2-Bay NAS Chassis suitable for all Mini-ITX motherboards. Featuring brushed-steel effect panels and high-gloss front, this case provides 2x hot-swap 3.5in SATA drive bays. One full-height PCI or PCI-Express slot is also available.

Bays: 2x 3.5in Hot-Swap Caddies; 1x 5.25in Optical Drive Bay; 1x Internal 3.5in/2.5in HDD/SSD Bay. 1x PCI or PCI-Express card.

Cooling: 80mm Illuminated Front Fan, 2x 50mm x 20mm Rear Fans.

Front Panel: 2x USB; 1x Power Button; Power and Storage LEDs; 1x Headphone; 1x Microphone.

Power supply: Internal 230/240V 300W SFX PSU with 80mm cooling fan. The UK power cord provided as standard. Power connectors: 1x 20/24pin ATX; 1x 12V P4; 2x Molex HDD; 4x SATA Power.

Measurements: 200mm (W) x 212mm (H) x 344mm (D) (7.9in x 8.3in x 13.5in).
Volume: 14.6 litres

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Intel Socket Mini-ITX boards with standard retail heatsinks, or AMD Socket Mini-ITX boards with low profile heatsinks (recent AMD heatsinks are lower).

Full case comparison chart

2-Bay Mini-ITX/NAS Chassis suitable for all Mini-ITX motherboards. Featuring brushed-steel effect panels and high-gloss front, this case provides 2x hot-swap 3.5in SATA drive bays. One double-width full-height PCI or PCI-Express slot is also available which combined with the 80 Plus 400W PSU makes this case an ideal choice for a Mini-ITX powered gaming PC.

Bays: 2x 3.5in (or 2.5in) Hot-Swap Caddies; 1x 5.25in Optical Drive Bay; 1x Internal 3.5in HDD Bay (alternatively supports 2.5in HDD/SSD). 1x PCI or PCI-Express card.

Cooling: 120mm Illuminated (Blue) Front Fan, 1x 80mm Rear Fan.

Front Panel Controls: 1x Power Button; Power LED, HDD LED; 1x Headphone; 1x Microphone; 2x USB 2.0/3.0 (connects directly to motherboard back panel USB through cable egress point at rear of case).

Power supply: Internal 400W SFX 80 Plus Bronze PSU with 80mm cooling fan. UK power cord provided as standard. Power connectors: 1x 24pin ATX; 2x P4 12V; 1x 6pin PCI-Express 12V; 1x 2pin 12V; 2x Molex HDD; 5x SATA Power.

Building Tip: Gently push plastic optical drive bay blanking plate from rear with long screwdriver to remove plate. Connect optical drive power/data cables before sliding back into the tray.

Measurements: 214mm (W) x 219mm (H) x 348mm (D) (8.4in x 8.6in x 13.7in).
Volume: 16.31 litres

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Intel Socket Mini-ITX boards with standard retail heatsinks, or AMD Socket Mini-ITX boards with low profile heatsinks (recent AMD heatsinks are lower).

Full case comparison chart

Versatile and stylish case with 2 removable 3.5in drive bays and 1 internal 2.5in bay. Suitable for a Home Server or NAS Chassis - Universal 110-240V Operation.

Metallic black coating. ABS-HB plastic sliding front panel. Removable motherboard carrier for excellent thermal performance and ease of cabling. 70mm fans on rear and 60mm fan on front. Kensington lock supported.

Drive Bays: 2x removable 3.5in SATA/SATA II Hard Drive bays (SAS/SATAII compatible, hot swappable - if supported by motherboard); 1x 2.5in SSD/HDD bay.

Front Panel: Power, Reset switches; 8x LEDs (Power, Boot, LAN, 5x HDD Activity); 2x USB 2.0.

Power supply: 150W Universal 110/240V Flex ATX PSU (FSP150-50LE), US Power Cord.

Measurements: 260(H) x 140(W) x 260(D) (10.2 x 5.5 x 10.2in)
Volume: 9.46 litres.

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Recommended software: Openfiler or Windows Home Server.

Full case comparison chart

The Travla T1220 1U Rackmount Mini-ITX Case supports 2x Mini-ITX Motherboards, 2x Internal 2.5in HDDs/SSDs and 2x Lockable Hot Swap Removable 3.5in SATA HDD Caddies.

Construction:: Lightweight Aluminium alloy and heavy duty cold-rolled steel, finished in black textured paint.

Front Panel: 2x Drive Caddies; 2x Power Switch; 2x HDD & 2x Power LEDs; 4x USB 2.0.

Drive Bays: 2x Internal 2.5in HDD Bays and 2x Lockable Hot Swap Removable 3.5in SATA HDD Caddies shared between both boards.

Back Panel: 2x Patented nickel-plated plastic Universal I/O shields included.

Measurements: 43.9(H) x 407.8(W) x 482.6(D) (1.73 x 19 x 16.06in)
Volume: 8.64 litres.

Power Supply: 2x Internal Universal Auto-Switching 110-240V 250W Flex ATX PSUs with fan. UK Plugs provided as standard.

Cooling: 4x 40x40mm system fans are included.

PCI Cards: No PCI Cards are supported due to lack of space.

Supported boards: Embedded Mini-ITX boards with ATX connectors and standard height heatsinks e.g. D2500HN, JNC9KDL, D425KT, D525MW, D410PT, D510MO, later model D945GCLF, D945GCLF2; Jetway Atom & J7F2/4K/5M; Zotac ION-ITX-B/C, Fusion Boards; VIA EPIA Boards; Socket Mini-ITX boards fitted with suitable <30mm 1U heatsink such as Dynatron K2.

Boards not supported: Any Mini-ITX boards with larger than normal heatsink size will not physically fit, e.g. EPIA MII, Zotac ION A/D/F/P; Socket motherboards with standard heatsinks.

Full case comparison, size and board compatibility chart

This solidly constructed steel chassis has 4 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. A further 2.5" bay is available internally. Full height PCI/PCI-Express cards are supported.

Bays: 4x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies; 1x Internal 2.5in drive bay (needs additional power cable).

Cooling: 1x 120mm Rear Fan (quiet).

Front Panel: 2x USB 2.0 Sockets; Power Button; Reset Button; Power and Storage Activity LEDs; Each Drive Caddy has Power and Activity Indicators.

Power supply: Internal 200 Watt AC Adapter with quiet 40mm Fan. UK power cord provided as standard. Power connectors: 1x 20/24pin ATX; 1x 12v P4; 2x Molex (to power the 4x drive bays).

Fitting 5 drives: To power a 2.5in drive (usually as a boot drive) use the provided Female Molex to Male Molex & SATA splitter cable inline with a power connector fitting to one of the SATA backplanes. These Molex connectors are tight - but can be removed with care (tip: remove the bottom 2 HDD trays and unscrew the backplane from the front, remove the backplane and gently wiggle till the connector releases).

Measurements: 200mm (W) x 250mm (H) x 298mm (D) (7.9in x 9.84in x 11.73in).
Volume: 14.9 litres

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Full case comparison chart

This solidly constructed steel chassis has 4 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. A further 2.5" bay is available internally. Full height PCI/PCI-Express cards are supported.

The A7979 is functionally identical to the A7879 apart from a different front panel design.

Bays: 4x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies; 1x Internal 2.5in drive bay (needs additional power cable).

Cooling: 1x 120mm Rear Fan (quiet).

Front Panel: Power Button; Power LED; Each Drive Caddy has Power and Activity Indicators.

Power supply: Internal 200 Watt AC Adapter with quiet 40mm Fan. UK power cord provided as standard. Power connectors: 1x 20/24pin ATX; 1x 12v P4; 2x Molex (to power the 4x drive bays).

Fitting 5 drives: To power a 2.5in drive (usually as a boot drive) use the provided Female Molex to Male Molex & SATA splitter cable inline with a power connector fitting to one of the SATA backplanes. These Molex connectors are tight - but can be removed with care (tip: remove the bottom 2 HDD trays and unscrew the backplane from the front, remove the backplane and gently wiggle till the connector releases).

Measurements: 200mm (W) x 250mm (H) x 298mm (D) (7.9in x 9.84in x 11.73in).
Volume: 14.9 litres

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Full case comparison chart

This solidly constructed steel chassis has 4 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. A further 2.5" bay is available internally. Full height PCI/PCI-Express cards are supported.

Bays: 4x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies; 1x Internal 2.5in drive bay (needs additional power cable).

Cooling: 1x 120mm Rear Fan (quiet).

Front Panel: 2x USB 3.0 Sockets (requires motherboard with 19pin USB 3.0 header); Power Button; Reset Button; Power and Storage Activity LEDs; Each Drive Caddy has Power and Activity Indicators.

Power supply: Internal 200 Watt AC Adapter with quiet 40mm Fan. UK power cord provided as standard. Power connectors: 1x 20/24pin ATX; 1x 12v P4; 2x Molex (to power the 4x drive bays).

Fitting 5 drives: To power a 2.5in drive (usually as a boot drive) use the provided Female Molex to Male Molex & SATA splitter cable inline with a power connector fitting to one of the SATA backplanes. These Molex connectors are tight - but can be removed with care (tip: remove the bottom 2 HDD trays and unscrew the backplane from the front, remove the backplane and gently wiggle till the connector releases).

Measurements: 200mm (W) x 250mm (H) x 298mm (D) (7.9in x 9.84in x 11.73in).
Volume: 14.9 litres

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Full case comparison chart

19in Rackmount 1U Mini-ITX enclosure supporting up to 4x 3.5in removable SATA HDDs, Slimline Optical and 2x 2.5in internal IDE/SATA HDDs.

Construction: Heavy duty cold-rolled steel. Black wet paint with texture coat.

Front Panel: Power Switch; HDD & Power LEDs; 2x 3.5mm Audio Sockets; Pop-out for DB9 Serial Port (Serial Port Header Cable included); 2x USB 2.0.

Drive Bays: Slimline Optical Drive in front panel; Pop-out for Compact Flash in front panel (requires Compact Flash Adapter); 4x Removable SATA HDD Trays; 2x 2.5in IDE/SATA HDD Brackets.

Back Panel: 2x PCI Slots; Patented nickel-plated plastic Universal I/O shield included.

Measurements: 44.45(H) x 482.6(W) x 381(D) (1.75 x 19 x 15in)
Volume: 8.17 litres.

Power Supply: Internal Universal Auto-Switching 110-240V 250W Flex ATX PSU with fan. UK Plug provided as standard.

Cooling: 2x 40x20mm 6.28CFM blower fans are included.

Supported boards*: Embedded Mini-ITX boards with ATX connectors and standard height heatsinks e.g. D2500HN, JNC9KDL, D425KT, D525MW, D410PT, D510MO, later model D945GCLF, D945GCLF2; Jetway Atom & J7F2/4K/5M; Zotac ION-ITX-B/C, Fusion Boards; VIA EPIA Boards; Socket Mini-ITX boards fitted with suitable <30mm 1U heatsink such as Dynatron K2.

Boards not supported: Boards with extended height heatsinks including: Early model Intel D945GCLF, Zotac ION-ITX-A/D/F; Socket Mini-ITX boards without 1U heatsinks fitted.

PCI and PCI Express Support: No Riser Card is included. Solid PCI and PCI-Express x16 riser cards optionally available - please select as required from the menu on the left. For Single PCI use the top slot of the Dual PCI card. Dual PCI is supported only with a subset of card types and motherboards. Lower slot can also be used for a bracket for additional outputs, such as serial ports fitted to PCI backplates.

*Compact Flash Support: An IDE or SATA Compact Flash Adapter can be fitted in the enclosure, with front access. Tip: remove the metal backplate before fitting.

*Front mounted Serial and USB 2.0 port compatibility: EPIA CN and SN have non-standard serial port headers (see board descriptions). EPIA 5000 and 800 have USB 1.1 ports. Not all boards have serial port headers (check board notes)

Full case comparison, size and board compatibility chart

The Travla T2140 2U Rackmount Short-Depth (<29cm) Mini-ITX Case supports a Mini-ITX Motherboard with a standard full size heatsink fitted, 1x Internal 2.5in HDDs/SSD, 1x Slimline Optical Drive and 4x Lockable Hot Swap Removable 3.5in SATA HDD Caddies in a 284mm (11.18in) short-depth format..

Construction:: Lightweight Aluminium alloy and heavy duty cold-rolled steel, finished in black textured paint.

Front Panel: 4x 2.5in/3.5in SATA Drive Caddies; Slimline Optical Drive Bay; 2x USB 2.0; 2x Power Switch; HDD & Power LEDs; Fan Filter Cover with thumbscrews.

Drive Bays: 1x Internal 2.5in HDD/SSD Bay, 1x Slimline Optical Drive Bay, 4x Lockable Hot Swap Removable 3.5in SATA HDD Caddies.

Back Panel: 2x Patented nickel-plated plastic Universal I/O shields included.

Measurements: 88(H) x 482.6(W) x 284(D) (3.46 x 19 x 11.18in)
Volume: 12.06 litres.

Power Supply: 1x Internal Universal Auto-Switching 110-240V 250W Flex ATX PSU with fan. UK Plugs provided as standard.

Cooling: 2x 80x80mm system fans are included.

*PCI/PCI Express Cards: Full height cards supported, mounted over the motherboard. Please select PCI or PCI-Express riser as required from the menu on the left.

Supported boards: All Mini-ITX boards, including socket motherboards with standard heatsinks fitted.

Full case comparison, size and board compatibility chart

The Travla T2240 2U Rackmount Mini-ITX Case supports 2x Mini-ITX Motherboards, 2x Internal 2.5/3.5in HDDs/SSDs and 4x Lockable Hot Swap Removable 3.5in SATA HDD Caddies.

Construction:: Lightweight Aluminium alloy and heavy duty cold-rolled steel, finished in black textured paint.

Front Panel: 4x Drive Caddies; 2x Power Switch; 2x HDD & 2x Power LEDs; 4x USB 2.0; Case Cover Lock; 2x Fan Filter Covers with thumbscrews; 2x pop-outs for optional Compact Flash Adapters.

Drive Bays: 2x Internal 2.5/3.5in HDD Bays and 4x Lockable Hot Swap Removable 3.5in SATA HDD Caddies shared between both boards in any configuration.

Back Panel: 2x Patented nickel-plated plastic Universal I/O shields included.

Measurements: 88(H) x 446(W) x 482.6(D) (3.46 x 17.5 x 19in)
Volume: 18.94 litres.

Power Supply: 2x Internal Universal Auto-Switching 110-240V 250W Flex ATX PSUs with fan. UK Plugs provided as standard.

Cooling: 4x 80x80mm system fans are included.

*PCI/PCI Express Cards: Full height cards supported, mounted over the motherboard. Please select PCI or PCI-Express riser(s) as required from the menu on the left.

Supported boards: All Mini-ITX boards, including socket motherboards with standard heatsinks fitted (use low profile socket heatsinks if PCI/PCI Express bay in use).

Full case comparison, size and board compatibility chart

The Travla T2241 2U Rackmount Mini-ITX Case supports 2x Mini-ITX Motherboards, 2x Internal 2.5/3.5in HDDs/SSDs and 4x Lockable Hot Swap Removable 3.5in SATA HDD Caddies.

Construction:: Lightweight Aluminium alloy and heavy duty cold-rolled steel, finished in black textured paint.

Front Panel: 4x Drive Caddies; 2x Power Switch; 2x HDD & 2x Power LEDs; 4x USB 2.0; Case Cover Lock; 2x Fan Filter Covers with thumbscrews; 2x pop-outs for optional Compact Flash Adapters.

Drive Bays: 2x Internal 2.5/3.5in HDD Bays and 4x Lockable Hot Swap Removable 3.5in SATA HDD Caddies shared between both boards in any configuration.

Back Panel: 2x Patented nickel-plated plastic Universal I/O shields included.

Measurements: 88(H) x 446(W) x 482.6(D) (3.46 x 17.5 x 19in)
Volume: 18.94 litres.

Power Supply: 2x Internal Universal Auto-Switching 110-240V 250W Flex ATX PSUs with fan. UK Plugs provided as standard.

Cooling: 4x 80x80mm system fans are included.

PCI/PCI Express Cards: Low-Profile cards supported, fitted directly to the motherboard.

Supported boards: All Mini-ITX boards, including socket motherboards with standard heatsinks fitted (use low profile socket heatsinks if PCI/PCI Express bay in use).

Full case comparison, size and board compatibility chart

This solidly constructed Steel and Acrylic chassis has 5 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. Full height PCI or PCI-Express cards are supported.

Bays: 5x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies.

Cooling: 1x 80mm Rear Fan.

Front Panel: Power Button; Reset Button; Power and Storage Activity LEDs; Each Drive Caddy has Power and Activity Indicators.

Power supply: Internal 300 Watt AC Adapter with 40mm internal fan. UK power cord provided as standard. Power connectors: 1x 24pin ATX; 1x 4pin 12v P4; 1x 4pin to extend P4 to P8; 1x 2pin to extend P4 to P6; 1x 6pin PCI-E; 3x additional SATA (SATA backplanes powered by AC Adapter).

Measurements: 200mm (W) x 250mm (H) x 300mm (D) (7.9in x 9.84in x 11.81in).
Volume: 15 litres

Supported boards: Boards with 24pin ATX connectors; All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Full case comparison chart

This solidly constructed Steel and Acrylic chassis has 5 individually lockable hot-swap/removable drive bays suitable for either 2.5in or 3.5in hard drives. Full height PCI or PCI-Express cards are supported.

Bays: 5x 2.5/3.5in SATA HDD/SDD in Lockable Hot-Swap/Removable Caddies.

Cooling: 1x 80mm Rear Fan.

Front Panel: Power Button; Reset Button; Power and Storage Activity LEDs; Each Drive Caddy has Power and Activity Indicators.

Power supply: Internal 400 Watt AC Adapter with quiet 40mm Fan. UK power cord provided as standard. Power connectors: 1x 24pin ATX; 1x 4pin 12v P4; 1x 4pin to extend P4 to P8; 1x 2pin to extend P4 to P6; 1x 6pin PCI-E; 3x additional SATA (SATA backplanes powered by AC Adapter).

Measurements: 200mm (W) x 250mm (H) x 300mm (D) (7.9in x 9.84in x 11.81in).
Volume: 15 litres

Supported boards: Boards with 24pin ATX connectors; All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Full case comparison chart

The Travla T2280 2U Rackmount Mini-ITX Case supports 2x Mini-ITX Motherboards, 2x Internal 2.5/3.5in HDDs/SSDs and 8x Lockable Hot Swap Removable 3.5in SATA HDD Caddies.

Construction:: Lightweight Aluminium alloy and heavy duty cold-rolled steel, finished in black textured paint.

Front Panel: 8x Drive Caddies; 2x Power Switch; 2x HDD & 2x Power LEDs; 4x USB 2.0.

Drive Bays: 2x Internal 2.5/3.5in HDD Bays and 8x Lockable Hot Swap Removable 3.5in SATA HDD Caddies shared between both boards in any configuration.

Back Panel: Compatible with standard ATX/Mini-ITX I/O shields.

Measurements: 88(H) x 446(W) x 482.6(D) (3.46 x 17.5 x 19in)
Volume: 18.94 litres.

Power Supply: 2x Internal Universal Auto-Switching 110-240V 250W Flex ATX PSUs with fan. UK Plugs provided as standard.

Cooling: 4x 80x80mm system fans are included.

PCI and PCI Express Support: No Riser Cards are included. Solid PCI and PCI-Express x16 riser cards optionally available mount above the motherboard - please select riser as required from the menu on the left (you may need 2 risers if you have 2 motherboards).

Supported boards: All Mini-ITX boards, including socket motherboards with standard heatsinks fitted (use low profile socket heatsinks if PCI/PCI Express bay in use).

Full case comparison, size and board compatibility chart

The Travla T2281 2U Rackmount Mini-ITX Case supports 2x Mini-ITX Motherboards, 2x Internal 2.5/3.5in HDDs/SSDs and 8x Lockable Hot Swap Removable 3.5in SATA HDD Caddies.

Construction:: Lightweight Aluminium alloy and heavy duty cold-rolled steel, finished in black textured paint.

Front Panel: 8x Drive Caddies; 2x Power Switch; 2x HDD & 2x Power LEDs; 4x USB 2.0.

Drive Bays: 2x Internal 2.5/3.5in HDD Bays and 8x Lockable Hot Swap Removable 3.5in SATA HDD Caddies shared between both boards in any configuration.

Back Panel: Compatible with standard Mini-ITX I/O shields.

Measurements: 88(H) x 446(W) x 482.6(D) (3.46 x 17.5 x 19in)
Volume: 18.94 litres.

Power Supply: 2x Internal Universal Auto-Switching 110-240V 250W Flex ATX PSUs with fan. UK Plugs provided as standard.

Cooling: 2x 80x80mm system fans are included.

PCI/PCI Express Cards: Low-Profile cards supported, directly fitted to the motherboard.

Supported boards: All Mini-ITX boards, including socket motherboards with standard heatsinks fitted.

Full case comparison, size and board compatibility chart

Versatile 'cube' style case supporting 3x 3.5in HDDs or 4x 2.5in HDD/SSDs and various combinations in between. Suitable for all Mini-ITX motherboards. Constructed from a steel alloy frame with polymer front mesh panel.

Power supply not included: We have a selection of ATX power supplies available to use with this case.

Front Panel: Power Button with Blue Power LED. Full Mesh on the front panel for optimised cooling.

Side Panel: Reset Button, 2x USB 3.0 (requires USB 3.0 header on motherboard), 3.5mm Mic-In, 3.5mm Audio-Out.

Drive Bays: Multiple drives supported in the following combinations:

• 3x 3.5in HDD
• 2x 3.5in HDD & 2x 2.5in HDD/SSD
• 1x 3.5in HDD & 3x 2.5in HDD/SSD
• 4x 2.5in HDD/SSD

PCI/PCI-Express Expansion: PCI or PCI-Express card up to 210mm (8.3 in) in depth supported in double width bay.

Cooling: 120mm Fan installed in front panel (120mm radiator or 140mm fan supported). 2x 80x25mm fans supported in side of chassis (not included).

CPU Cooler Height: CPU cooler up to 76mm (3 in) in height supported.

Measurements: 260(W) x 280(D) x 208(H)mm (10.3 x 8.2 x 11.1 in). Weight 2.65 Kg. Volume 15.14 Litres.

Power Supplies Supported: ATX Power Supply up to 180mm (7.1 in) without cable management supported, or 142mm (5.6 in) with full cable management.

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Intel and AMD Socket Mini-ITX boards with standard retail heatsinks, or 3rd party heatsinks up to 76mm in height.

Versatile and stylish case with 2 removable 3.5in drive bays and 1 internal 2.5in bay. Suitable for a Home Server or NAS Chassis - Universal 110-240V Operation.

Metallic black coating. ABS-HB plastic front panel. Removable motherboard carrier for excellent thermal performance and ease of cabling. 70mm fans on rear and 60mm fan on front. Kensington lock supported.

Bays: 2x removable 3.5in SATA/SATA II Hard Drive bays (SAS/SATAII compatible, cold swappable); 1x 2.5in SSD/HDD bay.

Front Panel: Power, Reset switches; 8x LEDs (Power, Boot, LAN, 5x HDD Activity); 2x USB 2.0.

Power supply: 150W Universal 110/240V Flex ATX PSU (FSP150-50LE), US Power Cord.

Measurements: 260(H) x 140(W) x 260(D) (10.2 x 5.5 x 10.2in)
Volume: 9.46 litres.

Supported boards: All Embedded (e.g. Atom, Celeron Bay Trail) Mini-ITX boards with ATX connectors; Socket Mini-ITX boards *only* with suitable low profile heatsink fitted such as Akasa 7106HP or K25 (Retail 35W TDP Intel CPUs come with suitable low profile heatsinks).

Recommended software: Openfiler or Windows Home Server.

Full case comparison chart

The Node 304 has room for up to 6 hard drives, can take full size ATX PSUs and fit long graphic cards. The chassis features is equipped with three hydraulic bearing fans, easy-to-clean air filters in all intakes, two front USB 3.0 ports and a stunning and functional Scandinavian design. The Node 304 can be used as the basis for a cool-running file server, a stylish and quiet home theatre PC or a powerful gaming system.

Bays: Supports up to 6 drives: 3x Hard Drive Mounting Brackets can each support 2x 3.5in HDD or 2.5in HDD/SSD.

Cooling: 3x Silent Series R2 hydraulic bearing fans included (2x 92mm up to 1300 RPM in front panel, 1x 140mm up to 1000 RPM in rear of case). Integrated 3 position fan controller. Front Fan Filter. PSU Air Intake Filter (underneath chassis). GPU Air Intake Filter.

Front Panel: Aluminium front panel with Blue Power/HDD LED.

Side of Front Panel: 2x 3.5mm Audio (Mic and Headphone); 2x USB 3.0 (Internal 3.0 to 2.0 adapter included); Power Button.

Rear Panel: 3 way Fan Controller Switch, C14 Power Cable Socket (connects to ATX PSU with internal extension cable).

Power Supply not included: Requires an ATX PSU, up to 160mm in length (To fit in combination with a long graphics card, PSUs with modular connectors on the back typically need to be shorter than 160mm). The Fractal Design Integra M ATX PSUs we stock are ideally suited at 140mm in length.

Graphics Card support: Graphics cards, up to 310mm in length, when 1 Hard Drive Mounting Bracket is removed. Graphics cards longer than 170 mm will conflict with PSUs longer than 160mm. Please check your graphics card and power supply connectors as an adapter cable may be required.

Measurements (W x H x D): 250 x 210 x 374mm (9.84in x 8.23in x 14.72in). Volume: 19.63 litres

Supported boards: Not recommended: Gigabyte GA-H170N-WIFI and GA-Z170N-WIFI. Both these boards have a sideways mounting SATA position close to the power supply position which can cause problems with SATA cabling. All other Mini-ITX boards (Embedded and Socket) will fit in this chassis. Tower CPU coolers up to 165 mm tall supported.

Full case comparison chart

The Node 304 has room for up to 6 hard drives, can take full size ATX PSUs and fit long graphic cards. The chassis features is equipped with three hydraulic bearing fans, easy-to-clean air filters in all intakes, two front USB 3.0 ports and a stunning and functional Scandinavian design. The Node 304 can be used as the basis for a cool-running file server, a stylish and quiet home theatre PC or a powerful gaming system.

Bays: Supports up to 6 drives: 3x Hard Drive Mounting Brackets can each support 2x 3.5in HDD or 2.5in HDD/SSD.

Cooling: 3x Silent Series R2 hydraulic bearing fans included (2x 92mm up to 1300 RPM in front panel, 1x 140mm up to 1000 RPM in rear of case). Integrated 3 position fan controller. Front Fan Filter. PSU Air Intake Filter (underneath chassis). GPU Air Intake Filter.

Front Panel: Aluminium front panel with Blue Power/HDD LED.

Side of Front Panel: 2x 3.5mm Audio (Mic and Headphone); 2x USB 3.0 (Internal 3.0 to 2.0 adapter included); Power Button.

Rear Panel: 3 way Fan Controller Switch, C14 Power Cable Socket (connects to ATX PSU with internal extension cable).

Power Supply not included: Requires an ATX PSU, up to 160mm in length (To fit in combination with a long graphics card, PSUs with modular connectors on the back typically need to be shorter than 160mm). The Fractal Design Integra M ATX PSUs we stock are ideally suited at 140mm in length.

Graphics Card support: Graphics cards, up to 310mm in length, when 1 Hard Drive Mounting Bracket is removed. Graphics cards longer than 170 mm will conflict with PSUs longer than 160mm. Please check your graphics card and power supply connectors as an adapter cable may be required.

Measurements (W x H x D): 250 x 210 x 374mm (9.84in x 8.23in x 14.72in). Volume: 19.63 litres

Supported boards: Not recommended: Gigabyte GA-H170N-WIFI and GA-Z170N-WIFI. Both these boards have a sideways mounting SATA position close to the power supply position which can cause problems with SATA cabling. All other Mini-ITX boards (Embedded and Socket) will fit in this chassis. Tower CPU coolers up to 165 mm tall supported.

Full case comparison chart

Full case comparison chart