Home | 1U Servers | Network Servers | NA506 & NA510

NA500 1U Network Server Appliance
6x 2.5Gb Intel LAN, Short Depth Chassis

NA500 1U Short Depth 6x 2.5Gb LAN Server Appliances available as components only or as fully built and tested systems with extended 3 year warranty.

Also available: NA200 Network Server Appliances with 4x Gb LAN

Low power consumption system powered by a powerful 10W TDP, 4 Core, 4 Thread 2.0GHz (2.6GHz Burst) Intel Celeron J6412 processor with 6x Intel i225V Gigabit LAN ports (expandable to 10 ports with 4 additional i211AT Gigabit LAN ports), up to 32GB memory, 2.5in and M.2 Type 2242 (NVMe/SATA) drive bays and compatibility with a wide range of Linux and Windows Operating Systems.

Short Depth 1U Chassis

  • 25cm (9.84in) Deep 1U Rackmount Chassis
  • Premium Grade Steel Construction
  • Unbranded Front and Rear Panels
  • Front Mounted Connector 'Appliance' Design
  • Internal Drive Bay supports 1x 2.5in HDD or SSD (up to 9.5mm z-height)
  • Up to 3x 40x20mm 8 CFM / 7000RPM chassis fans can be used in demanding environments
  • High Quality 250W Seasonic Flex-ATX PSU
  • 17.8W idle, 21.5W load power consumption
  • 430 x 250 x 44mm (W x D x H), 4.73 Litres, 3.6 Kg

Standard Chassis Connectors

  • 1x Serial RJ45 Connector (1x RS232, on front panel)
  • HDMI Graphics Connector (1920x1080 @ 60Hz) Build tip: align white dot on cable with CPU heatsink
  • 1x USB 2.0 and 1x USB 3.0 Gen 2 Connectors
  • 6x Intel i225V 2.5Gb Ethernet Ports
  • 1x 8 bit GPIO DB9 Connector
  • 2x Serial DB9 Connectors (1x RS232, 1x RS232/422/485)
  • Power & HDD Activity LEDs on front panel, or rear
  • Power Switch on Rear

Options

  • Additional 4x Intel i211AT Gigabit Ethernet Ports
  • 3 way fan splitter cable to control speed of all 3 fans at once

Motherboard Connectors

  • Long availability industrial motherboard
  • Up to 32GB DDR4 3200MHz System Memory
  • 1x SATA 6Gb/s Storage Connector
  • M.2 Type-M 2242 (PCIe 3.0 x2 NVMe/SATA) Storage Slot (middle slot)
  • M.2 Type-B 3042 Port & paired SIM Card Holder
  • M.2 Type-E 2230 WiFi Connector
  • 1x Fan Header Connector (can control all 3 fans with optional cable)

OS Support

  • CentOS 9.0+
  • Debian 11.3+
  • Fedora 36-1.5+
  • FreeBSD 13.1+
  • OPNSense 22.1.2+
  • OpenSUSE 15.4+
  • pfSense 2.6.0+ (disable Secure Boot in BIOS)
  • Ubuntu 22.04+
  • Windows 10 64-bit (LAN drivers required after install)
  • Win 10 IoT Enterprise 64-bit (LAN drivers required after install)
  • Windows 11 64-bit

Motherboard Manual (PDF)

Windows Drivers:

Linux drivers are not required if supported versions are used.

Built Systems include Extended 3 Year Warranty

  • All built systems provided with Full 3 Year No-Quibble RTB Warranty
Configure NA500 Server Appliance

Total Price:
1 NA500 Server Appliance

NA506 or NA510 1U Short Depth 4 or 8 LAN Server Appliance.

Fanless 2.0GHz (2.6GHz Burst) Intel Quad Core J6412 processor, 6x Intel i225V 2.5Gb LAN ports (expandable to 10x ports), up to 32GB DDR4 3200MHz memory, 2x drive bays and compatibility with a wide range of Operating Systems.

2 Memory
3 LAN Ports
4 M.2 Type 2242 NVMe/SATA drive

Tip: PCIe/NVMe drives have much faster access speeds than SATA drives.

5 Hard Drive or Solid State Storage
6 Fan Splitter Cable

The PSU comes with six fan outputs, with all three fans pre-connected to run at full speed. The motherboard features a single controllable fan header. Using this cable, you can adjust the speed of all three fans from ~30% to 100% by linking the fan header to each fan. Without the cable, one fan can be controlled. The NA500 is a low power consumption device and can usually function in desktop environments without any fans.

7 Power Cord
8 Components or Pre-Assembled?

Don't see what you want here? Send us an email with as much information as possible, and we'll try and get it for you.