal cycles.

Note: Compact Flash Cards are NOT hot-pluggable using Compact Flash to IDE adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card! The EPIA MII board currently only support booting with Compact Flash using Embedded Linux or Windows CE.

Huge 100x 4GB Industrial Compact Flash Cards designed to work in UDMA Fixed Disk Mode.

4GB Compact Flash Card suitable for use with a Travla case and optional Compact Flash Adapter, an M200 or M300 case with built in CF Adapter, or a standard Mini-ITX case and any of our compatible Compact Flash to IDE Adapters.

These cards are specially designed to meet the harsh demands of high-end industrial machines that run at extreme temperatures. The cards are exceptionally resistant to shock, vibration and dust, while consuming less power and maintaining ultra fast data transfer speeds.

Specifications: Data transfer rate: 25-40MB/sec (Max); works in Ultra DMA 4 / Fixed Disk Mode; measures 42.8mm x 36.4mm x 3.3mm, weighs 11.4g; 3.3V/5V operating voltage; -40°C (-40°F) to 85°C (185°F) operating temperature; Endurance: 2,000,000 program/erase cycles; MTBF: 1,000,000 hours; Durability: 10,000 insertion/removal cycles.

Note: Compact Flash Cards are NOT hot-pluggable using Compact Flash to IDE adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card! The EPIA MII board currently only support booting with Compact Flash using Embedded Linux or Windows CE.

Enormous 8GB Compact Flash Cards with Industrial specifications designed to work in UDMA Fixed Disk Mode.

8GB Compact Flash Card suitable for use with a Travla case and optional Compact Flash Adapter, an M200 or M300 case with built in CF Adapter, or a standard Mini-ITX case and any of our compatible Compact Flash to IDE Adapters.

These cards are specially designed to meet the harsh demands of high-end industrial machines that run at extreme temperatures. The cards are exceptionally resistant to shock, vibration and dust, while consuming less power and maintaining ultra fast data transfer speeds.

Specifications: Data transfer rate: 25-40MB/sec (Max); works in Ultra DMA 4 / Fixed Disk Mode; measures 42.8mm x 36.4mm x 3.3mm, weighs 11.4g; 3.3V/5V operating voltage; -40°C (-40°F) to 85°C (185°F) operating temperature; Endurance: 2,000,000 program/erase cycles; MTBF: 1,000,000 hours; Durability: 10,000 insertion/removal cycles.

Note: Compact Flash Cards are NOT hot-pluggable using Compact Flash to IDE adapters. They become small IDE hard drives. Switch off your machine to plug or unplug, or you will destroy your card! The EPIA MII board currently only support booting with Compact Flash using Embedded Linux or Windows CE.

Industrial quality flash memory plugs directly into the IDE interface and acts as a hard drive, reducing size and noise levels in your Mini-ITX project.

Bootable 1GB Flash Memory (Disk On Module) suitable for all Mini-ITX motherboards, and all operating systems. Plugs directly into the IDE interface of your board, powered directly from the IDE interface, or through a 4 pin Molex connector on a 6 inch flylead (3.3V / 5V operation). Dimensions: 59.0mm x 27.3mm x 7.3mm. Fits any Mini-ITX case.

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

Industrial quality flash memory plugs directly into the IDE interface and acts as a hard drive, reducing size and noise levels in your Mini-ITX project.

Bootable 2GB Flash Memory (Disk On Module) suitable for all Mini-ITX motherboards, and all operating systems. Plugs directly into the IDE interface of your board, powered directly from the IDE interface, or through a 4 pin Molex connector on a 6 inch flylead (3.3V / 5V operation). Dimensions: 59.0mm x 27.3mm x 7.3mm. Fits any Mini-ITX case.

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

Industrial quality flash memory plugs directly into the IDE interface and acts as a hard drive, reducing size and noise levels in your Mini-ITX project.

Bootable 4GB Flash Memory (Disk On Module) suitable for all Mini-ITX motherboards, and all operating systems. Plugs directly into the IDE interface of your board, powered directly from the IDE interface, or through a 4 pin Molex connector on a 6 inch flylead (3.3V / 5V operation). Dimensions: 59.0mm x 27.3mm x 7.3mm. Fits any Mini-ITX case.

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

Industrial quality flash memory plugs directly into the IDE interface and acts as a hard drive, reducing size and noise levels in your Mini-ITX project.

Bootable 8GB Flash Memory (Disk On Module) suitable for all Mini-ITX motherboards, and all operating systems. Plugs directly into the IDE interface of your board, powered directly from the IDE interface, or through a 4 pin Molex connector on a 6 inch flylead (3.3V / 5V operation). Dimensions: 59.0mm x 27.3mm x 7.3mm. Fits any Mini-ITX case.

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

Industrial quality flash memory plugs directly into a 44pin IDE interface and acts as a hard drive, reducing size and noise levels in your project.

Bootable 1GB Flash Memory (Disk On Module) suitable for motherboards only with 44pin IDE interfaces (e.g. our M82G Thin Clients, the ARTiGO A1100 and some EPIA PX Motherboards), and all operating systems. Plugs directly into the 44pin IDE interface of your board, powered directly from the IDE interface. Dimensions: 59.0mm x 27.3mm x 7.3mm.

Important Compatibility Note: This module has a 44pin IDE interface, and will connect only to boards with 44pin IDE connectors (currently the EPIA PX on this website).

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times.

Industrial quality flash memory plugs directly into a 44pin IDE interface and acts as a hard drive, reducing size and noise levels in your project.

Bootable 2GB Flash Memory (Disk On Module) suitable for motherboards only with 44pin IDE interfaces (e.g. our M82G Thin Clients, the ARTiGO A1100 and some EPIA PX Motherboards), and all operating systems. Plugs directly into the 44pin IDE interface of your board, powered directly from the IDE interface. Dimensions: 59.0mm x 27.3mm x 7.3mm.

Important Compatibility Note: This module has a 44pin IDE interface, and will connect only to boards with 44pin IDE connectors (currently the EPIA PX on this website).

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

Industrial quality flash memory plugs directly into a 44pin IDE interface and acts as a hard drive, reducing size and noise levels in your project.

Bootable 4GB Flash Memory (Disk On Module) suitable for motherboards only with 44pin IDE interfaces (e.g. our M82G Thin Clients, the ARTiGO A1100 and some EPIA PX Motherboards), and all operating systems. Plugs directly into the 44pin IDE interface of your board, powered directly from the IDE interface. Dimensions: 59.0mm x 27.3mm x 7.3mm.

Important Compatibility Note: This module has a 44pin IDE interface, and will connect only to boards with 44pin IDE connectors (currently the EPIA PX on this website).

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

Industrial quality flash memory plugs directly into a 44pin IDE interface and acts as a hard drive, reducing size and noise levels in your project.

Bootable 8GB Flash Memory (Disk On Module) suitable for motherboards only with 44pin IDE interfaces (e.g. our M82G Thin Clients, the ARTiGO A1100 and some EPIA PX Motherboards), and all operating systems. Plugs directly into the 44pin IDE interface of your board, powered directly from the IDE interface. Dimensions: 59.0mm x 27.3mm x 7.3mm.

Important Compatibility Note: This module has a 44pin IDE interface, and will connect only to boards with 44pin IDE connectors (currently the EPIA PX on this website).

Specifications: Operating Temperature: 0°C - 70°C; Endurance: 2,000,000 Program/Erase cycles; MTBF: 1,000,000 hours; Durability of Connector: 10,000 times

16GB 2.5in IDE Solid State Disk, with standard laptop 44pin IDE interface. If not in stock this drive will be ordered specially for you.

RoHS compliant. Fully compatible with devices that support the IDE standard. Non-volatile Flash Memory. Lower Power Consumption. Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable data transfers. Supports up to Ultra DMA Mode 4. Shock resistant.

If your enclosure and motherboard supports SATA, we recommend the faster SATA SSD drives.

You may require a 2.5in to 3.5in IDE cable.

Specifications: Dimensions : 100.2 x 69.85 x 7.40mm; Weight: 80g; Operating Temperature: 0°C - 70°C; Read speed up to 30MB/s, Write speed up to 22MB/s (with UDMA Mode4).

32GB 2.5in IDE Solid State Disk, with standard laptop 44pin IDE interface. If not in stock this drive will be ordered specially for you.

RoHS compliant. Fully compatible with devices that support the IDE standard. Non-volatile Flash Memory. Lower Power Consumption. Built-in ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable data transfers. Supports up to Ultra DMA Mode 4. Shock resistant.

If your enclosure and motherboard supports SATA, we recommend the fasterSATA SSD drives.

You may require a 2.5in to 3.5in IDE cable.

Specifications: Dimensions : 100.2 x 69.85 x 7.40mm; Weight: 80g; Operating Temperature: 0°C - 70°C; Read speed up to 25MB/s, Write speed up to 8MB/s (with UDMA Mode4).

Extremely fast 32GB 2.5in SATA / SATA II Solid State Disk. If not in stock this drive will be ordered specially for you.

OCZ Onyx Series SSD drives deliver up to 125 MB/s and 70 MB/s read/write speeds and seek times of less than 0.1ms, making them up to 10x as fast on a seek-time basis and over 50% faster on a R/W basis that the best performing 2.5in HDDs on the market, all while consuming 50% less power.

The drives feature a durable yet lightweight alloy housing, and because they have no moving parts, the drives are not prone to damage from common mishandling. Designed for ultimate reliability, these SSDs have an excellent 1.5 million hour mean time before failure (MTBF).

Specifications: Dimensions : 99.8 x 69.63 x 9.3mm; Weight: 81g; Shock Resistant 1500G; MTBF: 1.5 million hours; Read speed up to 125 MB/sec; Write speed up to 70 MB/sec; Seek speed < 0.1ms; Operating Temp: 0C ~ +70C; Storage Temp: -45C ~ +85C; RAID and TRIM support.

High performance 40GB 2.5in SATA / SATA II Solid State Disk. If not in stock this drive will be ordered specially for you.

Intel X25-V Series 40GB SSD drives deliver up to an incredible 170 MB/s and 35 MB/s read/write speeds, making them up to 10x as fast on a seek-time basis and over 50% faster on a R/W basis that the best performing 2.5in HDDs on the market, all while consuming 50% less power.

Extremely fast 80GB 2.5in SATA / SATA II Solid State Disk. If not in stock this drive will be ordered specially for you.

Intel X25-M G2 Series 80GB SSD drives deliver up to an incredible 250 MB/s and 70 MB/s read/write speeds, making them up to 10x as fast on a seek-time basis and over 50% faster on a R/W basis that the best performing 2.5in HDDs on the market, all while consuming 50% less power.

Extremely fast 160GB 2.5in SATA / SATA II Solid State Disk. If not in stock this drive will be ordered specially for you.

Intel X25-M G2 Series 160GB SSD drives deliver up to an incredible 250 MB/s and 70 MB/s read/write speeds, making them up to 10x as fast on a seek-time basis and over 50% faster on a R/W basis that the best performing 2.5in HDDs on the market, all while consuming 50% less power.