Mini-ITX Accessories

Akasa 7106HP Low Profile Socket 775/1150/1155/1156 CPU Cooler
Akasa K25 Low Profile Socket 775/1150/1155/1156 CPU Cooler
Dynatron K2 1U Socket 115x Side Blower Cooler
Fractal Design 40mm Silent Series Cooling Fan
Zalman Fan Mate 2 Adjustable Fan Speed Controller
Short Molex HDD to 12V P4 Power Cable
Dual USB 2.0 & Dual Firewire PCI Backplate
Serial Port on PCI Backplate (Intel pin-out)
Serial Port on PCI Backplate (Jetway pin-out)
Serial Port on Low Profile PCI Backplate
Mini SATA Cable for SATA Slimline Optical Drives
40cm Mini SATA Cable for SATA Slimline Optical Drives
Dual 2.5in SATA HDD to 3.5in HDD Bay Mounting Kit

Akasa 7106HP Low Profile Cooler suitable for Socket 775/1155/1156 Boards

Akasa 7106HP Low Profile Cooler for Socket 775/1155/6
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

Akasa 7106HP Low Profile, Low Noise 29.5mm High Cooler suitable for Intel Socket 775, 1150, 1155 and 1156 motherboards fitted with up to 77W TDP processors.

Fast heat-absorbing copper centre and radiant styled aluminium fins for quick heat dissipation. Embedded 8cm PWM fan with S-Flow blades and long life HDB bearing. Intel approved push pins provide maximum compatibility. Pre-applied high performance thermal compound ensures clean and easy installation.

Compatible motherboards: All Socket 775, 1155 and 1156 Mini-ITX Motherboards with up to 77W TDP Processor fitted.

Case Compatibility: Suitable for use in a low profile case (e.g. M350) when combined with an up to 77W TDP processor, and suitable power supply (e.g. picoPSU-150-XT and 150W AC Adapter). Will work in a 1U chassis though we recommend using the Dynatron K2 Side Blower fan.

CPU Compatibility: Intel Socket 1155 (and 775, 1150 and 1156) processors up to 77W TDP - for example Pentium G620, Core i3-2100, i5-2400S, i5-2405S, i5-3450S, i7-3770S. Not compatible with 84W and 95W TDP processors. Not required with *Retail* Intel processors with 'T' at end of product name as these are provided with a similar low profile heatsink (e.g. G630T, i3-2100T, i3-2120T).

Specifications: Fan speed: 600 - 3000 RPM (PWM controlled); Max airflow: 33.50 CFM (56.7 m3/h); Noise level: 18.9 - 31.9 dB(A); Dimensions: 87.2 x 85.2 x 29.5 mm.

Akasa K25 Low Profile Cooler suitable for Socket 775/1155/1156 Boards

Akasa K25 Low Profile Cooler for Socket 775/1155/6
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

Akasa K25 Low Profile, Low Noise 29.5mm High Cooler suitable for Intel Socket 775, 1150, 1155 and 1156 motherboards fitted with up to 77W TDP processors.

The Akasa K25 and 7106HP are identical in thermal design and mechanical specification. The K25 has a striking black and yellow design - why not try it in combination with the M350 chassis!

Fast heat-absorbing copper centre and radiant styled aluminium fins for quick heat dissipation. Embedded 8cm PWM fan with S-Flow blades and long life HDB bearing. Intel approved push pins provide maximum compatibility. Pre-applied high performance thermal compound ensures clean and easy installation.

Compatible motherboards: All Socket 775, 1155 and 1156 Mini-ITX Motherboards with up to 77W TDP Processor fitted.

Case Compatibility: Suitable for use in a low profile case (e.g. M350) when combined with an up to 77W TDP processor, and suitable power supply (e.g. picoPSU-150-XT and 150W AC Adapter). Will work in a 1U chassis though we recommend using the Dynatron K2 Side Blower fan.

CPU Compatibility: Intel Socket 1155 (and 775, 1150 and 1156) processors up to 77W TDP - for example Pentium G620, Core i3-2100, i5-2400S, i5-2405S, i5-3450S, i7-3770S. Not compatible with 84W and 95W TDP processors. Not required with *Retail* Intel processors with 'T' at end of product name as these are provided with a similar low profile heatsink (e.g. G630T, i3-2100T, i3-2120T).

Specifications: Fan speed: 600 - 3000 RPM (PWM controlled); Max airflow: 33.50 CFM (56.7 m3/h); Noise level: 18.9 - 31.9 dB(A); Dimensions: 87.2 x 85.2 x 29.5 mm.

Dynatron K2 1U Side Blower Cooler suitable for Socket 115x Boards

Dynatron K2 1U Side Blower Heatsink for Socket 1155/1156
£29.00 
  £34.80 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

Dynatron K2 Low Profile, 27.8mm High Side Blower Cooler suitable for fitting Intel Socket 1150, 1155 and 1156 motherboards with up to 73W TDP processors into a 1U Chassis.

Long life two-ball bearing fan draws the cool air though the fins and extracts hot air to one side to support chassis airflow. Intel approved push pins provide maximum compatibility. Pre-applied high performance TIG830SP thermal compound ensures clean and easy installation.

Case Compatibility: Side Blower design suitable for use in a 1U chassis. Tip: angle the K2 to force air out of the rear of the chassis.

Compatible motherboards: All Socket 1155 and 1156 Mini-ITX Motherboards with up to 73W TDP Processor fitted.

Specifications: Fan speed: 1000 RPM (at 20% Duty Cycle); 2500 RPM (at 50%); 4000 RPM (at 100%) (PWM controlled); Airflow: 8.3 CFM (at 50%) - 11.9 CFM (at 100%); Air Pressure: 0.087 inch-H2O (at 20%); 0.453 inch-H2O (at 50%); 0.929 inch-H2O (at 100%); Noise level: 37.8 dBA (at 50%) - 44.0 dbA (at 100%); Power Consumption: 0.6 W (at 20%); 1.8 W (at 50%); 4.8 W (at 100%); Weight: 380g; Fan Dimensions: 75 x 75 x 15mm; Overall Dimensions: 82.6 x 81 x 27.8 (H) mm.

Fractal Design 40mm Silent Series Cooling Fan

40mm Silent Series Cooling Fan for M350 Enclosure
£5.50 
  £6.60 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

Fractal Design "Silent Series" case fan compatible with the M350 chassis. Also useful for other enclosures and self builds and as a replacement for some motherboards. Developed to deliver sufficient airflow and still keep a low noise level. Supplied with four fan screws.

Can always be fitted into the front of the M350 behind the front panel, or onto a standard M350 HDD/Fan Bracket where space is available above the board. You will require a spare 3pin or 4pin fan header. All our current Mini-ITX boards have at least one spare.

Specifications: Air volume at full speed (12V): 3.8 CFM 10%; Noise level at full speed (12V): 13.0 dB(A); Fan speed at full speed (12V), 4000 RPM 10%; Fan measurements: 40mm x 40mm x 10mm; Approximate cable length: 30cm; Power connector: 3pin; Mounting hardware included: Screws; Rated voltage: 12V DC.

Zalman Fan Mate 2 Adjustable Fan Speed Controller

Zalman FAN MATE 2
£4.50 
  £5.40 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

The Zalman FAN MATE 2 is an adjustable fan speed connector, allowing you to control the speed of your CPU fan. We've been using these little beauties for months now to reduce the volume of our CPU fans to practically nothing - who needs passive cooling anyway?

Manufacturer's Specifications

Short Molex HDD to 12V P4 Power Cable

Short Molex HDD to 12V P4 Power Cable
£3.50 
  £4.20 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

Short (48mm) Molex HDD to 4-pin 12V P4 Power Connector Cable.

Compatibility: Suitable for Mini-ITX motherboards that require a P4 power connection, combined with a PSU without a P4 connector but with a spare HDD connector.

Dual USB 2.0 & Dual Firewire PCI Backplate

Dual USB 2.0 & Dual Firewire PCI Backplate
  SPECIAL OFFER - was £7.50
£0.66 
  £0.79 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

PCI Backplate to add extra ports to your Mini-ITX Project. A backplate is provided with the EPIA M, but is not provided with any other boards.

Connects directly to the pin headers on the motherboard, and fits into any spare PCI slot in your case. Provides additional up to 2x USB 2.0 and 2x 1394 Firewire connectors, depending on your specific motherboard.

Serial Port on PCI Backplate (Intel pin-outs)

Serial Port on PCI Backplate
£8.00 
  £9.60 inc. VAT
  IN STOCK (Checked 20:21 BST)

Larger image

 

DB9 Serial Port on PCI Backplate with ribbon cable and IDC10 connector.

Compatibility: Suitable for a Mini-ITX motherboards with serial (COM) header connections meeting the Intel specification (generally Foxconn, Gigabyte, Intel), and Mini-ITX chassis with standard PCI slots - most of our 1U chassis for example (including C1-RACK, all versions of C2-RACK).

Not compatible with Jetway or Zotac boards.

Serial Port on PCI Backplate (Jetway pin-outs)

Serial Port on PCI Backplate
£9.50 
  £11.40 inc. VAT
  IN STOCK (Checked 20:21 BST)

Larger image

 

DB9 Serial Port on PCI Backplate with ribbon cable and IDC10 connector.

Compatibility: Suitable for a Mini-ITX motherboards with serial (COM) header connections meeting the Jetway specification (generally Jetway or Zotac), and Mini-ITX chassis with standard PCI slots - most of our 1U chassis for example (including C1-RACK, all versions of C2-RACK).

Not compatible with Foxconn, Gigabyte or Intel boards.

Serial Port on Low Profile PCI Backplate (Intel pin-outs)

Serial Port on Low Profile PCI Backplate
£8.00 
  £9.60 inc. VAT
  IN STOCK (Checked 20:21 BST)

Larger image

 

DB9 Serial Port on Low Profile PCI Backplate with 23cm ribbon cable to IDC10 connector.

Compatibility: Suitable for a wide selection of Mini-ITX motherboards with serial (COM) header connections meeting the Intel specification (generally Foxconn, Gigabyte, Intel), and Mini-ITX chassis with low profile PCI slots (such as the Jou Jye 528i and 568i or Antec ISK-300 65W and ISK-300 150W). Not compatible with Jetway or Zotac boards.

Mini SATA Cable for SATA Slimline Optical Drives

Mini SATA Cable for SATA Slimline Optical Drives
£7.50 
  £9.00 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

This cable allows you to connect a Slimline SATA Optical Drive to your Mini-ITX motherboard. The single end consists of a standard SATA data connector and a Mini SATA power connector (smaller than a standard SATA power connector). The other end consists of a standard SATA data connector and a 4 pin Molex HDD power connector.

For connecting motherboards with SATA ports to SATA Slimline Optical Drives.

Cable length: 150mm.

40cm Mini SATA Cable for SATA Slimline Optical Drives

Mini SATA Cable for SATA Slimline Optical Drives
£9.50 
  £11.40 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

Suitable for use in rackmount chasiss where cables need to be slightly longer.

This cable allows you to connect a Slimline SATA Optical Drive to your Mini-ITX motherboard. The single end consists of a standard SATA data connector and a Mini SATA power connector (smaller than a standard SATA power connector). The other end consists of a standard SATA data connector and a 4 pin Molex HDD power connector.

For connecting motherboards with SATA ports to SATA Slimline Optical Drives.

Cable length: 400mm. Picture is of shorter cable!

Dual 2.5in SATA HDD to 3.5in HDD Bay Mounting Kit with Molex to 2x SATA Cable

Dual 2.5in SATA HDD to 3.5in HDD Bay Mounting Kit
£15.00 
  £18.00 inc. VAT
  IN STOCK (Checked 20:21 BST)
 

This kit enables you to fit two 2.5 inch SATA HDDs into one 3.5 inch drive bay.

Molex to 2x SATA Cable cable included.

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.


Reckoner

Cards accepted:
Secure Shopping:

Contact Us

Store: +44 (0) 845 475 8 475

Store enquiries: store@mini-itx.com

Other enquiries: feedback@mini-itx.com

Visit the Store

Click here to enter the online store

Social

Follow us on Twitter!

Join our Mailing List

Copyright: All content on this site is Copyright © 2002-2014 Mini-ITX.com and respective owners, all rights reserved.